From: address@hidden
Date: Wed, 1 Feb 2012 10:23:59 -0800
To: address@hidden
Subject: Re: [Paparazzi-devel] Where to get JTAG adapter and Picoblade harness?
Hi,
The Lisa/M 2.0 will be coming with a DFU USB boot loader from us. So you will be able to flash the firmware without having a JTAG adapter.
Also the Floss-JTAG adapters will be available from us for those who want do do debugging. Still I recommend to everyone who want's to do serious debugging to do themselves a favor and get a black magic probe http://www.blacksphere.co.nz/main/blackmagic it is seriously an amazing tool!
Picoblade precrimped wires should be available for purchase from us before the end of this week. (these are nice and flexible and temperature resistant, teflon coated wires)
Cheers Esden
--
Transition Robotics Inc.
http://transition-robotics.com
the makers of the Quadshot
Co-Founder, Embedded systems Engineer
Mobile: +1 831 440 7454
Skype: esdentem
On Feb 1, 2012, at 9:47 AM, Tilman Baumann wrote:
> I'm gearing up for the arrival of Lisa/M next month.
>
> Most parts are easy to get. I would appreciate some help though with the following.
> I could perhaps find that stuff myself, but I don't want to get it wrong.
>
> * A USB JTAG adapter that ideally has the right pin header for Lisa.
> * A set of crimped good quality wires on Picoblade connectors for the Lisa Wiring harness. (I say good quality because I don't want stiff flat cables)
>
> Ideally from a source in the EU. (Farnell?)
>
> Thanks for helping
> Tilman
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel