Re: Sending data from application to gpsd

[Gary E. Miller]

Yo raaj!

On Tue, 19 May 2020 10:06:18 +0800
raaj lokanathan <address@hidden> wrote:

> I am not sending UBlox command.

Then you are on your own.  Each driver only knows how to send commands
to their type of receiver.

> What I will be doing is send the
> speed info directly from my application to the gpsd.

Oh, same words, different meaning now.

> And the. inside
> my driver_ubx.c I will extract the speed info and form the UBlox
> command before sending it to the receiver.

Good luck with that.  Much easier to have your app just make the
required u-blox command to send.  Then gpsd does not need changing.

RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        address@hidden  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can't measure it, you can't improve it." - Lord Kelvin

pgpPTY2kAAGAZ.pgp
Description: OpenPGP digital signature