[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply
|
From: |
Albert Chu |
|
Subject: |
Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply-status |
|
Date: |
Tue, 15 Sep 2015 15:50:10 -0700 |
On Tue, 2015-09-15 at 09:01 -0500, Scott Silverman wrote:
> I ran the command with debug, but there's no difference at all between
> the output when the cable is plugged/unplugged.
>
>
> I've also received a follow-up from SuperMicro who tell me the
> following should work (but they specifically say "don't use it"
> because of some vague statement that it "could affect other
> functionality").
>
>
> PSU1: 0x06 0x52 0x07 0xb0 0x02 0x79
>
> PSU2: 0x06 0x52 0x07 0xb2 0x02 0x79
>
>
>
> Returns of 00 or 02 mean good, anything else (or failed command) mean
> bad, according to SM.
>
>
> I tested it, and I get a return of "00 00" on a good PSU1 and a "02
> 00" on a good PSU2. A bad PSU1 returns "4b 28".
Hmmmm ... this is disconcerting, because you'd like some consistent
output.
I take it both bytes have to be 00 or 02? Otherwise there's no point in
reading two bytes (that's what the 0x02 is in the raw command).
Nevertheless, I added it based on this assumption. Could you give it a
shot? It's in a different branch than last time:
svn co http://svn.savannah.gnu.org/svn/freeipmi/branches/Release-1_4_0_branch/
freeipmi
cd freeipmi
./autogen.sh
./configure
make
ipmi-oem/ipmi-oem supermicro get-power-supply-status2 1
ipmi-oem/ipmi-oem supermicro get-power-supply-status2 2
Al
>
>
> That said, given their warning of "don't use this", I don't know what
> good that is.
>
>
>
>
>
>
>
> Thanks,
>
>
> Scott Silverman | IT | Simplex | 312-360-2444
> 230 S. LaSalle St., Suite 4-100, Chicago, IL 60604
>
> On Thu, Sep 10, 2015 at 11:51 AM, Albert Chu <address@hidden> wrote:
> On Thu, 2015-09-10 at 09:31 -0500, Scott Silverman wrote:
> > I had a chance to test pulling the power cable, it seems
> that what
> > SuperMicro gave me is not useful, as even with the power
> cable pulled,
> > it still returns "00". I will reach out to them and see if I
> can get
> > some clarification, but I would suggest not putting in the
> change as
> > is.
>
> The change is already in there, but we can change it once we
> have more
> info.
>
> If you do a --debug on the good node vs bad node, maybe we can
> figure it
> out. Perhaps there are additional bytes returned.
>
> Al
>
> >
> >
> >
> >
> >
> >
> > Thanks,
> >
> >
> > Scott Silverman | IT | Simplex | 312-360-2444
> > 230 S. LaSalle St., Suite 4-100, Chicago, IL 60604
> >
> > On Wed, Sep 9, 2015 at 4:24 PM, Albert Chu <address@hidden>
> wrote:
> > Cool, it'll be in the next release of FreeIPMI.
> >
> > Al
> >
> > On Wed, 2015-09-09 at 14:41 -0500, Scott Silverman
> wrote:
> > > It appears to work, but the 00 is in fact a "good"
> state. I
> > can't pull
> > > a power cable just now to confirm what a "bad"
> state is, but
> > I'll let
> > > you know tomorrow.
> > >
> > >
> > > Thanks for such a prompt response, it's much
> appreciated.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Thanks,
> > >
> > >
> > > Scott Silverman | IT | Simplex | 312-360-2444
> > > 230 S. LaSalle St., Suite 4-100, Chicago, IL 60604
> > >
> > > On Wed, Sep 9, 2015 at 1:25 PM, Albert Chu
> <address@hidden>
> > wrote:
> > > On Wed, 2015-09-09 at 13:16 -0500, Scott
> Silverman
> > wrote:
> > > > Actually, it seems that 00 is good in
> this case. I
> > asked
> > > supermicro
> > > > for confirmation on all possessible
> values but
> > haven't heard
> > > back
> > > > yet.
> > >
> > > Ok, just give it a shot with what's there.
> If I
> > have to
> > > reverse the
> > > values, that's just a quick simple change.
> > >
> > > > I will test, probably tomorrow, and get
> back to
> > you, thanks!
> > >
> > > Great!
> > >
> > > Al
> > >
> > > >
> > > > Scott Silverman | IT | Simplex |
> 312-360-2444
> > > >
> > > > 230 S. LaSalle St., Suite 4-100,
> Chicago, IL 60604
> > > >
> > > > On Sep 9, 2015 1:12 PM, "Albert Chu"
> > <address@hidden> wrote:
> > > > That's not too far removed from
> the other
> > > motherboard. From
> > > > ipmi-oem's
> > > > comments:
> > > >
> > > > /* Supermicro OEM
> > > > * From Supermicro Engineer
> > > > *
> > > > * Request
> > > > *
> > > > * 0x06 - network function
> > > > * 0x52 - cmd (master
> read/write)
> > > > * 0x07 - (channel = 0, bus id
> = 3, bus
> > type =
> > > private)
> > > > * 0x?? - slave address
> > > > * - 0x70 - ps 1
> > > > * - 0x72 - ps 2
> > > > * - 0x74 - ps 3
> > > > * 0x01 - read count
> > > > * 0x0c - data to write ... no
> idea why
> > 0x0c
> > > > *
> > > > * Response
> > > > *
> > > > * 0x52 - cmd
> > > > * 0x?? - Completion Code
> > > > * 0x?? - 0x01 - good
> > > > * - 0x00 - bad
> > > > */
> > > >
> > > > I added yours into a branch of
> FreeIPMI if
> > you could
> > > give it a
> > > > shot. I
> > > > just assumed the good vs bad
> response was
> > the same.
> > > >
> > > > svn co
> > > >
> > >
> >
>
> http://svn.savannah.gnu.org/svn/freeipmi/branches/supermicroipmioempower
> freeipmi
> > > > cd freeipmi
> > > > ./autogen.sh
> > > > ./configure
> > > > make
> > > > ipmi-oem/ipmi-oem supermicro
> > > get-power-supply-status2 1
> > > > ipmi-oem/ipmi-oem supermicro
> > > get-power-supply-status2 2
> > > >
> > > > As an aside, after I realized
> that this
> > was going
> > > through the
> > > > master
> > > > read/write and not some
> arbitrary
> > Supermicro OEM
> > > command, I
> > > > actually can
> > > > add an error message for the 83h
> error
> > code you saw
> > > before.
> > > > So
> > > > hopefully that's taken care of
> when you
> > run the
> > > original. I
> > > > get
> > > >
> > > > # ipmi-oem/ipmi-oem Supermicro
> > > get-power-supply-status 1
> > > >
> Supermicro:get-power-supply-status failed:
> > NAK on
> > > Write
> > > >
> > > > Al
> > > >
> > > > On Wed, 2015-09-09 at 12:09
> -0500, Scott
> > Silverman
> > > wrote:
> > > > > I assume that was the case. If
> it helps,
> > I have
> > > the
> > > > following from
> > > > > SuperMicro (can only confirm
> for the
> > listed board,
> > > I don't
> > > > have any
> > > > > other X10 to test on):
> > > > >
> > > > >
> > > > > For the X10DRU-i+, please try
> the
> > command below:
> > > > >
> > > > > raw 0x06 0x52 0x07 0xb0 0x01
> 0x0c for
> > power
> > > supply 1
> > > > >
> > > > > raw 0x06 0x52 0x07 0xb2 0x01
> 0x0c for
> > power
> > > supply 2
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Thanks,
> > > > >
> > > > >
> > > > > Scott Silverman | IT | Simplex
> |
> > 312-360-2444
> > > > > 230 S. LaSalle St., Suite
> 4-100,
> > Chicago, IL 60604
> > > > >
> > > > > On Tue, Sep 8, 2015 at 12:21
> PM, Albert
> > Chu
> > > <address@hidden>
> > > > wrote:
> > > > > Hi Scott,
> > > > >
> > > > > Thanks for the report.
> > Unfortunately,
> > > since this is
> > > > a
> > > > > Supermicro
> > > > > specific error, not
> much we can
> > do except
> > > wait for a
> > > > potential
> > > > > update of
> > > > > information from
> Supermicro. I
> > can ping
> > > some
> > > > Supermicro folks
> > > > > and see
> > > > > if they can help.
> > > > >
> > > > > Al
> > > > >
> > > > > On Fri, 2015-09-04 at
> 11:18
> > -0500, Scott
> > > Silverman
> > > > wrote:
> > > > > > Running the ipmi-oem
> > supermicro
> > > > >
> get-(pmbus-)power-supply-status
> > > > > > commands against
> newer (X10
> > based)
> > > SuperMicro
> > > > servers
> > > > > results in the
> > > > > > following error:
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > supermicro:get-pmbus-power-supply-status
> > > failed:
> > > > No error
> > > > > message
> > > > > > found for command
> 52h, network
> > function
> > > 06h, and
> > > > completion
> > > > > code 83h.
> > > > > > Please report to
> > > <address@hidden>
> > > > > >
> > > > > >
> > > > > > As requested, I'm
> reporting.
> > > > > >
> > > > > >
> > > > > > I've attached debug
> output for
> > the
> > > regular and the
> > > > pmbus
> > > > > version. Let
> > > > > > me know if there's
> anything I
> > can do to
> > > help
> > > > further.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Thanks,
> > > > > >
> > > > > >
> > > > > > Scott Silverman | IT
> | Simplex
> > |
> > > 312-360-2444
> > > > > > 230 S. LaSalle St.,
> Suite
> > 4-100,
> > > Chicago, IL 60604
> > > > > >
> > > > >
> > > > > > DISCLAIMER: NOTICE
> REGARDING
> > PRIVACY AND
> > > > CONFIDENTIALITY
> > > > > >
> > > > > > The information
> contained in
> > and/or
> > > accompanying
> > > > this
> > > > > communication is
> > > > > > intended only for
> use by the
> > > addressee(s) named
> > > > herein and
> > > > > may contain
> > > > > > legally privileged
> and/or
> > confidential
> > > > information. If you
> > > > > are not the
> > > > > > intended recipient
> of this
> > e-mail, you
> > > are hereby
> > > > notified
> > > > > that any
> > > > > > dissemination,
> distribution or
> > copying
> > > of this
> > > > information,
> > > > > and any
> > > > > > attachments thereto,
> is
> > strictly
> > > prohibited. If
> > > > you have
> > > > > received this
> > > > > > e-mail in error,
> please
> > immediately
> > > notify the
> > > > sender and
> > > > > permanently
> > > > > > delete the original
> and any
> > copy of any
> > > e-mail and
> > > > any
> > > > > printout
> > > > > > thereof. Electronic
> > transmissions cannot
> > > be
> > > > guaranteed to be
> > > > > secure or
> > > > > > error-free. The
> sender
> > therefore does
> > > not accept
> > > > liability
> > > > > for any
> > > > > > errors or omissions
> in the
> > contents of
> > > this
> > > > message which
> > > > > arise as a
> > > > > > result of e-mail
> transmission.
> > Simplex
> > > Trading,
> > > > LLC and its
> > > > > affiliates
> > > > > > reserves the right
> to
> > intercept,
> > > monitor, and
> > > > retain
> > > > > electronic
> > > > > > communications to
> and from its
> > system as
> > > permitted
> > > > by law.
> > > > > Simplex
> > > > > > Trading, LLC is a
> registered
> > Broker
> > > Dealer with
> > > > CBOE and a
> > > > > Member of
> > > > > > SIPC.
> > > > > >
> > >
> _______________________________________________
> > > > > > Freeipmi-devel
> mailing list
> > > > > >
> address@hidden
> > > > > >
> > > >
> > >
> >
> https://lists.gnu.org/mailman/listinfo/freeipmi-devel
> > > > > --
> > > > > Albert Chu
> > > > > address@hidden
> > > > > Computer Scientist
> > > > > High Performance
> Systems
> > Division
> > > > > Lawrence Livermore
> National
> > Laboratory
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > DISCLAIMER: NOTICE REGARDING
> PRIVACY AND
> > > CONFIDENTIALITY
> > > > >
> > > > > The information contained in
> and/or
> > accompanying
> > > this
> > > > communication is
> > > > > intended only for use by the
> > addressee(s) named
> > > herein and
> > > > may contain
> > > > > legally privileged and/or
> confidential
> > > information. If you
> > > > are not the
> > > > > intended recipient of this
> e-mail, you
> > are hereby
> > > notified
> > > > that any
> > > > > dissemination, distribution or
> copying
> > of this
> > > information,
> > > > and any
> > > > > attachments thereto, is
> strictly
> > prohibited. If
> > > you have
> > > > received this
> > > > > e-mail in error, please
> immediately
> > notify the
> > > sender and
> > > > permanently
> > > > > delete the original and any
> copy of any
> > e-mail and
> > > any
> > > > printout
> > > > > thereof. Electronic
> transmissions cannot
> > be
> > > guaranteed to be
> > > > secure or
> > > > > error-free. The sender
> therefore does
> > not accept
> > > liability
> > > > for any
> > > > > errors or omissions in the
> contents of
> > this
> > > message which
> > > > arise as a
> > > > > result of e-mail transmission.
> Simplex
> > Trading,
> > > LLC and its
> > > > affiliates
> > > > > reserves the right to
> intercept,
> > monitor, and
> > > retain
> > > > electronic
> > > > > communications to and from its
> system as
> > permitted
> > > by law.
> > > > Simplex
> > > > > Trading, LLC is a registered
> Broker
> > Dealer with
> > > CBOE and a
> > > > Member of
> > > > > SIPC.
> > > > --
> > > > Albert Chu
> > > > address@hidden
> > > > Computer Scientist
> > > > High Performance Systems
> Division
> > > > Lawrence Livermore National
> Laboratory
> > > >
> > > >
> > > >
> > > > DISCLAIMER: NOTICE REGARDING PRIVACY AND
> > CONFIDENTIALITY
> > > >
> > > > The information contained in and/or
> accompanying
> > this
> > > communication is
> > > > intended only for use by the
> addressee(s) named
> > herein and
> > > may contain
> > > > legally privileged and/or confidential
> > information. If you
> > > are not the
> > > > intended recipient of this e-mail, you
> are hereby
> > notified
> > > that any
> > > > dissemination, distribution or copying
> of this
> > information,
> > > and any
> > > > attachments thereto, is strictly
> prohibited. If
> > you have
> > > received this
> > > > e-mail in error, please immediately
> notify the
> > sender and
> > > permanently
> > > > delete the original and any copy of any
> e-mail and
> > any
> > > printout
> > > > thereof. Electronic transmissions cannot
> be
> > guaranteed to be
> > > secure or
> > > > error-free. The sender therefore does
> not accept
> > liability
> > > for any
> > > > errors or omissions in the contents of
> this
> > message which
> > > arise as a
> > > > result of e-mail transmission. Simplex
> Trading,
> > LLC and its
> > > affiliates
> > > > reserves the right to intercept,
> monitor, and
> > retain
> > > electronic
> > > > communications to and from its system as
> permitted
> > by law.
> > > Simplex
> > > > Trading, LLC is a registered Broker
> Dealer with
> > CBOE and a
> > > Member of
> > > > SIPC.
> > > --
> > > Albert Chu
> > > address@hidden
> > > Computer Scientist
> > > High Performance Systems Division
> > > Lawrence Livermore National Laboratory
> > >
> > >
> > >
> > >
> > >
> > >
> > > DISCLAIMER: NOTICE REGARDING PRIVACY AND
> CONFIDENTIALITY
> > >
> > > The information contained in and/or accompanying
> this
> > communication is
> > > intended only for use by the addressee(s) named
> herein and
> > may contain
> > > legally privileged and/or confidential
> information. If you
> > are not the
> > > intended recipient of this e-mail, you are hereby
> notified
> > that any
> > > dissemination, distribution or copying of this
> information,
> > and any
> > > attachments thereto, is strictly prohibited. If
> you have
> > received this
> > > e-mail in error, please immediately notify the
> sender and
> > permanently
> > > delete the original and any copy of any e-mail and
> any
> > printout
> > > thereof. Electronic transmissions cannot be
> guaranteed to be
> > secure or
> > > error-free. The sender therefore does not accept
> liability
> > for any
> > > errors or omissions in the contents of this
> message which
> > arise as a
> > > result of e-mail transmission. Simplex Trading,
> LLC and its
> > affiliates
> > > reserves the right to intercept, monitor, and
> retain
> > electronic
> > > communications to and from its system as permitted
> by law.
> > Simplex
> > > Trading, LLC is a registered Broker Dealer with
> CBOE and a
> > Member of
> > > SIPC.
> > --
> > Albert Chu
> > address@hidden
> > Computer Scientist
> > High Performance Systems Division
> > Lawrence Livermore National Laboratory
> >
> >
> >
> >
> >
> >
> > DISCLAIMER: NOTICE REGARDING PRIVACY AND CONFIDENTIALITY
> >
> > The information contained in and/or accompanying this
> communication is
> > intended only for use by the addressee(s) named herein and
> may contain
> > legally privileged and/or confidential information. If you
> are not the
> > intended recipient of this e-mail, you are hereby notified
> that any
> > dissemination, distribution or copying of this information,
> and any
> > attachments thereto, is strictly prohibited. If you have
> received this
> > e-mail in error, please immediately notify the sender and
> permanently
> > delete the original and any copy of any e-mail and any
> printout
> > thereof. Electronic transmissions cannot be guaranteed to be
> secure or
> > error-free. The sender therefore does not accept liability
> for any
> > errors or omissions in the contents of this message which
> arise as a
> > result of e-mail transmission. Simplex Trading, LLC and its
> affiliates
> > reserves the right to intercept, monitor, and retain
> electronic
> > communications to and from its system as permitted by law.
> Simplex
> > Trading, LLC is a registered Broker Dealer with CBOE and a
> Member of
> > SIPC.
> --
> Albert Chu
> address@hidden
> Computer Scientist
> High Performance Systems Division
> Lawrence Livermore National Laboratory
>
>
>
>
>
>
> DISCLAIMER: NOTICE REGARDING PRIVACY AND CONFIDENTIALITY
>
> The information contained in and/or accompanying this communication is
> intended only for use by the addressee(s) named herein and may contain
> legally privileged and/or confidential information. If you are not the
> intended recipient of this e-mail, you are hereby notified that any
> dissemination, distribution or copying of this information, and any
> attachments thereto, is strictly prohibited. If you have received this
> e-mail in error, please immediately notify the sender and permanently
> delete the original and any copy of any e-mail and any printout
> thereof. Electronic transmissions cannot be guaranteed to be secure or
> error-free. The sender therefore does not accept liability for any
> errors or omissions in the contents of this message which arise as a
> result of e-mail transmission. Simplex Trading, LLC and its affiliates
> reserves the right to intercept, monitor, and retain electronic
> communications to and from its system as permitted by law. Simplex
> Trading, LLC is a registered Broker Dealer with CBOE and a Member of
> SIPC.
--
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory
- Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply-status, (continued)
- Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply-status, Scott Silverman, 2015/09/09
- Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply-status, Albert Chu, 2015/09/09
- Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply-status, Scott Silverman, 2015/09/09
- Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply-status, Albert Chu, 2015/09/09
- Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply-status, Scott Silverman, 2015/09/09
- Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply-status, Albert Chu, 2015/09/09
- Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply-status, Werner Fischer, 2015/09/10
- Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply-status, Scott Silverman, 2015/09/10
- Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply-status, Albert Chu, 2015/09/10
- Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply-status, Scott Silverman, 2015/09/15
- Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply-status,
Albert Chu <=
- Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply-status, Scott Silverman, 2015/09/22
- Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply-status, Albert Chu, 2015/09/22