|
From: | raaj lokanathan |
Subject: | Re: Sending data from application to gpsd |
Date: | Tue, 19 May 2020 10:12:11 +0800 |
Hi Gary,I am not sending UBlox command. What I will be doing is send the speed info directly from my application to the gpsd. And the. inside my driver_ubx.c I will extract the speed info and form the UBlox command before sending it to the receiver.On Tue, 19 May 2020 at 01:13, Gary E. Miller <address@hidden> wrote:Yo raaj!
On Tue, 19 May 2020 01:09:07 +0800
raaj lokanathan <address@hidden> wrote:
> Does gpsd supports a way to send a data from application to my gpsd?
Of course. Things like NTRIP, zerk, ubxtool, gpsctl, etc. all send
data to your receiver throught gpsd.
> Currently I saw there is only the gpsdctl which can either add or
> remove device only.
Nope. Not "only" by any definition. RTFM.
> Example now for dead reckoning. I need to get the
> speed info externally. For that I have my own handler. Tommy handler
> will read the speed info and then it will send it to the gpsd. Then
> the ubx driver will receive it and then pass it to the gnss receiver
> which is the dr engine.
What ublox command do you intend to send with that info?
> I am stuck at the first part where sending to the gpsd.
Without knowing the language you are using, not much advice can be
given.
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
address@hidden Tel:+1 541 382 8588
Veritas liberabit vos. -- Quid est veritas?
"If you can't measure it, you can't improve it." - Lord Kelvin
--Thanks and regards,Raaj Lokanathan
[Prev in Thread] | Current Thread | [Next in Thread] |