[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-stable] [PATCH 5/7] curl: convert CURLAIOCB to byte values
From: |
Paolo Bonzini |
Subject: |
[Qemu-stable] [PATCH 5/7] curl: convert CURLAIOCB to byte values |
Date: |
Wed, 10 May 2017 16:32:03 +0200 |
This is in preparation for the conversion from bdrv_aio_readv to
bdrv_co_preadv, and it also requires changing some of the size_t values
to uint64_t. This was broken before for disks > 2TB, but now it would
break at 4GB.
Signed-off-by: Paolo Bonzini <address@hidden>
---
block/curl.c | 44 ++++++++++++++++++++++----------------------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/block/curl.c b/block/curl.c
index 4b4d5a2389..3e288f2bc7 100644
--- a/block/curl.c
+++ b/block/curl.c
@@ -96,8 +96,8 @@ typedef struct CURLAIOCB {
BlockAIOCB common;
QEMUIOVector *qiov;
- int64_t sector_num;
- int nb_sectors;
+ uint64_t offset;
+ uint64_t bytes;
size_t start;
size_t end;
@@ -115,7 +115,7 @@ typedef struct CURLState
CURL *curl;
QLIST_HEAD(, CURLSocket) sockets;
char *orig_buf;
- size_t buf_start;
+ uint64_t buf_start;
size_t buf_off;
size_t buf_len;
char range[128];
@@ -126,7 +126,7 @@ typedef struct CURLState
typedef struct BDRVCURLState {
CURLM *multi;
QEMUTimer timer;
- size_t len;
+ uint64_t len;
CURLState states[CURL_NUM_STATES];
char *url;
size_t readahead_size;
@@ -257,7 +257,7 @@ static size_t curl_read_cb(void *ptr, size_t size, size_t
nmemb, void *opaque)
continue;
if ((s->buf_off >= acb->end)) {
- size_t request_length = acb->nb_sectors * BDRV_SECTOR_SIZE;
+ size_t request_length = acb->bytes;
qemu_iovec_from_buf(acb->qiov, 0, s->orig_buf + acb->start,
acb->end - acb->start);
@@ -282,18 +282,18 @@ read_end:
}
/* Called with s->mutex held. */
-static int curl_find_buf(BDRVCURLState *s, size_t start, size_t len,
+static int curl_find_buf(BDRVCURLState *s, uint64_t start, uint64_t len,
CURLAIOCB *acb)
{
int i;
- size_t end = start + len;
- size_t clamped_end = MIN(end, s->len);
- size_t clamped_len = clamped_end - start;
+ uint64_t end = start + len;
+ uint64_t clamped_end = MIN(end, s->len);
+ uint64_t clamped_len = clamped_end - start;
for (i=0; i<CURL_NUM_STATES; i++) {
CURLState *state = &s->states[i];
- size_t buf_end = (state->buf_start + state->buf_off);
- size_t buf_fend = (state->buf_start + state->buf_len);
+ uint64_t buf_end = (state->buf_start + state->buf_off);
+ uint64_t buf_fend = (state->buf_start + state->buf_len);
if (!state->orig_buf)
continue;
@@ -788,7 +788,7 @@ static int curl_open(BlockDriverState *bs, QDict *options,
int flags,
}
#endif
- s->len = (size_t)d;
+ s->len = d;
if ((!strncasecmp(s->url, "http://", strlen("http://"))
|| !strncasecmp(s->url, "https://", strlen("https://")))
@@ -797,7 +797,7 @@ static int curl_open(BlockDriverState *bs, QDict *options,
int flags,
"Server does not support 'range' (byte ranges).");
goto out;
}
- DPRINTF("CURL: Size = %zd\n", s->len);
+ DPRINTF("CURL: Size = %" PRIu64 "\n", s->len);
qemu_mutex_lock(&s->mutex);
curl_clean_state(state);
@@ -836,14 +836,14 @@ static void curl_readv_bh_cb(void *p)
BlockDriverState *bs = acb->common.bs;
BDRVCURLState *s = bs->opaque;
- size_t start = acb->sector_num * BDRV_SECTOR_SIZE;
- size_t end;
+ uint64_t start = acb->offset;
+ uint64_t end;
qemu_mutex_lock(&s->mutex);
// In case we have the requested data already (e.g. read-ahead),
// we can just call the callback and be done.
- switch (curl_find_buf(s, start, acb->nb_sectors * BDRV_SECTOR_SIZE, acb)) {
+ switch (curl_find_buf(s, start, acb->bytes, acb)) {
case FIND_RET_OK:
ret = 0;
goto out;
@@ -871,7 +871,7 @@ static void curl_readv_bh_cb(void *p)
}
acb->start = 0;
- acb->end = MIN(acb->nb_sectors * BDRV_SECTOR_SIZE, s->len - start);
+ acb->end = MIN(acb->bytes, s->len - start);
state->buf_off = 0;
g_free(state->orig_buf);
@@ -886,9 +886,9 @@ static void curl_readv_bh_cb(void *p)
}
state->acb[0] = acb;
- snprintf(state->range, 127, "%zd-%zd", start, end);
- DPRINTF("CURL (AIO): Reading %llu at %zd (%s)\n",
- (acb->nb_sectors * BDRV_SECTOR_SIZE), start, state->range);
+ snprintf(state->range, 127, "%" PRIu64 "-%" PRIu64, start, end);
+ DPRINTF("CURL (AIO): Reading %" PRIu64 " at %" PRIu64 " (%s)\n",
+ acb->bytes, start, state->range);
curl_easy_setopt(state->curl, CURLOPT_RANGE, state->range);
curl_multi_add_handle(s->multi, state->curl);
@@ -913,8 +913,8 @@ static BlockAIOCB *curl_aio_readv(BlockDriverState *bs,
acb = qemu_aio_get(&curl_aiocb_info, bs, cb, opaque);
acb->qiov = qiov;
- acb->sector_num = sector_num;
- acb->nb_sectors = nb_sectors;
+ acb->offset = sector_num * BDRV_SECTOR_SIZE;
+ acb->bytes = nb_sectors * BDRV_SECTOR_SIZE;
aio_bh_schedule_oneshot(bdrv_get_aio_context(bs), curl_readv_bh_cb, acb);
return &acb->common;
--
2.12.2
- Re: [Qemu-stable] [Qemu-block] [PATCH 4/7] curl: split curl_find_state/curl_init_state, (continued)
- [Qemu-stable] [PATCH 3/7] curl: avoid recursive locking of BDRVCURLState mutex, Paolo Bonzini, 2017/05/10
- [Qemu-stable] [PATCH 7/7] curl: do not do aio_poll when waiting for a free CURLState, Paolo Bonzini, 2017/05/10
- [Qemu-stable] [PATCH 5/7] curl: convert CURLAIOCB to byte values,
Paolo Bonzini <=
- [Qemu-stable] [PATCH 6/7] curl: convert readv to coroutines, Paolo Bonzini, 2017/05/10
- Re: [Qemu-stable] [Qemu-devel] [PATCH v2 0/7] curl: locking cleanups/fixes, coroutine conversion, remove aio_poll, no-reply, 2017/05/10
- Re: [Qemu-stable] [PATCH v2 0/7] curl: locking cleanups/fixes, coroutine conversion, remove aio_poll, Richard W.M. Jones, 2017/05/10