Re: Recommendation for high sample rate receiver?

[Marcus Müller]

Seconding what Brian says:
Math says *any* signal up to a bandwidth of 6 MHz can be represented by
6 MS/s. So, either, your signal isn't that bandlimited, or you forgot
to tell us an important requirement (or you might have your math
wrong).

Best regards,
Marcus

On Sun, 2020-01-26 at 14:13 -0500, Brian Padalino wrote:
> On Sun, Jan 26, 2020 at 1:20 PM Mike <address@hidden> wrote:
> > Hello,
> > 
> > I am hoping someone on the list could suggest a device that
> > receives in
> > lower L-band (1.0 to 1.6 GHz) and can cover 6 MHz (+/- 3 MHz around
> > center) at (and here's the trick) 500 MS/second with at least 8
> > bits of
> > resolution.  I'm looking for 2 ns baseband samples from multiple
> > receivers to perform trilateration.
> 
> Interesting conflicting requirements with the baseband bandwidth of
> 6MHz but 500MSPS ADC.
> 
> Are you sure you don't need a much wider baseband bandwidth as well?
> 
> Brian