[gpsd-users] Need help synchronizing ntpd with gpsd

[Dhiraj Khanna]

Hello need help here. Working on FC12 and can't get ntp to sync with gpsd.
Output of /usr/sbin/gpsd -n -N -D2 /dev/ttyS0 is shown below :-

gpsd: launching (Version 2.39)
gpsd: listening on port gpsd
gpsd: Priority setting failed.
gpsd: running with effective group ID 0
gpsd: running with effective user ID 0
gpsd: opening GPS data source at '/dev/ttyS0'
gpsd: speed 9600, 8N1
gpsd: garmin_gps Linux USB module not active.
gpsd: gpsd_activate(1): opened GPS (5)
gpsd: ntpd_link_activate: 0
gpsd: => Probing device subtype 0
gpsd: can't use GGA time until after ZDA or RMC has supplied a year.
gpsd: => Probing device subtype 1
gpsd: => Probing device subtype 2
gpsd: => Probing device subtype 3
gpsd: => Probing device subtype 4
gpsd: => Probing device subtype 5
gpsd: => Probing device subtype 6
gpsd: => Probing device subtype 7
gpsd: => Probing device subtype 8

ntp.conf is attached and the output of ntpq -p is shown below :-

     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
 SHM(0)          .NMEA.           0 l    -   16    0    0.000    0.000   0.000

I am clueless here and would appreciate some help please.
Thanks

Dhiraj

ntp.conf
Description: Binary data