[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH V7 24/24] migration: cpr-transfer documentation
From: |
Fabiano Rosas |
Subject: |
Re: [PATCH V7 24/24] migration: cpr-transfer documentation |
Date: |
Fri, 17 Jan 2025 11:42:29 -0300 |
Steve Sistare <steven.sistare@oracle.com> writes:
> Add documentation for the cpr-transfer migration mode.
>
> Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
> Reviewed-by: Peter Xu <peterx@redhat.com>
> ---
> docs/devel/migration/CPR.rst | 182
> ++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 180 insertions(+), 2 deletions(-)
>
> diff --git a/docs/devel/migration/CPR.rst b/docs/devel/migration/CPR.rst
> index 63c3647..d6021d5 100644
> --- a/docs/devel/migration/CPR.rst
> +++ b/docs/devel/migration/CPR.rst
> @@ -5,7 +5,7 @@ CPR is the umbrella name for a set of migration modes in
> which the
> VM is migrated to a new QEMU instance on the same host. It is
> intended for use when the goal is to update host software components
> that run the VM, such as QEMU or even the host kernel. At this time,
> -cpr-reboot is the only available mode.
> +the cpr-reboot and cpr-transfer modes are available.
>
> Because QEMU is restarted on the same host, with access to the same
> local devices, CPR is allowed in certain cases where normal migration
> @@ -53,7 +53,7 @@ RAM is copied to the migration URI.
> Outgoing:
> * Set the migration mode parameter to ``cpr-reboot``.
> * Set the ``x-ignore-shared`` capability if desired.
> - * Issue the ``migrate`` command. It is recommended the the URI be a
> + * Issue the ``migrate`` command. It is recommended the URI be a
> ``file`` type, but one can use other types such as ``exec``,
> provided the command captures all the data from the outgoing side,
> and provides all the data to the incoming side.
> @@ -145,3 +145,181 @@ Caveats
>
> cpr-reboot mode may not be used with postcopy, background-snapshot,
> or COLO.
> +
> +cpr-transfer mode
> +-----------------
> +
> +This mode allows the user to transfer a guest to a new QEMU instance
> +on the same host with minimal guest pause time, by preserving guest
> +RAM in place, albeit with new virtual addresses in new QEMU. Devices
> +and their pinned memory pages will also be preserved in a future QEMU
> +release.
> +
> +The user starts new QEMU on the same host as old QEMU, with command-
> +line arguments to create the same machine, plus the ``-incoming``
> +option for the main migration channel, like normal live migration.
> +In addition, the user adds a second -incoming option with channel
> +type ``cpr``. This CPR channel must support file descriptor transfer
> +with SCM_RIGHTS, i.e. it must be a UNIX domain socket.
> +
> +To initiate CPR, the user issues a migrate command to old QEMU,
> +adding a second migration channel of type ``cpr`` in the channels
> +argument. Old QEMU stops the VM, saves state to the migration
> +channels, and enters the postmigrate state. Execution resumes in
> +new QEMU.
> +
> +New QEMU reads the CPR channel before opening a monitor, hence
> +the CPR channel cannot be specified in the list of channels for a
> +migrate-incoming command. It may only be specified on the command
> +line.
> +
> +Usage
> +^^^^^
> +
> +Memory backend objects must have the ``share=on`` attribute.
> +
> +The VM must be started with the ``-machine aux-ram-share=on``
> +option. This causes implicit RAM blocks (those not described by
> +a memory-backend object) to be allocated by mmap'ing a memfd.
> +Examples include VGA and ROM.
> +
> +Outgoing:
> + * Set the migration mode parameter to ``cpr-transfer``.
> + * Issue the ``migrate`` command, containing a main channel and
> + a cpr channel.
> +
> +Incoming:
> + * Start new QEMU with two ``-incoming`` options.
> + * If the VM was running when the outgoing ``migrate`` command was
> + issued, then QEMU automatically resumes VM execution.
> +
> +Caveats
> +^^^^^^^
> +
> +cpr-transfer mode may not be used with postcopy, background-snapshot,
> +or COLO.
> +
> +memory-backend-epc is not supported.
> +
> +The main incoming migration channel address cannot be a file type.
> +
> +If the main incoming channel address is an inet socket, then the port
> +cannot be 0 (meaning dynamically choose a port).
> +
> +When using ``-incoming defer``, you must issue the migrate command to
> +old QEMU before issuing any monitor commands to new QEMU, because new
> +QEMU blocks waiting to read from the cpr channel before starting its
> +monitor, and old QEMU does not write to the channel until the migrate
> +command is issued. However, new QEMU does not open and read the
> +main migration channel until you issue the migrate incoming command.
> +
> +Example 1: incoming channel
> +^^^^^^^^^^^^^^^^^^^^^^^^^^^
> +
> +In these examples, we simply restart the same version of QEMU, but
> +in a real scenario one would start new QEMU on the incoming side.
> +Note that new QEMU does not print the monitor prompt until old QEMU
> +has issued the migrate command. The outgoing side uses QMP because
> +HMP cannot specify a CPR channel. Some QMP responses are omitted for
> +brevity.
> +
> +::
> +
> + Outgoing: Incoming:
> +
> + # qemu-kvm -qmp stdio
> + -object memory-backend-file,id=ram0,size=4G,
> + mem-path=/dev/shm/ram0,share=on -m 4G
> + -machine aux-ram-share=on
> + ...
> + # qemu-kvm -monitor stdio
> + -incoming tcp:0:44444
> + -incoming '{"channel-type": "cpr",
> + "addr": { "transport": "socket",
> + "type": "unix", "path":
> "cpr.sock"}}'
> + ...
I'm attempting this and not having much success. Surely I'm missing
something:
$ qemu-system-x86_64 -cpu host -smp 16 -machine pc,accel=kvm \
-drive id=drive0,if=none,format=qcow2,file=img.qcow2 \
-device virtio-blk-pci,id=image1,drive=drive0,bootindex=0 \
-qmp unix:./dst-qmp.sock,server,wait=off \
-nographic -serial mon:stdio \
-object memory-backend-file,id=ram0,size=4G,mem-path=/dev/shm/ram0,share=on \
-m 4G -machine aux-ram-share=on \
-incoming tcp:0:44444 \
-incoming '{"channel-type": "cpr", "addr": { "transport": "socket", "type":
"unix", "path": "cpr.sock"}}' \
-trace loadvm_* -trace cpr_* -trace migration_* -trace migrate_* -trace
qemu_loadvm_*
cpr_transfer_input cpr.sock
cpr_state_load cpr-transfer mode
cpr_find_fd pc.bios, id 0 returns 15
cpr_find_fd pc.rom, id 0 returns 14
cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 13
cpr_find_fd 0000:00:02.0/vga.rom, id 0 returns 12
cpr_find_fd 0000:00:03.0/e1000.rom, id 0 returns 11
cpr_find_fd /rom@etc/acpi/tables, id 0 returns 10
cpr_find_fd /rom@etc/table-loader, id 0 returns 8
cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 3
migrate_set_state new state setup
migration_socket_incoming_accepted
migration_set_incoming_channel ioc=0x564dc31e7000 ioctype=qio-channel-socket
migrate_set_state new state active
loadvm_state_setup
qemu_loadvm_state_section 1
qemu_loadvm_state_section_startfull 2(ram) 0 4
qemu_loadvm_state_section 3
qemu_loadvm_state_section_partend 2
qemu_loadvm_state_section 4
qemu_loadvm_state_section_startfull 0(timer) 0 2
qemu_loadvm_state_section 4
qemu_loadvm_state_section_startfull 1(slirp) 0 4
qemu_loadvm_state_section 4
qemu_loadvm_state_section_startfull 4(cpu_common) 0 1
qemu_loadvm_state_section 4
qemu_loadvm_state_section_startfull 5(cpu) 0 12
qemu_loadvm_state_section 4
qemu_loadvm_state_section_startfull 6(kvm-tpr-opt) 0 1
qemu-system-x86_64: error while loading state for instance 0x0 of device
'kvm-tpr-opt'
qemu_loadvm_state_post_main -1
migrate_set_state new state failed
migrate_error error=load of migration failed: Operation not permitted
loadvm_state_cleanup
qemu-system-x86_64: load of migration failed: Operation not permitted
> + {"execute":"qmp_capabilities"}
> +
> + {"execute": "query-status"}
> + {"return": {"status": "running",
> + "running": true}}
> +
> + {"execute":"migrate-set-parameters",
> + "arguments":{"mode":"cpr-transfer"}}
> +
> + {"execute": "migrate", "arguments": { "channels": [
> + {"channel-type": "main",
> + "addr": { "transport": "socket", "type": "inet",
> + "host": "0", "port": "44444" }},
> + {"channel-type": "cpr",
> + "addr": { "transport": "socket", "type": "unix",
> + "path": "cpr.sock" }}]}}
> +
> + QEMU 10.0.50 monitor
> + (qemu) info status
> + VM status: running
> +
> + {"execute": "query-status"}
> + {"return": {"status": "postmigrate",
> + "running": false}}
> +
> +Example 2: incoming defer
> +^^^^^^^^^^^^^^^^^^^^^^^^^
> +
> +This example uses ``-incoming defer`` to hot plug a device before
> +accepting the main migration channel. Again note you must issue the
> +migrate command to old QEMU before you can issue any monitor
> +commands to new QEMU.
> +
> +
> +::
> +
> + Outgoing: Incoming:
> +
> + # qemu-kvm -monitor stdio
> + -object memory-backend-file,id=ram0,size=4G,
> + mem-path=/dev/shm/ram0,share=on -m 4G
> + -machine aux-ram-share=on
> + ...
> + # qemu-kvm -monitor stdio
> + -incoming defer
> + -incoming '{"channel-type": "cpr",
> + "addr": { "transport": "socket",
> + "type": "unix", "path":
> "cpr.sock"}}'
> + ...
> + {"execute":"qmp_capabilities"}
> +
> + {"execute": "device_add",
> + "arguments": {"driver": "pcie-root-port"}}
> +
> + {"execute":"migrate-set-parameters",
> + "arguments":{"mode":"cpr-transfer"}}
> +
> + {"execute": "migrate", "arguments": { "channels": [
> + {"channel-type": "main",
> + "addr": { "transport": "socket", "type": "inet",
> + "host": "0", "port": "44444" }},
> + {"channel-type": "cpr",
> + "addr": { "transport": "socket", "type": "unix",
> + "path": "cpr.sock" }}]}}
> +
> + QEMU 10.0.50 monitor
> + (qemu) info status
> + VM status: paused (inmigrate)
> + (qemu) device_add pcie-root-port
> + (qemu) migrate_incoming tcp:0:44444
> + (qemu) info status
> + VM status: running
> +
> + {"execute": "query-status"}
> + {"return": {"status": "postmigrate",
> + "running": false}}
> +
> +Futures
> +^^^^^^^
> +
> +cpr-transfer mode is based on a capability to transfer open file
> +descriptors from old to new QEMU. In the future, descriptors for
> +vfio, iommufd, vhost, and char devices could be transferred,
> +preserving those devices and their kernel state without interruption,
> +even if they do not explicitly support live migration.
- [PATCH V7 12/24] migration: incoming channel, (continued)
- [PATCH V7 12/24] migration: incoming channel, Steve Sistare, 2025/01/15
- [PATCH V7 14/24] migration: VMSTATE_FD, Steve Sistare, 2025/01/15
- [PATCH V7 13/24] migration: SCM_RIGHTS for QEMUFile, Steve Sistare, 2025/01/15
- [PATCH V7 17/24] migration-test: memory_backend, Steve Sistare, 2025/01/15
- [PATCH V7 15/24] migration: cpr-transfer save and load, Steve Sistare, 2025/01/15
- [PATCH V7 10/24] hostmem-shm: preserve for cpr, Steve Sistare, 2025/01/15
- [PATCH V7 16/24] migration: cpr-transfer mode, Steve Sistare, 2025/01/15
- [PATCH V7 22/24] tests/qtest: assert qmp connected, Steve Sistare, 2025/01/15
- [PATCH V7 21/24] tests/qtest: enhance migration channels, Steve Sistare, 2025/01/15
- [PATCH V7 24/24] migration: cpr-transfer documentation, Steve Sistare, 2025/01/15
- Re: [PATCH V7 24/24] migration: cpr-transfer documentation,
Fabiano Rosas <=
- Re: [PATCH V7 24/24] migration: cpr-transfer documentation, Steven Sistare, 2025/01/17
- Re: [PATCH V7 24/24] migration: cpr-transfer documentation, Fabiano Rosas, 2025/01/17
- Re: [PATCH V7 24/24] migration: cpr-transfer documentation, Steven Sistare, 2025/01/17
- Re: [PATCH V7 24/24] migration: cpr-transfer documentation, Fabiano Rosas, 2025/01/17
- Re: [PATCH V7 24/24] migration: cpr-transfer documentation, Steven Sistare, 2025/01/17
- Re: [PATCH V7 24/24] migration: cpr-transfer documentation, Fabiano Rosas, 2025/01/17
[PATCH V7 18/24] tests/qtest: optimize migrate_set_ports, Steve Sistare, 2025/01/15
[PATCH V7 19/24] tests/qtest: defer connection, Steve Sistare, 2025/01/15
[PATCH V7 20/24] migration-test: defer connection, Steve Sistare, 2025/01/15
[PATCH V7 23/24] migration-test: cpr-transfer, Steve Sistare, 2025/01/15