[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] Baro MS5611-01BA01
From: |
Árni Þorvaldsson |
Subject: |
Re: [Paparazzi-devel] Baro MS5611-01BA01 |
Date: |
Tue, 5 Feb 2013 20:34:17 +0000 |
Hi sorry my mistake, the version is Paparazzi version v4.9_devel-419-gc2d60af
I got the sensors from http://sander-electronic.de/be00067.html
How do I check if the adress is correct?
Regards Arni
________________________________
Frá: address@hidden address@hidden fyrir hönd Eduardo lavratti address@hidden
Sent: 5. febrúar 2013 20:19
To: Paparazzi developer forum
Efni: Re: [Paparazzi-devel] Baro MS5611-01BA01
first of all, where you get your sensor ?
The address used are correct ?
second, i think you pass the version of GIT program not the version of REPO
> From: address@hidden
> To: address@hidden
> Date: Tue, 5 Feb 2013 18:06:44 +0000
> Subject: [Paparazzi-devel] Baro MS5611-01BA01
>
> Hi
> I am still trying to get messages from my baro without any luck.
> My git version 1.7.9.5
> I am only trying to get the messages from the sensor displayed in messages
> tool (not use it during the flight). I don't get any errors, just no message
> from the sensor.
> my wiring is as follow:
> vdd-5v
> gnd-gnd
> SDI/SDA-SDA
> SCLK-SCL
>
> If anyone has an idea what to try to fix this, please tell me:)
>
> Here is my firmware part:
>
> <!DOCTYPE airframe SYSTEM "airframe.dtd">
>
> <airframe name="Funjet Tiny 2.11">
>
> <firmware name="fixedwing">
> <define name="SENSOR_SYNC_SEND"/>
> <define name="USE_AIRSPEED"/>
> <target name="sim" board="pc"/>
>
> <target name="ap" board="tiny_2.11">
> <define name="USE_I2C0"/>
> <define name="USE_I2C1"/>
> </target>
>
> <subsystem name="radio_control" type="ppm"/>
> <subsystem name="joystick"/>
>
> <!-- Communication -->
> <subsystem name="telemetry" type="transparent"/>
> <subsystem name="imu" type="ppzuav"/>
>
>
> <!-- Actuators are automatically chosen according to board-->
> <subsystem name="control"/>
> <!-- Sensors -->
> <subsystem name="ahrs" type="float_dcm"/>
> <subsystem name="gps" type="ublox"/>
> <subsystem name="ins" type="alt_float"/>
> <subsystem name="navigation"/>
>
>
> </firmware>
>
> <modules>
> <load name="infrared_adc.xml"/>
> <load name="baro_ms5611_i2c.xml"/>
> <load name="airspeed_ets.xml"/>
> </modules>
>
> <firmware name="setup">
> <target name="tunnel" board="tiny_2.11"/>
> <target name="setup_actuators" board="tiny_2.11"/>
> </firmware>
>
>
> regards Arni
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
- [Paparazzi-devel] Baro MS5611-01BA01, Árni Þorvaldsson, 2013/02/05
- Re: [Paparazzi-devel] Baro MS5611-01BA01, Eduardo lavratti, 2013/02/05
- Re: [Paparazzi-devel] Baro MS5611-01BA01,
Árni Þorvaldsson <=
- Re: [Paparazzi-devel] Baro MS5611-01BA01, Avinash Rao, 2013/02/05
- Re: [Paparazzi-devel] Baro MS5611-01BA01, Eduardo lavratti, 2013/02/05
- Re: [Paparazzi-devel] Baro MS5611-01BA01, Árni Þorvaldsson, 2013/02/05
- Re: [Paparazzi-devel] Baro MS5611-01BA01, Árni Þorvaldsson, 2013/02/06
- Re: [Paparazzi-devel] Baro MS5611-01BA01, Tilman Baumann, 2013/02/06
- Re: [Paparazzi-devel] Baro MS5611-01BA01, Árni Þorvaldsson, 2013/02/06