paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Forced Mode2 on Condition


From: David Conger
Subject: Re: [Paparazzi-devel] Forced Mode2 on Condition
Date: Tue, 24 Jun 2008 15:09:31 -0700

Pascal,

With only a Joystick at the ground station how then is a new aircraft "tuned"?

My understanding is you must set mechanically all the flight surfaces properly for stable flight before AUTO2 is possible. With only a joystick is it possible to fly a model in "manual" or AUTO1?

-David
On Jun 23, 2008, at 10:52 PM, Pascal Brisset wrote:

Hi Christophe,

this is currently not possible since the RC link is the a safety link which gets priority over the autopilot. The simplest way for you would be ... to get rid of the RC receiver. If you want to keep it, you will have to patch the lines in main_fbw.c from line 119 and 127, to disable the RC handling on the desired condition. We are working with Martin Mueller on a way to control the aircraft with a joystick connected to the ground station. It would provide a kind of AUTO1 mode inside AUTO2. Probably some news about it soon ...

--Pascal

Christophe De Wagter wrote:
Dear List,
We would like to disable any manual or auto1 mode when for instance when dist_from_home is larger than 500m. We have a lot of model aircraft clubs in the vicinity and absolutely want to avoid that a perfect auto2 flight is hijacked by accident. I was wondering if there is already an implementation that fits in a flight plan (exception cond="dist_from_home>500" set="mode" val="AUTO2") or if anyone is already using this kind of rule?
Christophe DW
------------------------------------------------------------------------

_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel




_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel





reply via email to

[Prev in Thread] Current Thread [Next in Thread]