Hi Bernd (that’s ok, no offense taken )
If you have wireshark installed, could you capture and then send us the .pcap logs of a videoconference with linphone and another one with Ekiga so that we have a chance to pinpoint exactly where the problem is?
We’ll see for H263 afterwards.
Best regards,
Sandrine Avakian Software Engineer
Hi Sandrine (omg, all the time i spelled your name wrong. Sorry), that didn't help. I tried all three, udp, tcp and tls. I also created an account and choosed tcp, that didn't help either. What i'd like to do is trying another codec. Like H.263. VP8 is not supported from the other side. How difficult is it to compile another one on windows ? I never did that. Just a few times on linux when installung software from the sources. Do you have a HowTo for that ? Bernd -- Bernd Lentes Systemadministration institute of developmental genetics Gebäude 35.34 - Raum 208 HelmholtzZentrum München address@hidden phone: +49 (0)89 3187 1241 fax: +49 (0)89 3187 2294 Erst wenn man sich auf etwas festlegt kann man Unrecht haben Scott Adams ----- On Sep 7, 2016, at 4:00 PM, Sandrine address@hidden wrote: I see you are not using any linphone sip account that’s why the Ëdit »does not work. In this case, add "; transport=tcp » at the end of the address you are calling e.g : < sip:address@hidden ; transport=tcp >
Sandrine Avakian Software Engineer www.belledonne-communications.com
Le 7 sept. 2016 à 15:29, Lentes, Bernd < address@hidden > a écrit :
Hi Sabrina,
thanks for your support. You are doing a good job. In Options->Preferences->Manage sip accounts i don't find s.th . to switch off tcp. See attached screenshot.
I will test the other stuff and let you know.
Bernd
-- Bernd Lentes
----- On Sep 7, 2016, at 2:55 PM, Sandrine address@hidden wrote:
Hi Bernd,
We think there may be a misunderstanding between linphone and your other equipment. There are a few options to try solve this out.
If the other equipment supports TCP, try using TCP as the transport (Options->Preferences->Manage sip accounts->Edit set transport to TCP).
If not, disable all the other unused codecs (Options,Preferences->Codecs) :video :VP8 for audio only keep the one you want to use enabled, disable the others. We would like you to try out is to explicitly set a bandwidth limit on upload and download of 1Mbits/s (Options->preferences->multimedia settings->bandwidth).
Get back to us to tell us if it’s better.
Sandrine Avakian Software Engineer www.belledonne-communications.com
Le 7 sept. 2016 à 13:31, Lentes, Bernd < address@hidden > a écrit :
Hi Sabrina,
now the log attached. What i found out:
error: 2016-09-07 11:14:22:770 QOSAddSocketToFlow failed to add a flow with error 87 appears several times. What does that mean ? Is it severe ?
Is the following interesting ? ... message: 2016-09-07 11:14:23:315 Using the 'custom' video preset non-tagged message: 2016-09-07 11:14:23:315 target bitrate not set for stream [006330D8] using payload's bitrate is 1500000 message: 2016-09-07 11:14:23:315 Limiting bitrate of video encoder to 1500000 bits/s for stream [006330D8] message: 2016-09-07 11:14:23:315 OpenH264 encoder: Video configuration set: bitrate=1500000bits/s, fps=30,000000, vsize=640x480 message: 2016-09-07 11:14:23:315 MSOpenH264Enc: disabling AVPF warning: 2016-09-07 11:14:23:324 Getting reference signal but no echo to synchronize on. warning: 2016-09-07 11:14:23:324 Not enough ref samples, using zeroes message: 2016-09-07 11:14:23:324 MSAudioMixer [062A5770] is entering bypass mode. message: 2016-09-07 11:14:23:334 Samples are back. ... error: 2016-09-07 11:14:23:433 no such method on filter MSOpenH264Dec, fid=16389 method index=7 error: 2016-09-07 11:14:23:434 no such method on filter MSOpenH264Dec, fid=16389 method index=8 ... message: 2016-09-07 11:14:23:472 LinphoneCall[048F8730] : payload type 96 H264/90000 fmtp=profile-level-id=42801F added to frozen list.
What is "frozen list" ?
RTP audio=[d= 80,0,u= 79,9], video=[d= 65,5,u=1541,4], text=[d= 0,0,u= 0,0] kbits/sec RTCP audio=[d= 0,0,u= 0,0], video=[d= 0,0,u= 0,0], text=[d= 0,0,u= 0,0] kbits/sec message: 2016-09-07 11:14:26:803 Thread processing load: audio=5,020779 video=11,349777 text=0,000000
appears often. Video d (downstream ?) is mostly between 60 - 70 (Kbit/s ?). That's the problem, isn't it ? What's the reason ?
Bernd
--
----- Am 6. Sep 2016 um 16:39 schrieb Sandrine address@hidden :
Hello Bernd,
Did you modify any parameter to control the bandwidth? Options->preferences->multimedia settings ->Bandwith control Could you check what is happening in the linphone debug logs when you start a video call in H264? (Help->debug window) If unclear, please send the logs to me.
Kind regards,
Sandrine Avakian Software Engineer www.belledonne-communications.com
Le 6 sept. 2016 à 16:11, Lentes, Bernd < address@hidden > a écrit :
Hi Sabrina,
thanks for your answer. I'm not used to compiling on windows, so i will not try it. My problem is: we need to participate on a vc. I try to establish it with linphone. The vc system is a Tandberg device. The video stream i get from the tandberg is just 64Kbit/s, which is of course very rare, so quality is poor. My video upload to the tandberg is ok. I try to paste screenshots here: if it's not possible to send this e-Mail i can offer the screenshots as a download.
<7431126.28>
And a screenshot from the Admin Webconsole of the MCU:
<7518382.55> You see a rate limit from 64Kbit/s.
Using Ekiga as a client (which i don't want to use, it's not stable) i have a rate limit of 4.1 Mbit/s. So quality is much better. Anything i can do on that ?
Thanks.
Bernd
----- Am 6. Sep 2016 um 15:17 schrieb Sandrine < address@hidden >:
Hello,
Due to patents issues, H263 is indeed not included in the release.
To have H263 in linphone-desktop, a new build from source has to be made with a few specific compilation options: -DENABLE_FFMPEG -DENABLE_NON_FREE_CODECS -DENABLE_H263.
We believe H264 is still a better alternative though.
Sandrine Avakian Software Engineer www.belledonne-communications.com
Le 6 sept. 2016 à 11:25, Lentes, Bernd < address@hidden > a écrit : Hi,
i'm using linphone 3.10.2 on windows 7 64bit. As video codecs, i just get offered h.264 and vp8. Is there a possibility to use more codecs ? Like H263 ... ?
Thanks.
Bernd
-- Bernd Lentes
_______________________________________________ Linphone-developers mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/linphone-developers
Helmholtz Zentrum Muenchen Deutsches Forschungszentrum fuer Gesundheit und Umwelt (GmbH) Ingolstaedter Landstr. 1 85764 Neuherberg www.helmholtz-muenchen.deAufsichtsratsvorsitzende: MinDir'in Baerbel Brumme-Bothe Geschaeftsfuehrer: Prof. Dr. Guenther Wess, Dr. Alfons Enhsen Registergericht: Amtsgericht Muenchen HRB 6466 USt-IdNr: DE 129521671 _______________________________________________ Linphone-developers mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/linphone-developers
|