[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] ATtiny2313 and pony-stk200 problems?
From: |
Bob Paddock |
Subject: |
Re: [avrdude-dev] ATtiny2313 and pony-stk200 problems? |
Date: |
Fri, 25 Jun 2004 12:12:47 -0400 |
User-agent: |
Opera M2/7.51 (Win32, build 3798) |
get the t2313 to work with pony-stk200 parallel port hardware.
How is it not working?
Sorry.
When reading the signature byte I usually get
odd signatures like this:
0x1e7f22
0x003d00
0x000102 (the most common, Atmel indicates this means the
device has been secured; it has not)
When trying to program the device always fails verification.
----
avrdude.exe: verifying ...
avrdude.exe: verification error, first mismatch at byte 0x0000
0xbe != 0x00
avrdude.exe: verification error; content mismatch
----
This is typical output from this command line
avrdude -v -p t2313 -c pony-stk200 -Plpt1 -U flash:w:light.hex :
avrdude.exe: Version 4.3.0
Copyright (c) 2000-2003 Brian Dean, address@hidden
Experimental Windows32 native build by Martin Thomas
System wide configuration file is "C:\WinAVR\bin\avrdude.conf"
Using Port : lpt1
Using Programmer : pony-stk200
AVR Part : ATtiny2313
Chip Erase delay : 9000 us
PAGEL : PD4
BS2 : PD6
RESET disposition : possible i/o
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Memory Detail :
Page Polled
Memory Type Paged Size Size #Pages MinW MaxW ReadBack
----------- ------ ------ ---- ------ ----- ----- ---------
eeprom no 128 0 0 4000 4500 0xff 0xff
flash yes 2048 32 64 4000 4500 0xff 0xff
signature no 3 0 0 0 0 0x00 0x00
lock no 1 0 0 0 0 0x00 0x00
lfuse no 1 0 0 0 0 0x00 0x00
hfuse no 1 0 0 0 0 0x00 0x00
efuse no 1 0 0 0 0 0x00 0x00
calibration no 1 0 0 0 0 0x00 0x00
Programmer Type : PPI
Description : Pony Prog STK200
VCC = 0x00 (not used)
BUFF = 0x0c = pins 4,5
RESET = 9
SCK = 6
MOSI = 7
MISO = 10
ERR LED = 0
RDY LED = 0
PGM LED = 8
VFY LED = 0
avrdude.exe: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.01s
avrdude.exe: Device signature = 0x1e7f22
avrdude.exe: current erase-rewrite cycle count is 2139094655 (if being
tracked)
avrdude.exe done. Thank you.
The hardware works ok with PonyProg, but it does not support the t2313.
status of giveio:
Type: [0x01] Kernel driver.
Start Type: [0x02] Automatic
Error Control: [0x01] NORMAL: Display a message box.
Binary path: \??\C:\WINDOWS\giveio.sys
Load order grp:
Dependencies:
Start Name:
ok.
- [avrdude-dev] ATtiny2313 and pony-stk200 problems?, Bob Paddock, 2004/06/25
- Re: [avrdude-dev] ATtiny2313 and pony-stk200 problems?, E. Weddington, 2004/06/25
- Re: [avrdude-dev] ATtiny2313 and pony-stk200 problems?,
Bob Paddock <=
- Re: [avrdude-dev] ATtiny2313 and pony-stk200 problems?, Galen Seitz, 2004/06/25
- Re: [avrdude-dev] ATtiny2313 and pony-stk200 problems?, E. Weddington, 2004/06/25
- Re: [avrdude-dev] ATtiny2313 and pony-stk200 problems?, Bob Paddock, 2004/06/25
- Re: [avrdude-dev] ATtiny2313 and pony-stk200 problems?, Galen Seitz, 2004/06/25
- Re: [avrdude-dev] ATtiny2313 and pony-stk200 problems?, Jan-Hinnerk Reichert, 2004/06/27
- Re: [avrdude-dev] ATtiny2313 and pony-stk200 problems?, Bob Paddock, 2004/06/28
- Re: [avrdude-dev] ATtiny2313 and pony-stk200 problems?, Jan-Hinnerk Reichert, 2004/06/29