[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Dvdrtools-users] NEC 2500-A
|
From: |
Jinghua Liu |
|
Subject: |
Re: [Dvdrtools-users] NEC 2500-A |
|
Date: |
Wed, 7 Apr 2004 09:58:11 -0500 (CDT) |
You need the "-dao" option in the command line.
On Tue, 6 Apr 2004, Justin T Wetherell wrote:
> *I am trying to burn an image file to a DVD, this is the error I get. I
> can burn to a CD with the same device. I don't know if the dvdrecord
> recognizes it correctly. At first it told me the file was too big,
> looked like it thinks my DVD-RW is a CD-RW.*
>
> /"dvdrecord speed=4 dev=0,0,0 /opt/media/audio/image.img"/
> dvdrtools v0.1.3
> Portions (c) 2002 Red Hat, Inc.
> Based on:
> Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.25
> Using libscg version 'schily-0.5'
> dvdrecord: Warning: using inofficial libscg transport code version
> (schily-RH-scsi-linux-sg.c-1.69-RH-O_EXCL '@(#)scsi-linux-sg.c 1.69
> 02/01/18 Copyright 1997 J. Schilling').
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : '_NEC '
> Identifikation : 'DVD_RW ND-2500A '
> Revision : '1.06'
> Device seems to be: Generic mmc2 DVD.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO BURNFREE
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> dvdrecord: WARNING: Data may not fit on current disk.
> dvdrecord: Notice: Most recorders cannot write CD's >= 90 minutes.
> dvdrecord: Notice: Use -ignsize option to allow >= 90 minutes.
> dvdrecord: Notice: Use -overburn option to write more than the official
> disk capacity.
> dvdrecord: Notice: Most CD-writers do overburning only on DAO mode.
>
>
> *I then set the -overburn flag*
>
> /"dvdrecord speed=4 -overburn dev=0,0,0 image.img"/
>
> dvdrtools v0.1.3
> Portions (c) 2002 Red Hat, Inc.
> Based on:
> Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.25
> Using libscg version 'schily-0.5'
> dvdrecord: Warning: using inofficial libscg transport code version
> (schily-RH-scsi-linux-sg.c-1.69-RH-O_EXCL '@(#)scsi-linux-sg.c 1.69
> 02/01/18 Copyright 1997 J. Schilling').
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : '_NEC '
> Identifikation : 'DVD_RW ND-2500A '
> Revision : '1.06'
> Device seems to be: Generic mmc2 DVD.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO BURNFREE
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> dvdrecord: WARNING: Data may not fit on current disk.
> dvdrecord: Notice: Most recorders cannot write CD's >= 90 minutes.
> dvdrecord: Notice: Use -ignsize option to allow >= 90 minutes.
> dvdrecord: Notice: Overburning active. Trying to write more than the
> official disk capacity.
> Starting to write CD/DVD at speed 4 in write mode for single session.
> Last chance to quit, starting real write in 0 seconds. Operation starts.
> Track 01: Total bytes read/written: 4311220224/4311220224 (2105088
> sectors).
> dvdrecord: Input/output error. close track/session: scsi sendcmd: no error
> CDB: 5B 00 02 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 03 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x72 Qual 0x03 (session fixation error - incomplete track in
> session) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.000s timeout 480s
> cmd finished after 0.000s timeout 480s
>
> *I finally got it to work, kinda.... Now it seemed to burn well but I
> cant mount the disc*
>
> dvdrecord -vv -eject -dao -dummy -overburn dev=0,0,0
> /opt/media/movies/Willy_Wonka_and_the_Chocolate_Factory.avi
> dvdrtools v0.1.3
> Portions (c) 2002 Red Hat, Inc.
> Based on:
> Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.25
> Using libscg version 'schily-0.5'
> Using libscg transport code version
> 'schily-RH-scsi-linux-sg.c-1.69-RH-O_EXCL'
> dvdrecord: Warning: using inofficial libscg transport code version
> (schily-RH-scsi-linux-sg.c-1.69-RH-O_EXCL '@(#)scsi-linux-sg.c 1.69
> 02/01/18 Copyright 1997 J. Schilling').
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : '_NEC '
> Identifikation : 'DVD_RW ND-2500A '
> Revision : '1.06'
> Device seems to be: Generic mmc2 DVD.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO BURNFREE
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> Drive buf size : 1769472 = 1728 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data 694 MB
> track: 1 start: 0 pregap: 150
> Total size: 797 MB (79:01.48) = 355611 sectors
> Lout start: 797 MB (79:03/36) = 355611 sectors
> 41 00 00 14 00 00 00 00
> 41 01 00 10 00 00 00 00
> 41 01 01 10 00 00 02 00
> 41 AA 01 14 00 4F 03 24
> Track 1 start 0
> Track 2 start 355611
> 41 00 A0 00 00 00 00 01 00 00 00 00
> 41 00 A1 00 00 00 00 01 00 00 00 00
> 41 00 A2 00 00 00 00 79 03 36 00 00
> 41 00 01 00 00 00 00 00 02 00 00 00
> Current Secsize: 2048
> ATIP start of lead in: -150 (00:00/00)
> ATIP start of lead out: 157789 (35:05/64)
> Disk type: unknown
> Manuf. index: -1
> Manufacturer: unknown (not in table)
> Blocks total: 157789 Blocks current: 157789 Blocks remaining: -197822
> dvdrecord: WARNING: Data may not fit on current disk.
> dvdrecord: Notice: Overburning active. Trying to write more than the
> official disk capacity.
> Starting to write CD/DVD at speed 4 in dummy mode for single session.
> Last chance to quit, starting dummy write in 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> BURN-Free is ON.
> Sending CUE sheet...
> 41 00 00 14 00 00 00 00
> 41 01 00 10 00 00 00 00
> 41 01 01 10 00 00 02 00
> 41 AA 01 14 00 4F 03 24
> dvdrecord: WARNING: Drive returns wrong startsec (0) using -150
> Writing pregap for track 1 at -150
> dvdrecord: Input/output error. write_g1: scsi sendcmd: no error
> CDB: 2A 00 FF FF FF 6A 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.000s timeout 200s
> write track pad data: error after 0 bytes
> BFree: 0 K BSize: 1728 K
> Starting new track at sector: 0
> Track 01: 694 of 694 MB written (fifo 100%).
> Track 01: Total bytes read/written: 728291328/728291328 (355611 sectors).
> Writing time: 221.752s
> Fixating...
> WARNING: Some drives don't like fixation in dummy mode.
> Fixating time: 0.496s
> dvdrecord: fifo had 11472 puts and 11472 gets.
> dvdrecord: fifo was 0 times empty and 7003 times full, min fill was 90%.
>
> *Anyone have any suggestions?*
>
>
>
> _______________________________________________
> Dvdrtools-users mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
>