RE: [avrdude-dev] ERE EMBMega32 board and avrdude.conf

[Rune Christensen]

> -----Original Message-----
> From: 
> address@hidden 
> [mailto:address@hidden
> u.org] On Behalf Of Nathan Smith
> Sent: Saturday, January 15, 2005 12:43 AM
> To: Joerg Wunsch
> Cc: avrdude-dev
> Subject: Re: [avrdude-dev] ERE EMBMega32 board and avrdude.conf
> 
> 
> Joerg Wunsch wrote:
> 
> >As Nathan Smith wrote:
> >
> >  
> >
> >>yep, both good ideas and not lost on me but -v didn't tell 
> me anything 
> >>interesting and I don't have a 'scope :(
> >>    
> >>
> >
> >That's why I wrote avrdude -vvvv -- the more `v's you use, the more 
> >verbosity.
> >
> >Then, post the results.
> >
> >Btw., simple (used) scopes are almost for free these days.  Always a 
> >useful investment for someone working with microcontrollers.
> >
> >  
> >
> Ok, using -vvvv gives the following output: (warning, this is 
> very very 
> long to fit in an email )
> 
> 
> C:\WinAVR\projects\Mega32_first>avrdude -p atmega32 -P lpt1 -c 
> ere-avrisp -vvvv
> -U flash:w:first.hex
> 
> avrdude: Version 4.3.0
>          Copyright (c) 2000-2003 Brian Dean, address@hidden
> 
>          Experimental Windows32 native build by Martin Thomas
> 
>          System wide configuration file is 
> "C:\WinAVR\bin\avrdude.conf"
> 
>          Using Port            : lpt1
>          Using Programmer      : ere-avrisp
>          AVR Part              : ATMEGA32
>          Chip Erase delay      : 9000 us
>          PAGEL                 : PD7
>          BS2                   : PA0
>          RESET disposition     : dedicated
>          RETRY pulse           : SCK
>          serial program mode   : yes
>          parallel program mode : yes
>          Memory Detail         :
...
...
> 
>          Programmer Type : PPI
>          Description     : ERE AVR ISP
>            VCC     = 0x00 (not used)
>            BUFF    = 0x00 (not used)
>            RESET   = 4
>            SCK     = 3
>            MOSI    = 2
>            MISO    = 10
>            ERR LED = 0
>            RDY LED = 0
>            PGM LED = 0
>            VFY LED = 0
> 
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> par_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
> avrdude: AVR device not responding
> avrdude: initialization failed, rc=-1
>          Double check connections and try again, or use -F to override
>          this check.
> 
> 
> avrdude done.  Thank you.
> 
> 
> C:\WinAVR\projects\Mega32_first>
> 
> 
> 
> -- 
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 265.6.11 - Release Date: 12/01/2005
> 
> 
> 
> _______________________________________________
> avrdude-dev mailing list
> address@hidden 
> http://lists.nongnu.org/mailman/listinfo/avrdude-dev
> 

It looks like a missing connection. Try to test the programmer: First
connect miso and mosi. Then connect the programmer to the PC and run avrdude
again then it should say 
[AC 53 00 00] [AC 53 00 00] 
Because you just loop back the data.

Try this and report back.

Are you sure that you didn't connect the programmer in a wrong way to the
mega32 board.

/Rune
---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 0503-0, 18-01-2005
Tested on: 18-01-2005 15:59:13
avast! - copyright (c) 1988-2004 ALWIL Software.
http://www.avast.com