[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH 10/11] hw/sd: Remove unused legacy functions, stop killing mammot
From: |
Peter Maydell |
Subject: |
[PATCH 10/11] hw/sd: Remove unused legacy functions, stop killing mammoths |
Date: |
Tue, 28 Jan 2025 10:45:18 +0000 |
The sdcard_legacy.h header defines function prototypes for the "legacy"
SD card API, which was used by non-qdevified SD controller models.
We've now converted the only remaining non-qdev SD controller, so
we can drop the legacy API.
Entirely unused functions:
sd_init(), sd_set_cb(), sd_enable()
Functions which now become static inside sd.c (they are the
underlying implementations of methods on SDCardClass):
sd_do_command(), sd_write_byte(), sd_read_byte()
Removal of sd_init() means that we can also remove the
me_no_qdev_me_kill_mammoth_with_rocks flag, the codepaths that were
only reachable when it was set, and the inserted_cb and readonly_cb
qemu_irq lines that went with that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/sd/sdcard_legacy.h | 50 -----------------------
hw/sd/omap_mmc.c | 2 +-
hw/sd/sd.c | 77 ++++-------------------------------
3 files changed, 9 insertions(+), 120 deletions(-)
delete mode 100644 include/hw/sd/sdcard_legacy.h
diff --git a/include/hw/sd/sdcard_legacy.h b/include/hw/sd/sdcard_legacy.h
deleted file mode 100644
index 0dc38895551..00000000000
--- a/include/hw/sd/sdcard_legacy.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * SD Memory Card emulation (deprecated legacy API)
- *
- * Copyright (c) 2006 Andrzej Zaborowski <balrog@zabor.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS''
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
- * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
- * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#ifndef HW_SDCARD_LEGACY_H
-#define HW_SDCARD_LEGACY_H
-
-#include "hw/sd/sd.h"
-
-/* Legacy functions to be used only by non-qdevified callers */
-SDState *sd_init(BlockBackend *blk, bool is_spi);
-int sd_do_command(SDState *card, SDRequest *request, uint8_t *response);
-void sd_write_byte(SDState *card, uint8_t value);
-uint8_t sd_read_byte(SDState *card);
-void sd_set_cb(SDState *card, qemu_irq readonly, qemu_irq insert);
-
-/* sd_enable should not be used -- it is only used on the nseries boards,
- * where it is part of a broken implementation of the MMC card slot switch
- * (there should be two card slots which are multiplexed to a single MMC
- * controller, but instead we model it with one card and controller and
- * disable the card when the second slot is selected, so it looks like the
- * second slot is always empty).
- */
-void sd_enable(SDState *card, bool enable);
-
-#endif /* HW_SDCARD_LEGACY_H */
diff --git a/hw/sd/omap_mmc.c b/hw/sd/omap_mmc.c
index c1598135f44..d31456ad236 100644
--- a/hw/sd/omap_mmc.c
+++ b/hw/sd/omap_mmc.c
@@ -25,7 +25,7 @@
#include "hw/irq.h"
#include "hw/sysbus.h"
#include "hw/arm/omap.h"
-#include "hw/sd/sdcard_legacy.h"
+#include "hw/sd/sd.h"
typedef struct OMAPMMCState {
SysBusDevice parent_obj;
diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index f781fd1641d..74bb7f39bbf 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -39,7 +39,6 @@
#include "hw/registerfields.h"
#include "system/block-backend.h"
#include "hw/sd/sd.h"
-#include "hw/sd/sdcard_legacy.h"
#include "migration/vmstate.h"
#include "qapi/error.h"
#include "qemu/bitmap.h"
@@ -120,10 +119,6 @@ typedef struct SDProto {
struct SDState {
DeviceState parent_obj;
- /* If true, created by sd_init() for a non-qdevified caller */
- /* TODO purge them with fire */
- bool me_no_qdev_me_kill_mammoth_with_rocks;
-
/* SD Memory Card Registers */
uint32_t ocr;
uint8_t scr[8];
@@ -177,8 +172,6 @@ struct SDState {
uint32_t data_offset;
size_t data_size;
uint8_t data[512];
- qemu_irq readonly_cb;
- qemu_irq inserted_cb;
QEMUTimer *ocr_power_timer;
bool enable;
uint8_t dat_lines;
@@ -892,17 +885,10 @@ static void sd_cardchange(void *opaque, bool load, Error
**errp)
trace_sdcard_ejected();
}
- if (sd->me_no_qdev_me_kill_mammoth_with_rocks) {
- qemu_set_irq(sd->inserted_cb, inserted);
- if (inserted) {
- qemu_set_irq(sd->readonly_cb, readonly);
- }
- } else {
- sdbus = SD_BUS(qdev_get_parent_bus(dev));
- sdbus_set_inserted(sdbus, inserted);
- if (inserted) {
- sdbus_set_readonly(sdbus, readonly);
- }
+ sdbus = SD_BUS(qdev_get_parent_bus(dev));
+ sdbus_set_inserted(sdbus, inserted);
+ if (inserted) {
+ sdbus_set_readonly(sdbus, readonly);
}
}
@@ -1000,48 +986,6 @@ static const VMStateDescription sd_vmstate = {
},
};
-/* Legacy initialization function for use by non-qdevified callers */
-SDState *sd_init(BlockBackend *blk, bool is_spi)
-{
- Object *obj;
- DeviceState *dev;
- SDState *sd;
- Error *err = NULL;
-
- obj = object_new(is_spi ? TYPE_SD_CARD_SPI : TYPE_SD_CARD);
- dev = DEVICE(obj);
- if (!qdev_prop_set_drive_err(dev, "drive", blk, &err)) {
- error_reportf_err(err, "sd_init failed: ");
- return NULL;
- }
-
- /*
- * Realizing the device properly would put it into the QOM
- * composition tree even though it is not plugged into an
- * appropriate bus. That's a no-no. Hide the device from
- * QOM/qdev, and call its qdev realize callback directly.
- */
- object_ref(obj);
- object_unparent(obj);
- sd_realize(dev, &err);
- if (err) {
- error_reportf_err(err, "sd_init failed: ");
- return NULL;
- }
-
- sd = SD_CARD(dev);
- sd->me_no_qdev_me_kill_mammoth_with_rocks = true;
- return sd;
-}
-
-void sd_set_cb(SDState *sd, qemu_irq readonly, qemu_irq insert)
-{
- sd->readonly_cb = readonly;
- sd->inserted_cb = insert;
- qemu_set_irq(readonly, sd->blk ? !blk_is_writable(sd->blk) : 0);
- qemu_set_irq(insert, sd->blk ? blk_is_inserted(sd->blk) : 0);
-}
-
static void sd_blk_read(SDState *sd, uint64_t addr, uint32_t len)
{
trace_sdcard_read_block(addr, len);
@@ -2196,8 +2140,8 @@ static bool cmd_valid_while_locked(SDState *sd, unsigned
cmd)
return cmd_class == 0 || cmd_class == 7;
}
-int sd_do_command(SDState *sd, SDRequest *req,
- uint8_t *response) {
+static int sd_do_command(SDState *sd, SDRequest *req,
+ uint8_t *response) {
int last_state;
sd_rsp_type_t rtype;
int rsplen;
@@ -2349,7 +2293,7 @@ static bool sd_generic_read_byte(SDState *sd, uint8_t
*value)
return false;
}
-void sd_write_byte(SDState *sd, uint8_t value)
+static void sd_write_byte(SDState *sd, uint8_t value)
{
int i;
@@ -2478,7 +2422,7 @@ void sd_write_byte(SDState *sd, uint8_t value)
}
}
-uint8_t sd_read_byte(SDState *sd)
+static uint8_t sd_read_byte(SDState *sd)
{
/* TODO: Append CRCs */
const uint8_t dummy_byte = 0x00;
@@ -2561,11 +2505,6 @@ static bool sd_data_ready(SDState *sd)
return sd->state == sd_sendingdata_state;
}
-void sd_enable(SDState *sd, bool enable)
-{
- sd->enable = enable;
-}
-
static const SDProto sd_proto_spi = {
.name = "SPI",
.cmd = {
--
2.34.1
- [PATCH 03/11] hw/sd/omap_mmc: Convert output qemu_irqs to gpio and sysbus IRQ APIs, (continued)
- [PATCH 03/11] hw/sd/omap_mmc: Convert output qemu_irqs to gpio and sysbus IRQ APIs, Peter Maydell, 2025/01/28
- [PATCH 08/11] hw/sd/omap_mmc: Untabify, Peter Maydell, 2025/01/28
- [PATCH 04/11] hw/sd/omap_mmc: Convert to SDBus API, Peter Maydell, 2025/01/28
- [PATCH 05/11] hw/sd/omap_mmc: Use similar API for "wire up omap_clk" to other OMAP devices, Peter Maydell, 2025/01/28
- [PATCH 10/11] hw/sd: Remove unused legacy functions, stop killing mammoths,
Peter Maydell <=
- [PATCH 09/11] hw/sd: Remove unused 'enable' method from SDCardClass, Peter Maydell, 2025/01/28