[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] [PATCH v1 10/11] ppc/xics: Add "native" XICS subclass
From: |
David Gibson |
Subject: |
Re: [Qemu-ppc] [PATCH v1 10/11] ppc/xics: Add "native" XICS subclass |
Date: |
Tue, 28 Jun 2016 12:58:26 +1000 |
User-agent: |
Mutt/1.6.1 (2016-04-27) |
On Mon, Jun 27, 2016 at 03:23:13PM +0530, Nikunj A Dadhania wrote:
> David Gibson <address@hidden> writes:
>
> > [ Unknown signature status ]
> > On Thu, Jun 23, 2016 at 11:17:29PM +0530, Nikunj A Dadhania wrote:
> >> From: Benjamin Herrenschmidt <address@hidden>
> >>
> >> This provides MMIO based ICP access as found on POWER8
> >>
> >> Signed-off-by: Benjamin Herrenschmidt <address@hidden>
> >> Signed-off-by: Nikunj A Dadhania <address@hidden>
> >> ---
> >> default-configs/ppc64-softmmu.mak | 3 +-
> >> hw/intc/Makefile.objs | 1 +
> >> hw/intc/xics_native.c | 295
> >> ++++++++++++++++++++++++++++++++++++++
> >> include/hw/ppc/xics.h | 14 ++
> >> 4 files changed, 312 insertions(+), 1 deletion(-)
> >> create mode 100644 hw/intc/xics_native.c
> >>
> >> diff --git a/default-configs/ppc64-softmmu.mak
> >> b/default-configs/ppc64-softmmu.mak
> >> index c4be59f..315e30b 100644
> >> --- a/default-configs/ppc64-softmmu.mak
> >> +++ b/default-configs/ppc64-softmmu.mak
> >> @@ -48,8 +48,9 @@ CONFIG_PLATFORM_BUS=y
> >> CONFIG_ETSEC=y
> >> CONFIG_LIBDECNUMBER=y
> >> # For pSeries
> >> -CONFIG_XICS=$(CONFIG_PSERIES)
> >> +CONFIG_XICS=$(or $(CONFIG_PSERIES),$(CONFIG_POWERNV))
> >> CONFIG_XICS_SPAPR=$(CONFIG_PSERIES)
> >> +CONFIG_XICS_NATIVE=$(CONFIG_POWERNV)
> >> CONFIG_XICS_KVM=$(and $(CONFIG_PSERIES),$(CONFIG_KVM))
> >
> > I don't think you've introduced CONFIG_POWERNV in your patches so far,
> > making this a bit weird.
>
> I had kept this patch for completeness and review. We can push this once
> the POWERNV bits trickles in.
>
> >
> >> # For PReP
> >> CONFIG_MC146818RTC=y
> >> diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs
> >> index 530df2e..f8bbeda 100644
> >> --- a/hw/intc/Makefile.objs
> >> +++ b/hw/intc/Makefile.objs
> >> @@ -31,6 +31,7 @@ obj-$(CONFIG_RASPI) += bcm2835_ic.o bcm2836_control.o
> >> obj-$(CONFIG_SH4) += sh_intc.o
> >> obj-$(CONFIG_XICS) += xics.o
> >> obj-$(CONFIG_XICS_SPAPR) += xics_spapr.o
> >> +obj-$(CONFIG_XICS_NATIVE) += xics_native.o
> >> obj-$(CONFIG_XICS_KVM) += xics_kvm.o
> >> obj-$(CONFIG_ALLWINNER_A10_PIC) += allwinner-a10-pic.o
> >> obj-$(CONFIG_S390_FLIC) += s390_flic.o
> >> diff --git a/hw/intc/xics_native.c b/hw/intc/xics_native.c
> >> new file mode 100644
> >> index 0000000..26e45cc
> >> --- /dev/null
> >> +++ b/hw/intc/xics_native.c
> >> @@ -0,0 +1,295 @@
> >> +/*
> >> + * QEMU PowerPC hardware System Emulator
> >> + *
> >> + * Native version of ICS/ICP
> >> + *
> >> + * Copyright (c) 2010,2011 David Gibson, IBM Corporation.
> >
> > Surely this should have yours or Ben's copyright in addition to mine.
>
> Sure, will add Ben's copyright.
>
> >> + * Permission is hereby granted, free of charge, to any person obtaining
> >> a copy
> >> + * of this software and associated documentation files (the "Software"),
> >> to deal
> >> + * in the Software without restriction, including without limitation the
> >> rights
> >> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or
> >> sell
> >> + * copies of the Software, and to permit persons to whom the Software is
> >> + * furnished to do so, subject to the following conditions:
> >> + *
> >> + * The above copyright notice and this permission notice shall be
> >> included in
> >> + * all copies or substantial portions of the Software.
> >> + *
> >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> >> EXPRESS OR
> >> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> >> MERCHANTABILITY,
> >> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> >> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
> >> OTHER
> >> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> >> ARISING FROM,
> >> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> >> IN
> >> + * THE SOFTWARE.
> >> + *
> >> + */
> >> +
> >> +#include "qemu/osdep.h"
> >> +#include "hw/hw.h"
> >> +#include "trace.h"
> >> +#include "qemu/timer.h"
> >> +#include "hw/ppc/xics.h"
> >> +#include "qapi/visitor.h"
> >> +#include "qapi/error.h"
> >> +
> >> +#include <libfdt.h>
> >> +
> >> +/* #define DEBUG_MM(fmt...) printf(fmt) */
> >> +#define DEBUG_MM(fmt...) do { } while (0)
> >> +
> >> +static void xics_native_initfn(Object *obj)
> >> +{
> >> + XICSState *xics = XICS_NATIVE(obj);
> >> +
> >> + QLIST_INIT(&xics->ics);
> >> +}
> >> +
> >> +static uint64_t icp_mm_read(void *opaque, hwaddr addr, unsigned width)
> >> +{
> >> + XICSState *s = opaque;
> >> + int32_t cpu_id, server;
> >> + uint32_t val;
> >> + ICPState *ss;
> >> + bool byte0 = (width == 1 && (addr & 0x3) == 0);
> >> +
> >> + cpu_id = (addr & (ICP_MM_SIZE - 1)) >> 12;
> >> + server = get_cpu_index_by_dt_id(cpu_id);
> >
> > Shouldn't each ICP instance register its own MMIO window?
>
> That is how the hardware works. Moreover, there is an SCOM that controls
> ICP BAR. We might support moving the ICP BAR at some stage so I'd rather
> keep it consistent.
Ok.
>
> [...]
>
> >> +
> >> +#define _FDT(exp) \
> >> + do { \
> >> + int ret = (exp); \
> >> + if (ret < 0) { \
> >> + fprintf(stderr, "qemu: error creating device tree: %s: %s\n",
> >> \
> >> + #exp, fdt_strerror(ret)); \
> >> + exit(1); \
> >> + } \
> >> + } while (0)
> >
> > Ugh, I have got to find time to push by qdt cleanup stuff again.
>
> Yes, those are nice set of patches.
>
> > Not within scope for this patch obviously, though.
> >
> >>
> >> #define XICS_IPI 0x2
> >> #define XICS_BUID 0x1
> >> @@ -84,6 +89,7 @@ struct XICSState {
> >> uint32_t nr_irqs;
> >> ICPState *ss;
> >> QLIST_HEAD(, ICSState) ics;
> >> + MemoryRegion icp_mmio;
> >
> > This is only used by XICSNative, so it should be in a structure just
> > for the subclass, not in the common struct.
>
> Sure.
>
> >> };
> >>
> >> #define TYPE_ICP "icp"
> >> @@ -115,8 +121,13 @@ struct ICPState {
> >> uint8_t mfrr;
> >> qemu_irq output;
> >> bool cap_irq_xics_enabled;
> >> + uint32_t links[3];
> >
> > Likewise here.
>
> Ok.
>
> Regards
> Nikunj
>
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
signature.asc
Description: PGP signature
- Re: [Qemu-ppc] [PATCH v1 06/11] ppc/xics: Make the ICSState a list, (continued)
- [Qemu-ppc] [PATCH v1 07/11] ppc/xics: An ICS with offset 0 is assumed to be uninitialized, Nikunj A Dadhania, 2016/06/23
- [Qemu-ppc] [PATCH v1 08/11] ppc/xics: Use a helper to add a new ICS, Nikunj A Dadhania, 2016/06/23
- [Qemu-ppc] [PATCH v1 11/11] ppc/xics: Add xics to the monitor "info pic" command, Nikunj A Dadhania, 2016/06/23
- [Qemu-ppc] [PATCH v1 10/11] ppc/xics: Add "native" XICS subclass, Nikunj A Dadhania, 2016/06/23
- [Qemu-ppc] [PATCH v1 09/11] ppc/xics: Split ICS into ics-base and ics class, Nikunj A Dadhania, 2016/06/23
- Re: [Qemu-ppc] [PATCH v1 09/11] ppc/xics: Split ICS into ics-base and ics class, David Gibson, 2016/06/27
- Re: [Qemu-ppc] [PATCH v1 09/11] ppc/xics: Split ICS into ics-base and ics class, Nikunj A Dadhania, 2016/06/27
- Re: [Qemu-ppc] [PATCH v1 09/11] ppc/xics: Split ICS into ics-base and ics class, Nikunj A Dadhania, 2016/06/27
- Re: [Qemu-ppc] [PATCH v1 09/11] ppc/xics: Split ICS into ics-base and ics class, David Gibson, 2016/06/27
- Re: [Qemu-ppc] [PATCH v1 09/11] ppc/xics: Split ICS into ics-base and ics class, Nikunj A Dadhania, 2016/06/28
- Re: [Qemu-ppc] [PATCH v1 09/11] ppc/xics: Split ICS into ics-base and ics class, David Gibson, 2016/06/28