[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: SSL Error | Handshake Failure

From: Chuck Charleston
Subject: Re: SSL Error | Handshake Failure
Date: Sun, 7 Feb 2016 13:59:52 -0800

Hi Tino,

Thanks for that! I have fixed it now and it is communicating with M/Monit fine. I now however have another error when running monit status:

Cannot create socket to []:2812 -- Connection refused

Same thing if I use the actual external IP or hostname. Never had this issue before so a bit strange though Monit seems to be working fine and I do not use the actual web interface for Monit since I have M/Monit.

I'll keep digging into it but weird that it comes up.

On 7 February 2016 at 13:29, Tino Hendricks <address@hidden> wrote:

I reckon you just restarted monit after a long time with an ssl library updated months before. Which just came into effect now.
There were many updates to the ssl library recently (e.g. which protocols and key lengths are supposed to be valid etc.)

Same happened to me… :-/

> Am 07.02.2016 um 22:24 schrieb Charles Charleston <address@hidden>:
> Hello,
> Had a SSL issue popup today on a server that has been running Monit for 4-5 months with issue. There were no updates or changes to that server or Monit so odd that this happened. Monit communicates with my M/Monit server via SSL and always has. I have checked the configs for both M/Monit and Monit and everything is as it was. The .pem file is still in place.
> Monit runs but can't comminicate with M/Monit and monit status shows:
> address@hidden [~]# monit status
> SSL: write I/O error -- Connection reset by peer
> SSL: write error -- error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure
> There actually was 1 change today but that was just M/Monit trial license expiring, I bought the license and it started working again and weirdly enough at the same time this SSL issue shows up. Has me a bit stumped at the moment so any help would be much appreciated.
> Regards,
> Chuck Charleston
> --
> To unsubscribe:

To unsubscribe:

reply via email to

[Prev in Thread] Current Thread [Next in Thread]