Re: [Qemu-ppc] [PATCH v2 1/7] ppc/pnv: add skeleton PowerNV platform

[Greg Kurz]

On Wed, 31 Aug 2016 18:34:09 +0200
Cédric Le Goater <address@hidden> wrote:

> From: Benjamin Herrenschmidt <address@hidden>
> 
> The goal is to emulate a PowerNV system at the level of the skiboot
> firmware, which loads the OS and provides some runtime services. Power
> Systems have a lower firmware (HostBoot) that does low level system
> initialization, like DRAM training. This is beyond the scope of what
> qemu will address in a PowerNV guest.
> 
> No devices yet, not even an interrupt controller. Just to get started,
> some RAM to load the skiboot firmware, the kernel and initrd. The
> device tree is fully created in the machine reset op.
> 
> Signed-off-by: Benjamin Herrenschmidt <address@hidden>
> [clg: - updated for qemu-2.7
>       - replaced fprintf by error_report
>       - used a common definition of _FDT macro
>       - removed VMStateDescription as migration is not yet supported
>       - added IBM Copyright statements
>       - reworked kernel_filename handling
>       - merged PnvSystem and sPowerNVMachineState
>       - removed PHANDLE_XICP
>       - added ppc_create_page_sizes_prop helper
>       - removed nmi support
>       - removed kvm support
>       - updated powernv machine to version 2.8
>       - removed chips and cpus, They will be provided in another patches
>       - added a machine reset routine to initialize the device tree (also)
>       - french has a squelette and english a skeleton.
>       - improved commit log.
>       - reworked prototypes parameters
>       - added a check on the ram size (thanks to Michael Ellerman)
>       - fixed chip-id cell
>       - changed MAX_CPUS to 2048
>       - simplified memory node creation to one node only
>       - removed machine version
>       - rewrote the device tree creation with the fdt "rw" routines
>       - s/sPowerNVMachineState/PnvMachineState/
>       - etc.
> ]
> Signed-off-by: Cédric Le Goater <address@hidden>
> ---
> 
>  Changes since v1:
> 
>  - changed MAX_CPUS to 2048
>  - simplified memory node creation to one node only
>  - removed machine version 
>  - rewrote the device tree creation with the fdt "rw" routines
>  - s/sPowerNVMachineState/PnvMachineState/
>  - block_default_type is back to IF_IDE because of the AHCI device
> 
>  default-configs/ppc64-softmmu.mak |   1 +
>  hw/ppc/Makefile.objs              |   2 +
>  hw/ppc/pnv.c                      | 244 
> ++++++++++++++++++++++++++++++++++++++
>  include/hw/ppc/pnv.h              |  37 ++++++
>  4 files changed, 284 insertions(+)
>  create mode 100644 hw/ppc/pnv.c
>  create mode 100644 include/hw/ppc/pnv.h
> 
> diff --git a/default-configs/ppc64-softmmu.mak 
> b/default-configs/ppc64-softmmu.mak
> index c4be59f638ed..516a6e25aba3 100644
> --- a/default-configs/ppc64-softmmu.mak
> +++ b/default-configs/ppc64-softmmu.mak
> @@ -40,6 +40,7 @@ CONFIG_I8259=y
>  CONFIG_XILINX=y
>  CONFIG_XILINX_ETHLITE=y
>  CONFIG_PSERIES=y
> +CONFIG_POWERNV=y
>  CONFIG_PREP=y
>  CONFIG_MAC=y
>  CONFIG_E500=y
> diff --git a/hw/ppc/Makefile.objs b/hw/ppc/Makefile.objs
> index 99a0d4e581bf..8105db7d5600 100644
> --- a/hw/ppc/Makefile.objs
> +++ b/hw/ppc/Makefile.objs
> @@ -5,6 +5,8 @@ obj-$(CONFIG_PSERIES) += spapr.o spapr_vio.o spapr_events.o
>  obj-$(CONFIG_PSERIES) += spapr_hcall.o spapr_iommu.o spapr_rtas.o
>  obj-$(CONFIG_PSERIES) += spapr_pci.o spapr_rtc.o spapr_drc.o spapr_rng.o
>  obj-$(CONFIG_PSERIES) += spapr_cpu_core.o
> +# IBM PowerNV
> +obj-$(CONFIG_POWERNV) += pnv.o
>  ifeq ($(CONFIG_PCI)$(CONFIG_PSERIES)$(CONFIG_LINUX), yyy)
>  obj-y += spapr_pci_vfio.o
>  endif
> diff --git a/hw/ppc/pnv.c b/hw/ppc/pnv.c
> new file mode 100644
> index 000000000000..70413e3c5740
> --- /dev/null
> +++ b/hw/ppc/pnv.c
> @@ -0,0 +1,244 @@
> +/*
> + * QEMU PowerPC PowerNV model
> + *
> + * Copyright (c) 2004-2007 Fabrice Bellard
> + * Copyright (c) 2007 Jocelyn Mayer
> + * Copyright (c) 2010 David Gibson, IBM Corporation.
> + * Copyright (c) 2014-2016 BenH, IBM Corporation.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a 
> copy
> + * of this software and associated documentation files (the "Software"), to 
> deal
> + * in the Software without restriction, including without limitation the 
> rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
> FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + *
> + */

This file is a new contribution to QEMU. According to the LICENSE file, it 
should
be released under GPL version 2 or later. If Ben agrees, probably better to have
the same text as in include/hw/ppc/pnv.h below.

> [...]
> --- /dev/null
> +++ b/include/hw/ppc/pnv.h
> @@ -0,0 +1,37 @@
> +/*
> + * QEMU PowerNV various definitions
> + *
> + * Copyright (c) 2014-2016 BenH, IBM Corporation.
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see 
> <http://www.gnu.org/licenses/>.
> + */