[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: LimeSDR USB parameter help
From: |
Andrew Back |
Subject: |
Re: LimeSDR USB parameter help |
Date: |
Tue, 28 Jan 2020 08:45:50 +0000 |
On 27/01/2020 21:37, Christophe Seguinot wrote:
> Do not account for my previous mail. I switched from 3.9 to 3.8, builded
> from source because I'm testing and developing code, but some older
> gnuradio python code where in/usr/local/lib/python3, whilst some newer
> under /usr/local/lib/python3.6 and an incorrect PYTHONPATH.
>
> I now can say that I was able to run a code with the gr-limesdr sink
> block found on the gr3.8 branch of
> https://github.com/myriadrf/gr-limesdr.git, however at present I only
> get noise as Arm said. (I'm using a "LimeSDR-Mini")
>
> I will try compiling and using gr-osmosdr under GR3.8
See also this discussion on the issue tracker with comments concerning
the gr-3.8 branch:
https://github.com/myriadrf/gr-limesdr/issues/55
Regards,
Andrew
- LimeSDR USB parameter help, Barry Duggan, 2020/01/24
- Re: LimeSDR USB parameter help, Amr Bekhit, 2020/01/24
- Re: LimeSDR USB parameter help, Barry Duggan, 2020/01/24
- Re: LimeSDR USB parameter help, Barry Duggan, 2020/01/26
- Re: LimeSDR USB parameter help, Amr Bekhit, 2020/01/27
- Re: LimeSDR USB parameter help, Christophe Seguinot, 2020/01/27
- Re: LimeSDR USB parameter help, Christophe Seguinot, 2020/01/27
- Re: LimeSDR USB parameter help,
Andrew Back <=
- Re: LimeSDR USB parameter help, Christophe Seguinot, 2020/01/28
- Re: LimeSDR USB parameter help, Andrew Back, 2020/01/28
- How to use SDR Hardware in GNURadio 3.8, Christophe Seguinot, 2020/01/28