[Dvdrtools-users] NEC 2500-A

[Justin T Wetherell]

*I am trying to burn an image file to a DVD, this is the error I get. I 
can burn to a CD with the same device. I don't know if the dvdrecord 
recognizes it correctly. At first it told me the file was too big, 
looked like it thinks my DVD-RW is a CD-RW.*

/"dvdrecord speed=4 dev=0,0,0 /opt/media/audio/image.img"/
dvdrtools v0.1.3
Portions (c) 2002 Red Hat, Inc.
Based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.5'
dvdrecord: Warning: using inofficial libscg transport code version 
(schily-RH-scsi-linux-sg.c-1.69-RH-O_EXCL '@(#)scsi-linux-sg.c     1.69 
02/01/18 Copyright 1997 J. Schilling').
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : '_NEC    '
Identifikation : 'DVD_RW ND-2500A '
Revision       : '1.06'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
dvdrecord: WARNING: Data may not fit on current disk.
dvdrecord: Notice: Most recorders cannot write CD's >= 90 minutes.
dvdrecord: Notice: Use -ignsize option to allow >= 90 minutes.
dvdrecord: Notice: Use -overburn option to write more than the official 
disk capacity.
dvdrecord: Notice: Most CD-writers do overburning only on DAO mode.


*I then set the -overburn flag*

/"dvdrecord speed=4 -overburn dev=0,0,0 image.img"/

dvdrtools v0.1.3
Portions (c) 2002 Red Hat, Inc.
Based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.5'
dvdrecord: Warning: using inofficial libscg transport code version 
(schily-RH-scsi-linux-sg.c-1.69-RH-O_EXCL '@(#)scsi-linux-sg.c 1.69 
02/01/18 Copyright 1997 J. Schilling').
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-2500A '
Revision : '1.06'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
dvdrecord: WARNING: Data may not fit on current disk.
dvdrecord: Notice: Most recorders cannot write CD's >= 90 minutes.
dvdrecord: Notice: Use -ignsize option to allow >= 90 minutes.
dvdrecord: Notice: Overburning active. Trying to write more than the 
official disk capacity.
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Track 01: Total bytes read/written: 4311220224/4311220224 (2105088 
sectors).
dvdrecord: Input/output error. close track/session: scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 03 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x72 Qual 0x03 (session fixation error - incomplete track in 
session) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 480s
cmd finished after 0.000s timeout 480s

*I finally got it to work, kinda.... Now it seemed to burn well but I 
cant mount the disc*

dvdrecord -vv -eject -dao -dummy -overburn dev=0,0,0 
/opt/media/movies/Willy_Wonka_and_the_Chocolate_Factory.avi
dvdrtools v0.1.3
Portions (c) 2002 Red Hat, Inc.
Based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.5'
Using libscg transport code version 
'schily-RH-scsi-linux-sg.c-1.69-RH-O_EXCL'
dvdrecord: Warning: using inofficial libscg transport code version 
(schily-RH-scsi-linux-sg.c-1.69-RH-O_EXCL '@(#)scsi-linux-sg.c     1.69 
02/01/18 Copyright 1997 J. Schilling').
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : '_NEC    '
Identifikation : 'DVD_RW ND-2500A '
Revision       : '1.06'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1769472 = 1728 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  694 MB
track: 1 start: 0 pregap: 150
Total size:     797 MB (79:01.48) = 355611 sectors
Lout start:     797 MB (79:03/36) = 355611 sectors
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 AA 01 14 00 4F 03 24
Track 1 start 0
Track 2 start 355611
41 00 A0 00 00 00 00 01 00 00 00 00
41 00 A1 00 00 00 00 01 00 00 00 00
41 00 A2 00 00 00 00 79 03 36 00 00
41 00 01 00 00 00 00 00 02 00 00 00
Current Secsize: 2048
ATIP start of lead in:  -150 (00:00/00)
ATIP start of lead out: 157789 (35:05/64)
Disk type:    unknown
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 157789 Blocks current: 157789 Blocks remaining: -197822
dvdrecord: WARNING: Data may not fit on current disk.
dvdrecord: Notice: Overburning active. Trying to write more than the 
official disk capacity.
Starting to write CD/DVD at speed 4 in dummy mode for single session.
Last chance to quit, starting dummy write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Sending CUE sheet...
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 AA 01 14 00 4F 03 24
dvdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
dvdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 200s
write track pad data: error after 0 bytes
BFree: 0 K BSize: 1728 K
Starting new track at sector: 0
Track 01: 694 of 694 MB written (fifo 100%).
Track 01: Total bytes read/written: 728291328/728291328 (355611 sectors).
Writing  time:  221.752s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:    0.496s
dvdrecord: fifo had 11472 puts and 11472 gets.
dvdrecord: fifo was 0 times empty and 7003 times full, min fill was 90%.

*Anyone have any suggestions?*