Re[2]: [avr-gcc-list] UISP and ATtiny15

[Theodore A. Roth]

On Mon, 19 Apr 2004, Alexander Popov wrote:

> Hello!
>
> Monday, April 19, 2004, 7:27:18 PM, Ted Roth wrote:
>
> TAR> Have you looked into this (from the data sheet)?
>
> TAR>   When the RSTDISBL Fuse is programmed  0 , the External Reset function
> TAR>   of pin PB5 is disabled(1). Default value is unprogrammed  1.
> TAR>   Programming this fuse while in the Low-voltage Serial Programming mode
> TAR>   will disable future In-System downloading attempts.
>
> Of course I know this and I avoid "One time-programming" of my
> processors. This is not the case, since '--dvoltage=3' fixes the
> problem and fiture programming is possible.

Just eliminating the obvious.

>
> Does someone have ATtiny15L to test if this is a common problem and if some
> fixing of UISP is required?

I have some 15L soic-8 parts and just found a soic-to-dip convertor. I
will need to hack up something that my stk200 can talk to...

---
Ted Roth
PGP Key ID: 0x18F846E9
Jabber ID: address@hidden