Re: [Paparazzi-devel] Funjet Back Plate

[Pascal Brisset]

Hi,

it is a sandwich of plywood-balsa-plywood, about 1mm-6mm-1mm
But your 6mm board should be ok (probably heavy but ...)

--Pascal

Stephen L Hulme wrote:
> Dear Gentlemen
>  
> Could someone kindly tell me what material the back plate, upon which 
> the gyroscope and mini B USB connector is mounted in this photo 
> <http://paparazzi.enac.fr/wiki/index.php/Image:Tiny_v2_1_Funjet.jpg>, 
> is made of? 
> I initially thought it was plywood and subsequently bought a small 
> piece of 6 mm hooppine ply. Unfortunately the cross section profile 
> was different to that
> depicted in the photo, causing me to doubt my initial view and thus 
> seek your help.
>  
> Regards 
>  
> Stephen L Hulme
> ------------------------------------------------------------------------
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>