[Paparazzi-devel] Build errors with master branch (28/02/2013)

[Noah Martin]

Hi paparazzi community,
I make a git clone with the last git master branch  (this day at 10 am). I selected a Quad_LisaM_2 config. When I build I obtain some errors.
Here is below a copy paste of paparazzi Center after building:


##################################################

 FLIGHT PLAN: Booz Test Enac
##################################################
BUILD /home/Workspace/paparazzi_github/var/Quad_LisaM_2/flight_plan.xml
make[1]: Leaving directory `/home/Workspace/paparazzi_github'
cd sw/airborne; make TARGET=ap all
Using "arch/stm32/lisa-m.ld" as ldscript for target "ap".
make[1]: Entering directory `/home/Workspace/paparazzi_github/sw/airborne'
DEPEND /home/Workspace/paparazzi_github/var/Quad_LisaM_2/ap/.depend
make[1]: Leaving directory `/home/Workspace/paparazzi_github/sw/airborne'
Using "arch/stm32/lisa-m.ld" as ldscript for target "ap".
make[1]: Entering directory `/home/Workspace/paparazzi_github/sw/airborne'

Using CC   = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-gcc
Using LD   = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-gcc
Using CP   = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-objcopy
Using DMP  = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-objdump
Using NM   = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-nm
Using SIZE = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-size
GCC version:
arm-none-eabi-gcc (Linaro GCC 4.6-2011.09-1) 4.6.2 20110908 (prerelease)

CC /home/Workspace/paparazzi_github/var/Quad_LisaM_2/ap/mcu.o
CC /home/Workspace/paparazzi_github/var/Quad_LisaM_2/ap/state.o
CC /home/Workspace/paparazzi_github/var/Quad_LisaM_2/ap/firmwares/rotorcraft/main.o
In file included from ./firmwares/rotorcraft/telemetry.h:888:0,
                 from firmwares/rotorcraft/main.c:37:
/home/Workspace/paparazzi_github/var/Quad_LisaM_2/generated/settings.h:14:42: fatal error: nps/nps_autopilot_rotorcraft.h: No such file or directory
compilation terminated.
make[1]: *** [/home/Workspace/paparazzi_github/var/Quad_LisaM_2/ap/firmwares/rotorcraft/main.o] Error 1
make[1]: Leaving directory `/homeWorkspace/paparazzi_github/sw/airborne'
make: *** [ap.compile] Error 2
make: Leaving directory `/home/Workspace/paparazzi_github'

FAILED 'make -C /home/Workspace/paparazzi_github -f Makefile.ac AIRCRAFT=Quad_LisaM_2 ap.compile' with code 2

Thank you very much for your help!!!!

Noah.