[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] [PATCHv3 7/7] spapr: Improved placement of PCI host bridg
From: |
Laurent Vivier |
Subject: |
Re: [Qemu-ppc] [PATCHv3 7/7] spapr: Improved placement of PCI host bridges in guest memory map |
Date: |
Fri, 14 Oct 2016 09:25:58 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.3.0 |
On 14/10/2016 01:29, David Gibson wrote:
> From 98f07c09c6d72218800d6cfbf44b973a88ece2aa Mon Sep 17 00:00:00 2001
> From: David Gibson <address@hidden>
> Date: Fri, 14 Oct 2016 10:21:00 +1100
> Subject: [PATCH] spapr: Improved placement of PCI host bridges in guest memory
> map
>
> Currently, the MMIO space for accessing PCI on pseries guests begins at
> 1 TiB in guest address space. Each PCI host bridge (PHB) has a 64 GiB
> chunk of address space in which it places its outbound PIO and 32-bit and
> 64-bit MMIO windows.
>
> This scheme as several problems:
> - It limits guest RAM to 1 TiB (though we have a limited fix for this
> now)
> - It limits the total MMIO window to 64 GiB. This is not always enough
> for some of the large nVidia GPGPU cards
> - Putting all the windows into a single 64 GiB area means that naturally
> aligning things within there will waste more address space.
> In addition there was a miscalculation in some of the defaults, which meant
> that the MMIO windows for each PHB actually slightly overran the 64 GiB
> region for that PHB. We got away without nasty consequences because
> the overrun fit within an unused area at the beginning of the next PHB's
> region, but it's not pretty.
>
> This patch implements a new scheme which addresses those problems, and is
> also closer to what bare metal hardware and pHyp guests generally use.
>
> Because some guest versions (including most current distro kernels) can't
> access PCI MMIO above 64 TiB, we put all the PCI windows between 32 TiB and
> 64 TiB. This is broken into 1 TiB chunks. The 1 TiB contains the PIO
> (64 kiB) and 32-bit MMIO (2 GiB) windows for all of the PHBs. Each
> subsequent TiB chunk contains a naturally aligned 64-bit MMIO window for
> one PHB each.
>
> This reduces the number of allowed PHBs (without full manual configuration
> of all the windows) from 256 to 31, but this should still be plenty in
> practice.
>
> We also change some of the default window sizes for manually configured
> PHBs to saner values.
>
> Finally we adjust some tests and libqos so that it correctly uses the new
> default locations. Ideally it would parse the device tree given to the
> guest, but that's a more complex problem for another time.
>
> Signed-off-by: David Gibson <address@hidden>
I really like this new version.
Reviewed-by: Laurent Vivier <address@hidden>
Laurent
> ---
> hw/ppc/spapr.c | 121
> +++++++++++++++++++++++++++++++++-----------
> hw/ppc/spapr_pci.c | 5 +-
> include/hw/pci-host/spapr.h | 8 ++-
> tests/endianness-test.c | 3 +-
> tests/libqos/pci-spapr.c | 9 ++--
> tests/spapr-phb-test.c | 2 +-
> 6 files changed, 108 insertions(+), 40 deletions(-)
>
> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
> index 8db3657..4bdf15b 100644
> --- a/hw/ppc/spapr.c
> +++ b/hw/ppc/spapr.c
> @@ -2375,31 +2375,37 @@ static void spapr_phb_placement(sPAPRMachineState
> *spapr, uint32_t index,
> hwaddr *mmio32, hwaddr *mmio64,
> unsigned n_dma, uint32_t *liobns, Error
> **errp)
> {
> + /*
> + * New-style PHB window placement.
> + *
> + * Goals: Gives large (1TiB), naturally aligned 64-bit MMIO window
> + * for each PHB, in addition to 2GiB 32-bit MMIO and 64kiB PIO
> + * windows.
> + *
> + * Some guest kernels can't work with MMIO windows above 1<<46
> + * (64TiB), so we place up to 31 PHBs in the area 32TiB..64TiB
> + *
> + * 32TiB..33TiB contains the PIO and 32-bit MMIO windows for all
> + * PHBs. 33..34TiB has the 64-bit MMIO window for PHB0, 34..35
> + * has the 64-bit window for PHB1 and so forth.
> + */
> const uint64_t base_buid = 0x800000020000000ULL;
> - const hwaddr phb_spacing = 0x1000000000ULL; /* 64 GiB */
> - const hwaddr mmio_offset = 0xa0000000; /* 2 GiB + 512 MiB */
> - const hwaddr pio_offset = 0x80000000; /* 2 GiB */
> - const uint32_t max_index = 255;
> - const hwaddr phb0_alignment = 0x10000000000ULL; /* 1 TiB */
> -
> - uint64_t ram_top = MACHINE(spapr)->ram_size;
> - hwaddr phb0_base, phb_base;
> + const int max_phbs =
> + (SPAPR_PCI_LIMIT - SPAPR_PCI_BASE) / SPAPR_PCI_MEM64_WIN_SIZE - 1;
> int i;
>
> - /* Do we have hotpluggable memory? */
> - if (MACHINE(spapr)->maxram_size > ram_top) {
> - /* Can't just use maxram_size, because there may be an
> - * alignment gap between normal and hotpluggable memory
> - * regions */
> - ram_top = spapr->hotplug_memory.base +
> - memory_region_size(&spapr->hotplug_memory.mr);
> - }
> -
> - phb0_base = QEMU_ALIGN_UP(ram_top, phb0_alignment);
> + /* Sanity check natural alignments */
> + QEMU_BUILD_BUG_ON((SPAPR_PCI_BASE % SPAPR_PCI_MEM64_WIN_SIZE) != 0);
> + QEMU_BUILD_BUG_ON((SPAPR_PCI_LIMIT % SPAPR_PCI_MEM64_WIN_SIZE) != 0);
> + QEMU_BUILD_BUG_ON((SPAPR_PCI_MEM64_WIN_SIZE % SPAPR_PCI_MEM32_WIN_SIZE)
> != 0);
> + QEMU_BUILD_BUG_ON((SPAPR_PCI_MEM32_WIN_SIZE % SPAPR_PCI_IO_WIN_SIZE) !=
> 0);
> + /* Sanity check bounds */
> + QEMU_BUILD_BUG_ON((max_phbs * SPAPR_PCI_IO_WIN_SIZE) >
> SPAPR_PCI_MEM32_WIN_SIZE);
> + QEMU_BUILD_BUG_ON((max_phbs * SPAPR_PCI_MEM32_WIN_SIZE) >
> SPAPR_PCI_MEM64_WIN_SIZE);
>
> - if (index > max_index) {
> + if (index >= max_phbs) {
> error_setg(errp, "\"index\" for PAPR PHB is too large (max %u)",
> - max_index);
> + max_phbs - 1);
> return;
> }
>
> @@ -2408,14 +2414,9 @@ static void spapr_phb_placement(sPAPRMachineState
> *spapr, uint32_t index,
> liobns[i] = SPAPR_PCI_LIOBN(index, i);
> }
>
> - phb_base = phb0_base + index * phb_spacing;
> - *pio = phb_base + pio_offset;
> - *mmio32 = phb_base + mmio_offset;
> - /*
> - * We don't set the 64-bit MMIO window, relying on the PHB's
> - * fallback behaviour of automatically splitting a large "32-bit"
> - * window into contiguous 32-bit and 64-bit windows
> - */
> + *pio = SPAPR_PCI_BASE + index * SPAPR_PCI_IO_WIN_SIZE;
> + *mmio32 = SPAPR_PCI_BASE + (index + 1) * SPAPR_PCI_MEM32_WIN_SIZE;
> + *mmio64 = SPAPR_PCI_BASE + (index + 1) * SPAPR_PCI_MEM64_WIN_SIZE;
> }
>
> static void spapr_machine_class_init(ObjectClass *oc, void *data)
> @@ -2519,8 +2520,67 @@ DEFINE_SPAPR_MACHINE(2_8, "2.8", true);
> /*
> * pseries-2.7
> */
> -#define SPAPR_COMPAT_2_7 \
> - HW_COMPAT_2_7 \
> +#define SPAPR_COMPAT_2_7 \
> + HW_COMPAT_2_7 \
> + { \
> + .driver = TYPE_SPAPR_PCI_HOST_BRIDGE, \
> + .property = "mem_win_size", \
> + .value = stringify(SPAPR_PCI_2_7_MMIO_WIN_SIZE),\
> + }, \
> + { \
> + .driver = TYPE_SPAPR_PCI_HOST_BRIDGE, \
> + .property = "mem64_win_size", \
> + .value = "0", \
> + },
> +
> +static void phb_placement_2_7(sPAPRMachineState *spapr, uint32_t index,
> + uint64_t *buid, hwaddr *pio,
> + hwaddr *mmio32, hwaddr *mmio64,
> + unsigned n_dma, uint32_t *liobns, Error **errp)
> +{
> + /* Legacy PHB placement for pseries-2.7 and earlier machine types */
> + const uint64_t base_buid = 0x800000020000000ULL;
> + const hwaddr phb_spacing = 0x1000000000ULL; /* 64 GiB */
> + const hwaddr mmio_offset = 0xa0000000; /* 2 GiB + 512 MiB */
> + const hwaddr pio_offset = 0x80000000; /* 2 GiB */
> + const uint32_t max_index = 255;
> + const hwaddr phb0_alignment = 0x10000000000ULL; /* 1 TiB */
> +
> + uint64_t ram_top = MACHINE(spapr)->ram_size;
> + hwaddr phb0_base, phb_base;
> + int i;
> +
> + /* Do we have hotpluggable memory? */
> + if (MACHINE(spapr)->maxram_size > ram_top) {
> + /* Can't just use maxram_size, because there may be an
> + * alignment gap between normal and hotpluggable memory
> + * regions */
> + ram_top = spapr->hotplug_memory.base +
> + memory_region_size(&spapr->hotplug_memory.mr);
> + }
> +
> + phb0_base = QEMU_ALIGN_UP(ram_top, phb0_alignment);
> +
> + if (index > max_index) {
> + error_setg(errp, "\"index\" for PAPR PHB is too large (max %u)",
> + max_index);
> + return;
> + }
> +
> + *buid = base_buid + index;
> + for (i = 0; i < n_dma; ++i) {
> + liobns[i] = SPAPR_PCI_LIOBN(index, i);
> + }
> +
> + phb_base = phb0_base + index * phb_spacing;
> + *pio = phb_base + pio_offset;
> + *mmio32 = phb_base + mmio_offset;
> + /*
> + * We don't set the 64-bit MMIO window, relying on the PHB's
> + * fallback behaviour of automatically splitting a large "32-bit"
> + * window into contiguous 32-bit and 64-bit windows
> + */
> +}
>
> static void spapr_machine_2_7_instance_options(MachineState *machine)
> {
> @@ -2533,6 +2593,7 @@ static void
> spapr_machine_2_7_class_options(MachineClass *mc)
> spapr_machine_2_8_class_options(mc);
> smc->tcg_default_cpu = "POWER7";
> SET_MACHINE_COMPAT(mc, SPAPR_COMPAT_2_7);
> + smc->phb_placement = phb_placement_2_7;
> }
>
> DEFINE_SPAPR_MACHINE(2_7, "2.7", false);
> diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
> index 31ca6fa..3ef6a26 100644
> --- a/hw/ppc/spapr_pci.c
> +++ b/hw/ppc/spapr_pci.c
> @@ -1565,9 +1565,10 @@ static Property spapr_phb_properties[] = {
> DEFINE_PROP_UINT32("liobn64", sPAPRPHBState, dma_liobn[1], -1),
> DEFINE_PROP_UINT64("mem_win_addr", sPAPRPHBState, mem_win_addr, -1),
> DEFINE_PROP_UINT64("mem_win_size", sPAPRPHBState, mem_win_size,
> - SPAPR_PCI_MMIO_WIN_SIZE),
> + SPAPR_PCI_MEM32_WIN_SIZE),
> DEFINE_PROP_UINT64("mem64_win_addr", sPAPRPHBState, mem64_win_addr, -1),
> - DEFINE_PROP_UINT64("mem64_win_size", sPAPRPHBState, mem64_win_size, 0),
> + DEFINE_PROP_UINT64("mem64_win_size", sPAPRPHBState, mem64_win_size,
> + SPAPR_PCI_MEM64_WIN_SIZE),
> DEFINE_PROP_UINT64("mem64_win_pciaddr", sPAPRPHBState, mem64_win_pciaddr,
> -1),
> DEFINE_PROP_UINT64("io_win_addr", sPAPRPHBState, io_win_addr, -1),
> diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
> index 23dfb09..b92c1b5 100644
> --- a/include/hw/pci-host/spapr.h
> +++ b/include/hw/pci-host/spapr.h
> @@ -84,8 +84,14 @@ struct sPAPRPHBState {
> #define SPAPR_PCI_MEM_WIN_BUS_OFFSET 0x80000000ULL
> #define SPAPR_PCI_MEM32_WIN_SIZE \
> ((1ULL << 32) - SPAPR_PCI_MEM_WIN_BUS_OFFSET)
> +#define SPAPR_PCI_MEM64_WIN_SIZE 0x10000000000ULL /* 1 TiB */
>
> -#define SPAPR_PCI_MMIO_WIN_SIZE 0xf80000000
> +/* Without manual configuration, all PCI outbound windows will be
> + * within this range */
> +#define SPAPR_PCI_BASE (1ULL << 45) /* 32 TiB */
> +#define SPAPR_PCI_LIMIT (1ULL << 46) /* 64 TiB */
> +
> +#define SPAPR_PCI_2_7_MMIO_WIN_SIZE 0xf80000000
> #define SPAPR_PCI_IO_WIN_SIZE 0x10000
>
> #define SPAPR_PCI_MSI_WINDOW 0x40000000000ULL
> diff --git a/tests/endianness-test.c b/tests/endianness-test.c
> index b7a120e..cf8d41b 100644
> --- a/tests/endianness-test.c
> +++ b/tests/endianness-test.c
> @@ -38,7 +38,8 @@ static const TestCase test_cases[] = {
> { "ppc", "prep", 0x80000000, .bswap = true },
> { "ppc", "bamboo", 0xe8000000, .bswap = true, .superio = "i82378" },
> { "ppc64", "mac99", 0xf2000000, .bswap = true, .superio = "i82378" },
> - { "ppc64", "pseries", 0x10080000000ULL,
> + { "ppc64", "pseries", (1ULL << 45), .bswap = true, .superio = "i82378" },
> + { "ppc64", "pseries-2.7", 0x10080000000ULL,
> .bswap = true, .superio = "i82378" },
> { "sh4", "r2d", 0xfe240000, .superio = "i82378" },
> { "sh4eb", "r2d", 0xfe240000, .bswap = true, .superio = "i82378" },
> diff --git a/tests/libqos/pci-spapr.c b/tests/libqos/pci-spapr.c
> index 558dfc3..2eaaf91 100644
> --- a/tests/libqos/pci-spapr.c
> +++ b/tests/libqos/pci-spapr.c
> @@ -235,10 +235,9 @@ static void qpci_spapr_iounmap(QPCIBus *bus, void *data)
> /* FIXME */
> }
>
> -#define SPAPR_PCI_WINDOW_BASE 0x10000000000ULL
> -#define SPAPR_PCI_MMIO32_WIN_OFF 0xA0000000
> +#define SPAPR_PCI_BASE (1ULL << 45)
> +
> #define SPAPR_PCI_MMIO32_WIN_SIZE 0x80000000 /* 2 GiB */
> -#define SPAPR_PCI_IO_WIN_OFF 0x80000000
> #define SPAPR_PCI_IO_WIN_SIZE 0x10000
>
> QPCIBus *qpci_init_spapr(QGuestAllocator *alloc)
> @@ -273,12 +272,12 @@ QPCIBus *qpci_init_spapr(QGuestAllocator *alloc)
> * get the window locations */
> ret->buid = 0x800000020000000ULL;
>
> - ret->pio_cpu_base = SPAPR_PCI_WINDOW_BASE + SPAPR_PCI_IO_WIN_OFF;
> + ret->pio_cpu_base = SPAPR_PCI_BASE;
> ret->pio.pci_base = 0;
> ret->pio.size = SPAPR_PCI_IO_WIN_SIZE;
>
> /* 32-bit portion of the MMIO window is at PCI address 2..4 GiB */
> - ret->mmio32_cpu_base = SPAPR_PCI_WINDOW_BASE + SPAPR_PCI_MMIO32_WIN_OFF;
> + ret->mmio32_cpu_base = SPAPR_PCI_BASE + SPAPR_PCI_MMIO32_WIN_SIZE;
> ret->mmio32.pci_base = 0x80000000; /* 2 GiB */
> ret->mmio32.size = SPAPR_PCI_MMIO32_WIN_SIZE;
>
> diff --git a/tests/spapr-phb-test.c b/tests/spapr-phb-test.c
> index 21004a7..d3522ea 100644
> --- a/tests/spapr-phb-test.c
> +++ b/tests/spapr-phb-test.c
> @@ -25,7 +25,7 @@ int main(int argc, char **argv)
> g_test_init(&argc, &argv, NULL);
> qtest_add_func("/spapr-phb/device", test_phb_device);
>
> - qtest_start("-device " TYPE_SPAPR_PCI_HOST_BRIDGE ",index=100");
> + qtest_start("-device " TYPE_SPAPR_PCI_HOST_BRIDGE ",index=30");
>
> ret = g_test_run();
>
>
- Re: [Qemu-ppc] [PATCHv3 5/7] spapr: Adjust placement of PCI host bridge to allow > 1TiB RAM, (continued)
- [Qemu-ppc] [PATCHv3 3/7] libqos: Limit spapr-pci to 32-bit MMIO for now, David Gibson, 2016/10/12
- [Qemu-ppc] [PATCHv3 4/7] spapr_pci: Delegate placement of PCI host bridges to machine type, David Gibson, 2016/10/12
- [Qemu-ppc] [PATCHv3 6/7] spapr_pci: Add a 64-bit MMIO window, David Gibson, 2016/10/12
- [Qemu-ppc] [PATCHv3 1/7] libqos: Isolate knowledge of spapr memory map to qpci_init_spapr(), David Gibson, 2016/10/12
- [Qemu-ppc] [PATCHv3 7/7] spapr: Improved placement of PCI host bridges in guest memory map, David Gibson, 2016/10/12
Re: [Qemu-ppc] [Qemu-devel] [PATCHv3 0/7] Improve PCI IO window orgnaization for pseries, no-reply, 2016/10/14