Re: [Freeipmi-devel] Issue with ipmi-oem supermicro (pmbus) power-supply-status

[Albert Chu]

On Wed, 2015-09-09 at 13:16 -0500, Scott Silverman wrote:
> Actually, it seems that 00 is good in this case. I asked supermicro
> for confirmation on all possessible values but haven't heard back
> yet. 

Ok, just give it a shot with what's there.  If I have to reverse the
values, that's just a quick simple change.

> I will test, probably tomorrow, and get back to you, thanks!

Great!

Al

> 
> Scott Silverman | IT | Simplex | 312-360-2444
> 
> 230 S. LaSalle St., Suite 4-100, Chicago, IL 60604
> 
> On Sep 9, 2015 1:12 PM, "Albert Chu" <address@hidden> wrote:
>         That's not too far removed from the other motherboard.  From
>         ipmi-oem's
>         comments:
>         
>           /* Supermicro OEM
>            * From Supermicro Engineer
>            *
>            * Request
>            *
>            * 0x06 - network function
>            * 0x52 - cmd (master read/write)
>            * 0x07 - (channel = 0, bus id = 3, bus type = private)
>            * 0x?? - slave address
>            *      - 0x70 - ps 1
>            *      - 0x72 - ps 2
>            *      - 0x74 - ps 3
>            * 0x01 - read count
>            * 0x0c - data to write ... no idea why 0x0c
>            *
>            * Response
>            *
>            * 0x52 - cmd
>            * 0x?? - Completion Code
>            * 0x?? - 0x01 - good
>            *      - 0x00 - bad
>            */
>         
>         I added yours into a branch of FreeIPMI if you could give it a
>         shot.  I
>         just assumed the good vs bad response was the same.
>         
>         svn co
>         
> http://svn.savannah.gnu.org/svn/freeipmi/branches/supermicroipmioempower 
> freeipmi
>         cd freeipmi
>         ./autogen.sh
>         ./configure
>         make
>         ipmi-oem/ipmi-oem supermicro get-power-supply-status2 1
>         ipmi-oem/ipmi-oem supermicro get-power-supply-status2 2
>         
>         As an aside, after I realized that this was going through the
>         master
>         read/write and not some arbitrary Supermicro OEM command, I
>         actually can
>         add an error message for the 83h error code you saw before.
>         So
>         hopefully that's taken care of when you run the original.  I
>         get
>         
>         # ipmi-oem/ipmi-oem Supermicro get-power-supply-status 1
>         Supermicro:get-power-supply-status failed: NAK on Write
>         
>         Al
>         
>         On Wed, 2015-09-09 at 12:09 -0500, Scott Silverman wrote:
>         > I assume that was the case. If it helps, I have the
>         following from
>         > SuperMicro (can only confirm for the listed board, I don't
>         have any
>         > other X10 to test on):
>         >
>         >
>         > For the X10DRU-i+, please try the command below:
>         >
>         >  raw 0x06 0x52 0x07 0xb0 0x01 0x0c for power supply 1
>         >
>         >  raw 0x06 0x52 0x07 0xb2 0x01 0x0c for power supply 2
>         >
>         >
>         >
>         >
>         >
>         >
>         >
>         >
>         >
>         >
>         >
>         > Thanks,
>         >
>         >
>         > Scott Silverman | IT | Simplex | 312-360-2444
>         > 230 S. LaSalle St., Suite 4-100, Chicago, IL 60604
>         >
>         > On Tue, Sep 8, 2015 at 12:21 PM, Albert Chu <address@hidden>
>         wrote:
>         >         Hi Scott,
>         >
>         >         Thanks for the report.  Unfortunately, since this is
>         a
>         >         Supermicro
>         >         specific error, not much we can do except wait for a
>         potential
>         >         update of
>         >         information from Supermicro.  I can ping some
>         Supermicro folks
>         >         and see
>         >         if they can help.
>         >
>         >         Al
>         >
>         >         On Fri, 2015-09-04 at 11:18 -0500, Scott Silverman
>         wrote:
>         >         > Running the ipmi-oem supermicro
>         >         get-(pmbus-)power-supply-status
>         >         > commands against newer (X10 based) SuperMicro
>         servers
>         >         results in the
>         >         > following error:
>         >         >
>         >         >
>         >         >
>         >         > supermicro:get-pmbus-power-supply-status failed:
>         No error
>         >         message
>         >         > found for command 52h, network function 06h, and
>         completion
>         >         code 83h.
>         >         > Please report to <address@hidden>
>         >         >
>         >         >
>         >         > As requested, I'm reporting.
>         >         >
>         >         >
>         >         > I've attached debug output for the regular and the
>         pmbus
>         >         version. Let
>         >         > me know if there's anything I can do to help
>         further.
>         >         >
>         >         >
>         >         >
>         >         >
>         >         > Thanks,
>         >         >
>         >         >
>         >         > Scott Silverman | IT | Simplex | 312-360-2444
>         >         > 230 S. LaSalle St., Suite 4-100, Chicago, IL 60604
>         >         >
>         >
>         >         > DISCLAIMER: NOTICE REGARDING PRIVACY AND
>         CONFIDENTIALITY
>         >         >
>         >         > The information contained in and/or accompanying
>         this
>         >         communication is
>         >         > intended only for use by the addressee(s) named
>         herein and
>         >         may contain
>         >         > legally privileged and/or confidential
>         information. If you
>         >         are not the
>         >         > intended recipient of this e-mail, you are hereby
>         notified
>         >         that any
>         >         > dissemination, distribution or copying of this
>         information,
>         >         and any
>         >         > attachments thereto, is strictly prohibited. If
>         you have
>         >         received this
>         >         > e-mail in error, please immediately notify the
>         sender and
>         >         permanently
>         >         > delete the original and any copy of any e-mail and
>         any
>         >         printout
>         >         > thereof. Electronic transmissions cannot be
>         guaranteed to be
>         >         secure or
>         >         > error-free. The sender therefore does not accept
>         liability
>         >         for any
>         >         > errors or omissions in the contents of this
>         message which
>         >         arise as a
>         >         > result of e-mail transmission. Simplex Trading,
>         LLC and its
>         >         affiliates
>         >         > reserves the right to intercept, monitor, and
>         retain
>         >         electronic
>         >         > communications to and from its system as permitted
>         by law.
>         >         Simplex
>         >         > Trading, LLC is a registered Broker Dealer with
>         CBOE and a
>         >         Member of
>         >         > SIPC.
>         >         > _______________________________________________
>         >         > Freeipmi-devel mailing list
>         >         > address@hidden
>         >         >
>         https://lists.gnu.org/mailman/listinfo/freeipmi-devel
>         >         --
>         >         Albert Chu
>         >         address@hidden
>         >         Computer Scientist
>         >         High Performance Systems Division
>         >         Lawrence Livermore National Laboratory
>         >
>         >
>         >
>         >
>         >
>         > DISCLAIMER: NOTICE REGARDING PRIVACY AND CONFIDENTIALITY
>         >
>         > The information contained in and/or accompanying this
>         communication is
>         > intended only for use by the addressee(s) named herein and
>         may contain
>         > legally privileged and/or confidential information. If you
>         are not the
>         > intended recipient of this e-mail, you are hereby notified
>         that any
>         > dissemination, distribution or copying of this information,
>         and any
>         > attachments thereto, is strictly prohibited. If you have
>         received this
>         > e-mail in error, please immediately notify the sender and
>         permanently
>         > delete the original and any copy of any e-mail and any
>         printout
>         > thereof. Electronic transmissions cannot be guaranteed to be
>         secure or
>         > error-free. The sender therefore does not accept liability
>         for any
>         > errors or omissions in the contents of this message which
>         arise as a
>         > result of e-mail transmission. Simplex Trading, LLC and its
>         affiliates
>         > reserves the right to intercept, monitor, and retain
>         electronic
>         > communications to and from its system as permitted by law.
>         Simplex
>         > Trading, LLC is a registered Broker Dealer with CBOE and a
>         Member of
>         > SIPC.
>         --
>         Albert Chu
>         address@hidden
>         Computer Scientist
>         High Performance Systems Division
>         Lawrence Livermore National Laboratory
>         
>         
> 
> DISCLAIMER: NOTICE REGARDING PRIVACY AND CONFIDENTIALITY 
> 
> The information contained in and/or accompanying this communication is
> intended only for use by the addressee(s) named herein and may contain
> legally privileged and/or confidential information. If you are not the
> intended recipient of this e-mail, you are hereby notified that any
> dissemination, distribution or copying of this information, and any
> attachments thereto, is strictly prohibited. If you have received this
> e-mail in error, please immediately notify the sender and permanently
> delete the original and any copy of any e-mail and any printout
> thereof. Electronic transmissions cannot be guaranteed to be secure or
> error-free. The sender therefore does not accept liability for any
> errors or omissions in the contents of this message which arise as a
> result of e-mail transmission. Simplex Trading, LLC and its affiliates
> reserves the right to intercept, monitor, and retain electronic
> communications to and from its system as permitted by law. Simplex
> Trading, LLC is a registered Broker Dealer with CBOE and a Member of
> SIPC.
-- 
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory