[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[qemu-s390x] [PULL 08/15] pc-bios/s390-ccw: fix loadparm initialization
From: |
Cornelia Huck |
Subject: |
[qemu-s390x] [PULL 08/15] pc-bios/s390-ccw: fix loadparm initialization and int conversion |
Date: |
Fri, 4 May 2018 09:25:07 +0200 |
From: Collin Walling <address@hidden>
Rename the loadparm char array in main.c to loadparm_str and
increased the size by one byte to account for a null termination
when converting the loadparm string to an int via atoui. We
also allow the boot menu to be enabled when loadparm is set to
an empty string or a series of spaces.
Signed-off-by: Collin Walling <address@hidden>
Reported-by: Vasily Gorbik <address@hidden>
Reviewed-by: Thomas Huth <address@hidden>
Reviewed-by: Janosch Frank <address@hidden>
Signed-off-by: Thomas Huth <address@hidden>
---
hw/s390x/ipl.c | 4 ++++
pc-bios/s390-ccw/main.c | 14 +++++++-------
2 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c
index fb554ab156..150f6c0582 100644
--- a/hw/s390x/ipl.c
+++ b/hw/s390x/ipl.c
@@ -373,6 +373,10 @@ int s390_ipl_set_loadparm(uint8_t *loadparm)
loadparm[i] = ascii2ebcdic[(uint8_t) lp[i]];
}
+ if (i < 8) {
+ memset(loadparm + i, 0x40, 8 - i); /* fill with EBCDIC spaces */
+ }
+
g_free(lp);
return 0;
}
diff --git a/pc-bios/s390-ccw/main.c b/pc-bios/s390-ccw/main.c
index 9d9f8cf4d3..26f9adf84a 100644
--- a/pc-bios/s390-ccw/main.c
+++ b/pc-bios/s390-ccw/main.c
@@ -15,11 +15,11 @@
char stack[PAGE_SIZE * 8] __attribute__((__aligned__(PAGE_SIZE)));
static SubChannelId blk_schid = { .one = 1 };
IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
-static char loadparm[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+static char loadparm_str[9] = { 0, 0, 0, 0, 0, 0, 0, 0, 0 };
QemuIplParameters qipl;
#define LOADPARM_PROMPT "PROMPT "
-#define LOADPARM_EMPTY "........"
+#define LOADPARM_EMPTY " "
#define BOOT_MENU_FLAG_MASK (QIPL_FLAG_BM_OPTS_CMD | QIPL_FLAG_BM_OPTS_ZIPL)
/*
@@ -45,7 +45,7 @@ void panic(const char *string)
unsigned int get_loadparm_index(void)
{
- return atoui(loadparm);
+ return atoui(loadparm_str);
}
static bool find_dev(Schib *schib, int dev_no)
@@ -80,13 +80,13 @@ static bool find_dev(Schib *schib, int dev_no)
static void menu_setup(void)
{
- if (memcmp(loadparm, LOADPARM_PROMPT, 8) == 0) {
+ if (memcmp(loadparm_str, LOADPARM_PROMPT, 8) == 0) {
menu_set_parms(QIPL_FLAG_BM_OPTS_CMD, 0);
return;
}
/* If loadparm was set to any other value, then do not enable menu */
- if (memcmp(loadparm, LOADPARM_EMPTY, 8) != 0) {
+ if (memcmp(loadparm_str, LOADPARM_EMPTY, 8) != 0) {
return;
}
@@ -116,8 +116,8 @@ static void virtio_setup(void)
*/
enable_mss_facility();
- sclp_get_loadparm_ascii(loadparm);
- memcpy(ldp + 10, loadparm, 8);
+ sclp_get_loadparm_ascii(loadparm_str);
+ memcpy(ldp + 10, loadparm_str, 8);
sclp_print(ldp);
memcpy(&qipl, early_qipl, sizeof(QemuIplParameters));
--
2.14.3
- [qemu-s390x] [PULL 00/15] first s390x update for 2.13, Cornelia Huck, 2018/05/04
- [qemu-s390x] [PULL 01/15] s390x: introduce 2.13 compat machine, Cornelia Huck, 2018/05/04
- [qemu-s390x] [PULL 03/15] vfio-ccw: introduce vfio_ccw_get_device(), Cornelia Huck, 2018/05/04
- [qemu-s390x] [PULL 02/15] s390x/sclp: extend SCLP event masks to 64 bits, Cornelia Huck, 2018/05/04
- [qemu-s390x] [PULL 04/15] s390x/kvm: cleanup calls to cpu_synchronize_state(), Cornelia Huck, 2018/05/04
- [qemu-s390x] [PULL 06/15] pc-bios/s390-ccw: size_t should be unsigned, Cornelia Huck, 2018/05/04
- [qemu-s390x] [PULL 05/15] hw/s390x: Allow to configure the consoles with the "-serial" parameter, Cornelia Huck, 2018/05/04
- [qemu-s390x] [PULL 07/15] pc-bios/s390-ccw: rename MAX_TABLE_ENTRIES to MAX_BOOT_ENTRIES, Cornelia Huck, 2018/05/04
- [qemu-s390x] [PULL 08/15] pc-bios/s390-ccw: fix loadparm initialization and int conversion,
Cornelia Huck <=
- [qemu-s390x] [PULL 09/15] pc-bios/s390-ccw: fix non-sequential boot entries (eckd), Cornelia Huck, 2018/05/04
- [qemu-s390x] [PULL 10/15] pc-bios/s390-ccw: fix non-sequential boot entries (enum), Cornelia Huck, 2018/05/04
- [qemu-s390x] [PULL 11/15] pc-bios/s390-ccw/net: Split up net_load() into init, load and release parts, Cornelia Huck, 2018/05/04
- [qemu-s390x] [PULL 13/15] pc-bios/s390-ccw/net: Add support for .INS config files, Cornelia Huck, 2018/05/04
- [qemu-s390x] [PULL 12/15] pc-bios/s390-ccw/net: Use diag308 to reset machine before jumping to the OS, Cornelia Huck, 2018/05/04