Re: [Bayonne-devel] My TGI/Perl works BUT...

[Michel Think]

Thank you  for your (very ;-)) fast reply!!

As you told me, I do ' print "SET&0&result&200\n" ' directly in my tgi app. 
For the first call, (as you told me before) it prints
"SET&0&result&200" two times and I get the expected result. But, for
the following calls, the ' print "SET&0&result&200\n" '  doesnt print
and it behaves like before (empty result).

Here are the traces :

First call:
---
tgi: cmd=mytgi.pl query=v1=10&v2=20 digits= clid=UNKNOWN dnid=UNKNOWN
fifo: cmd=SET&0&result&200
fifo: cmd=SET&0&result&200
fifo: cmd=wait 0 6044
fifo: cmd=exit 0 0
dummy(0): Result = 200
--
Second call :
---
tgi: cmd=mytgi.pl query=v1=10&v2=20 digits= clid=UNKNOWN dnid=UNKNOWN
fifo: cmd=wait 0 6046
fifo: cmd=exit 0 0
dummy(0): Result =

any ideas? ;-)

thanks a lot!

On 4/19/05, David Sugar <address@hidden> wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> Hmm...normally stdout points to the fifo when your perl app runs, so the
> set command really just expands into a perl "print" statment.  What
> happens if you do a print "SET&0&result&200\n" directly in your tgi app?
> 
> Michel Think wrote:
> > Hi everyone,
> >
> > My Bayonne server version is 1.2.13. I work with soundcard for the moment.
> >
> > In my script, I make a TGI call to a perl script :
> >
> > ---------------
> > set %v1 10
> > set %v2 20
> > libexec 30 mytgi.pl %v1 %v2
> >
> > slog "Result = " %result
> >
> > hangup
> > exit
> > -----------
> >
> >
> > In mytgi.pl, I make a multiplication between %v1 and %v2 :
> >
> > -----------
> > #!/usr/bin/perl
> >
> > use lib '/usr/local/libexec/bayonne/';
> > use TGI;
> >
> > $a = $TGI::QUERY{'v1'};
> >
> > $b = $TGI::QUERY{'v2'};
> >
> > $res = $a * $b;
> >
> > TGI::set("result",$res);
> >
> > exit
> > ---------------
> >
> > When I start my bayonne server, it only works fine for the first
> > (phone)call! After
> > the first call, "result" is empty! Here are some traces:
> >
> > --------------------
> > First call:
> >
> > tgi: cmd=mytgi.pl query=v1=10&v2=20 digits= clid=UNKNOWN dnid=UNKNOWN
> > fifo: cmd=SET&0&result&200
> > fifo: cmd=wait 0 5621
> > fifo: cmd=exit 0 0
> > dummy(0): Result = 200
> >
> > Second Call:
> >
> > dummy0: step/start...
> > tgi: cmd=mytgi.pl query=v1=10&v2=20 digits= clid=UNKNOWN dnid=UNKNOWN
> > fifo: cmd=wait 0 5623
> > fifo: cmd=exit 0 0
> > dummy(0): Result= :
> >
> > --------------
> >
> >>From the trace above, it seems that in the second call, "TGI::set" doesn't
> > work...why?
> >
> > However, if I hang up (restart or stop/start) the bayonne server process, It
> > will work again for the first call and not for the following calls...
> >
> > Besides, I noticed that if I made two different TGI calls the second TGI
> > call wouldn't work even though it is another perl script)
> >
> > (for example :
> > ...
> > libexec 30 mytgi.pl %v1 %v2
> > slog ....
> > libexec 30 ttggii.pl %v3 %v4
> > ...)
> >
> > My questions are simple ;-) :
> >
> > What am I doing wrong? what should I correct in my
> > scripts? and Why?
> >
> >
> > Thanks you !
> >
> >
> > (Ps: I did the same kind of script with bayonne 1.2.12 and it worked...)
> >
> >
> > _______________________________________________
> > Bayonne-devel mailing list
> > address@hidden
> > http://lists.gnu.org/mailman/listinfo/bayonne-devel
> >
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.1 (GNU/Linux)
> Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
> 
> iD8DBQFCZQv+JlWtSTiTVsYRAjCgAKCkItraKEEcPZ5xiw3E9SNgl6JtwQCdHBhP
> ahzYIiRIUf8P5bxQVfuDCPk=
> =MlqW
> -----END PGP SIGNATURE-----
> 
> 
>