dvdrtools-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Dvdrtools-users] dvdrecord speed question


From: Kevin
Subject: [Dvdrtools-users] dvdrecord speed question
Date: Fri, 20 Dec 2002 03:40:29 -0500

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

A few days back i posted a question stating that i had
successfully recorded on 1x DVD-Rs at 2x speed.  I now
see that this is inaccurate.

While i was giving dvdrecord the "speed=2" command, i
failed to notice that was actually falling back to 1x
during the burn.  Does anyone here know why this is? 
My burner is supposed to support 4x and below.

Below is the output of dvdrecord:

thanks,
/KRM

bash-2.05a# dvdrecord -v speed=1 dev=/dev/sg1 -dao
/XFS/rb3.raw dvdrtools - based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C)
1995-2001 Jörg Schilling TOC Type: 1 = CD-ROM
scsidev: '/dev/sg1'
devname: '/dev/sg1'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.5'
atapi: 1
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   : 
Vendor_info    : 'PIONEER '
Identifikation : 'DVD-RW  DVR-105 '
Revision       : '1.00'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE 
Supported modes: PACKET SAO
Drive buf size : 1605632 = 1568 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  4469 MB        
Total size:     5132 MB (508:29.01) = 2288176 sectors
Lout start:     5132 MB (508:31/01) = 2288176 sectors
Current Secsize: 2048
  ATIP start of lead in:  -150 (00:00/00)
Disk type:    unknown
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks
remaining: 10320 Starting to write CD/DVD at speed 1 in
write mode for single session. Last chance to quit,
starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ...
input buffer ready. trackno=0
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
dvdrecord: WARNING: Drive returns wrong startsec (0)
using -150 Starting new track at sector: 0
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQE+Atd9bxVY1wVZZbYRAqmxAJ4kJodszhA/5ZJX/Qthxc8yNMJTVQCfcspy
Sb9OFum0HgPFOx/OnxiX2kU=
=Y/bz
-----END PGP SIGNATURE-----



reply via email to

[Prev in Thread] Current Thread [Next in Thread]