Re: LimeSDR USB parameter help

[Christophe Seguinot]

I finally get gr-limesdr working under GNURadio 3..8 (with LimeSDR Mini 
as a receiver) .  See flowgraph and .grc file here: 
https://github.com/myriadrf/gr-limesdr/issues/55

In the meantime, I used LimeSuiteGui to calibrate the LimeSDR Mini 
receiver. Don't know if that step was requested, but it now works!

Regards

On 28/01/2020 09:45, Andrew Back wrote:
> On 27/01/2020 21:37, Christophe Seguinot wrote:
> > Do not account for my previous mail. I switched from 3.9 to 3.8, builded
> > from source because I'm testing and developing code, but some older
> > gnuradio python code where in/usr/local/lib/python3, whilst some newer
> > under /usr/local/lib/python3.6 and an incorrect PYTHONPATH.
> >
> > I now can say that I was able to run a code with the gr-limesdr sink
> > block found on the gr3.8 branch of
> > https://github.com/myriadrf/gr-limesdr.git, however at present I only
> > get noise as Arm said. (I'm using a "LimeSDR-Mini")
> >
> > I will try compiling and using gr-osmosdr under GR3.8
> See also this discussion on the issue tracker with comments concerning
> the gr-3.8 branch:
>
>    https://github.com/myriadrf/gr-limesdr/issues/55
>
> Regards,
>
> Andrew