Re: zombie processes

[Josh]

So add the lighttpd start and stop methods to the vlogger service?

So monit does catch and restart zombie processes?  Something I read I
thought implied it could only send an alert but not deal with them.

Thanks,
Josh

On 4/16/06, Martin Pala <address@hidden> wrote:
> Josh wrote:
> > Here is a section from my monit config...
> >
> >   check process lighttpd with pidfile /var/run/lighttpd.pid
> >   start program = "/etc/init.d/lighttpd restart"
> >   stop program = "/etc/init.d/lighttpd stop"
> >     if cpu is greater than 60% for 2 cycles then alert
> >     if cpu > 80% for 5 cycles then restart
> >     if totalmem > 80.0 MB for 5 cycles then restart
> >     if children > 20 then restart
> > #  if loadavg(5min) greater than 10 for 8 cycles then restart
> >     if 3 restarts within 5 cycles then timeout
> >   depends lighttpd_rc
> >   depends lighttpd_bin
> >   depends vlogger
> >   group web
> >
> > check process vlogger
> >   with pidfile /var/run/vlogger.pid
> >
> > ---
> >
> > The problem is vlogger constantly dies (zombie, data error) for the
> > least little thing and I would like that to trigger a restart of
> > lighttpd (because of the dependency).
> >
> > Is anything like this possible?
>
> Just add the start and stop method to the vlogger service definition. In
> the case that vlogger will die, monit will restart it and all its
> dependants as well (see manual for more info)
>
> Martin
>
>
> --
> To unsubscribe:
> http://lists.nongnu.org/mailman/listinfo/monit-general
>


--
This tagline added not by Gmail,
but by Josh because Gmail is cool.