Re: [Bayonne-devel] My TGI/Perl works BUT...

[Michel Think]

Sorry, I forgot to tell you what I did :-p

I changed  "  tgi=perl " to ";tgi=perl" . 
This raise me some new questions : why did It work before with bayonne
1.2.12 and not now with  1.2.13?  When ";tgi=perl" (in comment)  what
is the default values for tgi interpreters?

bye



On 4/19/05, Michel Think <address@hidden> wrote:
> SORRYYY for disturbing you!! I am an idiot :-P
> I upgraded my bayonne server but I didnt pay attention about my
> configuration file... now it works fine!!
> 
> Thanks you!!
> 
> On 4/19/05, Michel Think <address@hidden> wrote:
> > Thank you  for your (very ;-)) fast reply!!
> >
> > As you told me, I do ' print "SET&0&result&200\n" ' directly in my tgi app.
> > For the first call, (as you told me before) it prints
> > "SET&0&result&200" two times and I get the expected result. But, for
> > the following calls, the ' print "SET&0&result&200\n" '  doesnt print
> > and it behaves like before (empty result).
> >
> > Here are the traces :
> >
> > First call:
> > ---
> > tgi: cmd=mytgi.pl query=v1=10&v2=20 digits= clid=UNKNOWN dnid=UNKNOWN
> > fifo: cmd=SET&0&result&200
> > fifo: cmd=SET&0&result&200
> > fifo: cmd=wait 0 6044
> > fifo: cmd=exit 0 0
> > dummy(0): Result = 200
> > --
> > Second call :
> > ---
> > tgi: cmd=mytgi.pl query=v1=10&v2=20 digits= clid=UNKNOWN dnid=UNKNOWN
> > fifo: cmd=wait 0 6046
> > fifo: cmd=exit 0 0
> > dummy(0): Result =
> >
> > any ideas? ;-)
> >
> > thanks a lot!
> >
> > On 4/19/05, David Sugar <address@hidden> wrote:
> > > -----BEGIN PGP SIGNED MESSAGE-----
> > > Hash: SHA1
> > >
> > > Hmm...normally stdout points to the fifo when your perl app runs, so the
> > > set command really just expands into a perl "print" statment.  What
> > > happens if you do a print "SET&0&result&200\n" directly in your tgi app?
> > >
> > > Michel Think wrote:
> > > > Hi everyone,
> > > >
> > > > My Bayonne server version is 1.2.13. I work with soundcard for the 
> > > > moment.
> > > >
> > > > In my script, I make a TGI call to a perl script :
> > > >
> > > > ---------------
> > > > set %v1 10
> > > > set %v2 20
> > > > libexec 30 mytgi.pl %v1 %v2
> > > >
> > > > slog "Result = " %result
> > > >
> > > > hangup
> > > > exit
> > > > -----------
> > > >
> > > >
> > > > In mytgi.pl, I make a multiplication between %v1 and %v2 :
> > > >
> > > > -----------
> > > > #!/usr/bin/perl
> > > >
> > > > use lib '/usr/local/libexec/bayonne/';
> > > > use TGI;
> > > >
> > > > $a = $TGI::QUERY{'v1'};
> > > >
> > > > $b = $TGI::QUERY{'v2'};
> > > >
> > > > $res = $a * $b;
> > > >
> > > > TGI::set("result",$res);
> > > >
> > > > exit
> > > > ---------------
> > > >
> > > > When I start my bayonne server, it only works fine for the first
> > > > (phone)call! After
> > > > the first call, "result" is empty! Here are some traces:
> > > >
> > > > --------------------
> > > > First call:
> > > >
> > > > tgi: cmd=mytgi.pl query=v1=10&v2=20 digits= clid=UNKNOWN dnid=UNKNOWN
> > > > fifo: cmd=SET&0&result&200
> > > > fifo: cmd=wait 0 5621
> > > > fifo: cmd=exit 0 0
> > > > dummy(0): Result = 200
> > > >
> > > > Second Call:
> > > >
> > > > dummy0: step/start...
> > > > tgi: cmd=mytgi.pl query=v1=10&v2=20 digits= clid=UNKNOWN dnid=UNKNOWN
> > > > fifo: cmd=wait 0 5623
> > > > fifo: cmd=exit 0 0
> > > > dummy(0): Result= :
> > > >
> > > > --------------
> > > >
> > > >>From the trace above, it seems that in the second call, "TGI::set" 
> > > >>doesn't
> > > > work...why?
> > > >
> > > > However, if I hang up (restart or stop/start) the bayonne server 
> > > > process, It
> > > > will work again for the first call and not for the following calls...
> > > >
> > > > Besides, I noticed that if I made two different TGI calls the second TGI
> > > > call wouldn't work even though it is another perl script)
> > > >
> > > > (for example :
> > > > ...
> > > > libexec 30 mytgi.pl %v1 %v2
> > > > slog ....
> > > > libexec 30 ttggii.pl %v3 %v4
> > > > ...)
> > > >
> > > > My questions are simple ;-) :
> > > >
> > > > What am I doing wrong? what should I correct in my
> > > > scripts? and Why?
> > > >
> > > >
> > > > Thanks you !
> > > >
> > > >
> > > > (Ps: I did the same kind of script with bayonne 1.2.12 and it worked...)
> > > >
> > > >
> > > > _______________________________________________
> > > > Bayonne-devel mailing list
> > > > address@hidden
> > > > http://lists.gnu.org/mailman/listinfo/bayonne-devel
> > > >
> > > -----BEGIN PGP SIGNATURE-----
> > > Version: GnuPG v1.4.1 (GNU/Linux)
> > > Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
> > >
> > > iD8DBQFCZQv+JlWtSTiTVsYRAjCgAKCkItraKEEcPZ5xiw3E9SNgl6JtwQCdHBhP
> > > ahzYIiRIUf8P5bxQVfuDCPk=
> > > =MlqW
> > > -----END PGP SIGNATURE-----
> > >
> > >
> > >
> >
>