dvdrtools-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Dvdrtools-users] No success writing DVD-RW on Sony DRU500A


From: Heinrich Rebehn
Subject: Re: [Dvdrtools-users] No success writing DVD-RW on Sony DRU500A
Date: Tue, 10 Dec 2002 21:24:35 +0100
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.0.0) Gecko/20020529

Heinrich Rebehn wrote:
Hi list,

i installed dvdrtools today and tried to write my first DVD. However, i had no luck. dvdrecord aborted with error messages:

###########################################################################

# dvdrecord -v dev=1,0,0 speed=4 -dao dvd.img
dvdrtools - based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.5'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'SONY    '
Identifikation : 'DVD RW DRU-500A '
Revision       : '1.0c'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 4718592 = 4608 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  4101 MB
Total size:     4710 MB (466:38.29) = 2099872 sectors
Lout start:     4710 MB (466:40/22) = 2099872 sectors
Current Secsize: 2048
  ATIP start of lead in:  -150 (00:00/00)
Disk type:    unknown
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 198624
Starting to write CD/DVD at speed 1 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 2100038
Track 01: 0 of 4101 MB written.dvdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 20 0B 46 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 2C 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.005s timeout 200s

write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
Writing  time:   12.758s
Fixating...
Fixating time:    0.001s
dvdrecord: fifo had 64 puts and 1 gets.
dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

############################################################################

# uname -a
Linux borgfeld 2.4.18 #4 SMP Mon May 27 17:24:49 CEST 2002 i586 unknown

Searching the web for this yielded only posts describing similar problems, but i have not seen a solution.

Am i missing something? Can anybody help?



More info: I can burn CD-RWs with the drive just fine - using the same dvdrecord.

Heinrich




reply via email to

[Prev in Thread] Current Thread [Next in Thread]