Re: [PATCH v12 3/3] Versal: Connect DWC3 controller with virt-versal

[Peter Maydell]

On Thu, 22 Oct 2020 at 13:11, Sai Pavan Boddu
<sai.pavan.boddu@xilinx.com> wrote:
>
> From: Vikram Garhwal <fnu.vikram@xilinx.com>
>
> Connect dwc3 controller and usb2-reg module to xlnx-versal SOC, its placed
> in iou of lpd domain and configure it as dual port host controller. Add the
> respective guest dts nodes for "xlnx-versal-virt" machine.
>
> Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
> Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>


> +static void versal_create_usbs(Versal *s, qemu_irq *pic)
> +{
> +    DeviceState *dev, *xhci_dev;
> +    MemoryRegion *mr;
> +
> +    object_initialize_child(OBJECT(s), "dwc3-0", &s->lpd.iou.usb.dwc3,
> +                            TYPE_USB_DWC3);
> +    dev = DEVICE(&s->lpd.iou.usb.dwc3);
> +    xhci_dev = DEVICE(&s->lpd.iou.usb.dwc3.sysbus_xhci);

If you find yourself fishing around in the internals of
another device, especially to this depth, then something's
probably not right in the structure of that device.

> +
> +    object_property_set_link(OBJECT(xhci_dev), "dma", OBJECT(&s->mr_ps),
> +                             &error_abort);
> +    qdev_prop_set_uint32(xhci_dev, "intrs", 1);
> +    qdev_prop_set_uint32(xhci_dev, "slots", 2);
> +
> +    sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
> +
> +    mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
> +    memory_region_add_subregion(&s->mr_ps, MM_USB_XHCI_0_DWC3_GLOBAL, mr);
> +    mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(xhci_dev), 0);
> +    memory_region_add_subregion(&s->mr_ps, MM_USB_XHCI_0, mr);

For instance, rather than having to find the xhci device and
map its memory regions and connect its IRQs directly, the
usb-dwc3 device could provide and pass through those MRs and
IRQs, so that board code is only wiring up what the usb-dwc3
provides and doesn't need to know about its internals.


thanks
-- PMM