RE: problems with xlogmaster6 on hpux 10.20

[h . c . a . m . speel]

I am still searching and have now installed hettext from source. But it
still does not install any lXext anywhere. Is this a bug in the installer or
something?

hc


xlogmaster 1.6
gtk+ 1.2.10
hp-ux 10.20
x? from hp-ux


Hans-Cees Speel                    .-.
Platform ethernet OVN/OCN          /v\
tel 12423                         // \\
address@hidden            /(   )\ 
prive address@hidden       ^^-^^    
/www.hanscees.com                      
                                 


<-----Original Message-----
<From: address@hidden [mailto:address@hidden
<Sent: Thursday, November 29, 2001 3:29 PM
<To: address@hidden
<Subject: problems with xlogmaster6 on hpux 10.20
<
<
<Hello 
<
<I have problems with compiling x-logmaster 1.6 on hp ux 10.20.
<
<I have reveiwed all logviewers in freshmeat and xlogmaster is 
<by far the
<best. I want to use it to watch logfiles that fill up with snmp traps
<becuase it is better than the hp-openview logviewer. Because 
<it can filter
<far better. 
<
<However, our hp openview is on a hp-box , and there we get the 
<troubles..
<
<Before I ask my questions the following:
<
<Can there not be an xlogmaster binary with uncluded libraries?
<Who has installed it on hp-ux? Tips?
<That way you can run it in some compatibility software. That 
<would work on
<solaris at least. 
<Anyway..the hp story
<
<
<I have first installed 
<bin-utils; gettext; gcc; gmake
<and then libc-1.2.10
<gtk+ 1.2.10
<all with depot files from http://hpux.tn.tudelft.nl
<
<This all goes well. 
<
<I have put gtk-config in the PATH by making a link to 
<gtk-config which is
<actually in /opt/gtk/bin/
<
<However, when I run ./configure
<
<the thing gets lost with an error. 
<=========================
<
<nirvana:/home/hanscees/xlogmaster-1.6.0 # rm config.log
<nirvana:/home/hanscees/xlogmaster-1.6.0 #  ./configure
<loading cache ./config.cache
<checking for a BSD compatible install... ./install-sh -c
<checking whether build environment is sane... yes
<checking whether make sets ${MAKE}... (cached) yes
<checking for working aclocal... missing
<checking for working autoconf... missing
<checking for working automake... missing
<checking for working autoheader... missing
<checking for working makeinfo... missing
<checking for gcc... (cached) gcc
<checking whether the C compiler (gcc  ) works... yes
<checking whether the C compiler (gcc  ) is a cross-compiler... no
<checking whether we are using GNU C... (cached) yes
<checking whether gcc accepts -g... (cached) yes
<checking for c++... (cached) gcc
<checking whether the C++ compiler (gcc -O2 ) works... yes
<checking whether the C++ compiler (gcc -O2 ) is a cross-compiler... no
<checking whether we are using GNU C++... (cached) yes
<checking whether gcc accepts -g... (cached) yes
<checking for ranlib... (cached) ranlib
<checking host system type... hppa2.0-hp-hpux10.20
<checking whether build environment is sane... yes
<checking whether ln -s works... (cached) yes
<checking for gtk-config... (cached) /usr/bin/gtk-config
<checking for GTK - version >= 1.2.1... no
<*** Could not run GTK test program, checking why...
<*** The test program failed to compile or link. See the file 
<config.log for
<the
<*** exact error that occured. This usually means GTK was incorrectly
<installed
<*** or that you have moved GTK since it was installed. In the 
<latter case,
<you
<*** may want to edit the gtk-config script: /usr/bin/gtk-config
<configure: error: Cannot find GTK+: Is gtk-config in executable path ?
<================================================================
<
<Of course gtk-config is in the path and also I have not moved it. 
<
<The config.log says:
<==============================
<
<
<configure:1587: gcc -o conftest  -I/opt/gtk+/include/gtk-1.2
<-I/opt/glib/include -I/opt/glib/
<include/glib-1.2 -I/opt/glib/lib/glib/include -I/opt/gettext/include
<-I/usr/include/X11R6   c
<onftest.c  -L/opt/gtk+/lib -lgtk -lgdk -L/opt/glib/lib -Wl,-E -lgmodule
<-lglib -ldld -L/opt/g
<ettext/lib -lintl -lXext -lX11 -lm 1>&5
</usr/ccs/bin/ld: Can't find library for -lXext
<collect2: ld returned 1 exit status
<configure: failed program was:
<#line 1577 "configure"
<#include "confdefs.h"
<
<#include <gtk/gtk.h>
<#include <stdio.h>
<
<int main() {
< return ((gtk_major_version) || (gtk_minor_version) || 
<(gtk_micro_version));
<; return 0; }
<===========================
<so it seems it cannot find lXeext. This is correct because I 
<have found that
<gettext does install lintl but not lXexts. Don't know why?
<
<However, when I do ./configure --disable-gtktest
<I get no errors (surprise surprise). 
<Not until I do gmake that is :-)
<
<when I run gmake I get the following errors:
<=================================================
<gmake  all-recursive
<gmake[1]: Entering directory `/home/hanscees/xlogmaster-1.6.0'
<Making all in import
<gmake[2]: Entering directory `/home/hanscees/xlogmaster-1.6.0/import'
<Making all in vu
<gmake[3]: Entering directory 
<`/home/hanscees/xlogmaster-1.6.0/import/vu'
<gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I.. -c vustr.c
<In file included from vustr.c:23:
<vu.h:113:3: warning: pasting "access" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "chdir" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "chmode" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "chown" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "chroot" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "close" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "closedir" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "fchdir" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "fstat" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "fsync" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "ftruncate" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "link" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "lseek" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "lstat" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "mkdir" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "open" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "opendir" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "read" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "readdir" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "readlink" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "rename" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "rmdir" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "seekdir" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "stat" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "symlink" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "telldir" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "truncate" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "unlink" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "utimes" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "write" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "fcntl" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "ioctl" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "dup" and ";" does not give a valid
<preprocessing token
<vu.h:113:3: warning: pasting "dup2" and ";" does not give a valid
<preprocessing token
<vustr.c: In function `vustr_ftruncate':
<vustr.c:236: `EBADFD' undeclared (first use in this function)
<vustr.c:236: (Each undeclared identifier is reported only once
<vustr.c:236: for each function it appears in.)
<gmake[3]: *** [vustr.o] Error 1
<gmake[3]: Leaving directory `/home/hanscees/xlogmaster-1.6.0/import/vu'
<gmake[2]: *** [all-recursive] Error 1
<gmake[2]: Leaving directory `/home/hanscees/xlogmaster-1.6.0/import'
<gmake[1]: *** [all-recursive] Error 1
<gmake[1]: Leaving directory `/home/hanscees/xlogmaster-1.6.0'
<gmake: *** [all-recursive-am] Error 2
<
<-========================
<
<So any help out there on this very quiet list?
<
<hc
<
<
<
<
<
<
<
<
<
<
<
<the log says
<
<
<Hans-Cees Speel                    .-.
<Platform ethernet OVN/OCN          /v\
<tel 12423                         // \\
<address@hidden            /(   )\ 
<prive address@hidden       ^^-^^    
</www.hanscees.com                      
<                                 
<
<_______________________________________________
<Help-xlogmaster mailing list
<address@hidden
<http://mail.gnu.org/mailman/listinfo/help-xlogmaster
<