[Bayonne-devel] E1 CTR4 Prompt / Time slot problem

[Julien Chavanton]

I am having strange problem on a server I have set in London.

 

Sometime the Bayonne is playing a prompt and I do not hear it on the line.

I do not think it is an SCSA routing problem because we would have noticed such problem before, but I am not completely sure.

I have activated some debugging and apparently everything looks fine.

I have tried Dialogic & Globalcall drivers, same behavior.

 

I think this can be caused by the Telco switch “time slot connection” because sometime I hear a prompt that is not on my server, the D channel is always

Receiving and sending information correctly.

 

This is hard to debug, so I would just like to have feed-back from people using Bayonne on E1 ctr4 to see if everything is fine for them.

 

Is there a test application I could use that would play prompt on E1 ISDN so I can be sure Bayonne is not the source of the problem?

 

Julien

 

 

I have 2x  DIALOGIC D/600 JCT 2E1 120

 

Configured as follow:

 

[Genload - All Boards]

LogFile=genload.log

BLTAddress = D8000

Dialog/HD=YES

BusType=SCBus

SCBusClockMaster=AUTOMATIC

SCBusClockMasterSource=AUTOMATIC

PCMEncoding=ALAW

ISABusWidth=16-BIT

 

[Genload - ID 2] /* DCB/xxxSC */

 

[Genload - PCI ID 0] /* Dual T1/E1 PCI HD */

ParameterFile=ctr4.prm

ParameterFile2=ctr4.prm

ISDNProtocol=ctr4

ISDNProtocol2=ctr4

 

[Genload - PCI ID 1] /* Dual T1/E1 PCI HD */

ParameterFile=ctr4.prm

ParameterFile2=ctr4.prm

ISDNProtocol=ctr4

ISDNProtocol2=ctr4