Re: [Paparazzi-devel] Where to get JTAG adapter and Picoblade harness?

[Piotr Esden-Tempski]

Hi,

The Lisa/M 2.0 will be coming with a DFU USB boot loader from us. So you will 
be able to flash the firmware without having a JTAG adapter.

Also the Floss-JTAG adapters will be available from us for those who want do do 
debugging. Still I recommend to everyone who want's to do serious debugging to 
do themselves a favor and get a black magic probe 
http://www.blacksphere.co.nz/main/blackmagic it is seriously an amazing tool!

Picoblade precrimped wires should be available for purchase from us before the 
end of this week. (these are nice and flexible and temperature resistant, 
teflon coated wires)

Cheers Esden

--
Transition Robotics Inc.
http://transition-robotics.com
the makers of the Quadshot
Co-Founder, Embedded systems Engineer
Mobile: +1 831 440 7454
Skype: esdentem

On Feb 1, 2012, at 9:47 AM, Tilman Baumann wrote:

> I'm gearing up for the arrival of Lisa/M next month.
> 
> Most parts are easy to get. I would appreciate some help though with the 
> following.
> I could perhaps find that stuff myself, but I don't want to get it wrong.
> 
> * A USB JTAG adapter that ideally has the right pin header for Lisa.
> * A set of crimped good quality wires on Picoblade connectors for the Lisa 
> Wiring harness. (I say good quality because I don't want stiff flat cables)
> 
> Ideally from a source in the EU. (Farnell?)
> 
> Thanks for helping
> Tilman
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

signature.asc
Description: Message signed with OpenPGP using GPGMail