qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v2 04/10] target/ppc: Introduce ppc_hash64_use_vrma() helper


From: Cédric Le Goater
Subject: Re: [PATCH v2 04/10] target/ppc: Introduce ppc_hash64_use_vrma() helper
Date: Tue, 7 Jan 2020 14:24:52 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.2.2

On 1/7/20 5:48 AM, David Gibson wrote:
> When running guests under a hypervisor, the hypervisor obviously needs to
> be protected from guest accesses even if those are in what the guest
> considers real mode (translation off).  The POWER hardware provides two
> ways of doing that: The old way has guest real mode accesses simply offset
> and bounds checked into host addresses.  It works, but requires that a
> significant chunk of the guest's memory - the RMA - be physically
> contiguous in the host, which is pretty inconvenient.  The new way, known
> as VRMA, has guest real mode accesses translated in roughly the normal way
> but with some special parameters.
> 
> In POWER7 and POWER8 the LPCR[VPM0] bit selected between the two modes, but
> in POWER9 only VRMA mode is supported and LPCR[VPM0] no longer exists.  We
> handle that difference in behaviour in ppc_hash64_set_isi().. but not in
> other places that we blindly check LPCR[VPM0].
> 
> Correct those instances with a new helper to tell if we should be in VRMA
> mode.
> 
> Signed-off-by: David Gibson <address@hidden>


Reviewed-by: Cédric Le Goater <address@hidden>

> ---
>  target/ppc/mmu-hash64.c | 41 +++++++++++++++++++----------------------
>  1 file changed, 19 insertions(+), 22 deletions(-)
> 
> diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c
> index 5fabd93c92..d878180df5 100644
> --- a/target/ppc/mmu-hash64.c
> +++ b/target/ppc/mmu-hash64.c
> @@ -668,6 +668,19 @@ unsigned ppc_hash64_hpte_page_shift_noslb(PowerPCCPU 
> *cpu,
>      return 0;
>  }
>  
> +static bool ppc_hash64_use_vrma(CPUPPCState *env)
> +{
> +    switch (env->mmu_model) {
> +    case POWERPC_MMU_3_00:
> +        /* ISAv3.0 (POWER9) always uses VRMA, the VPM0 field and RMOR
> +         * register no longer exist */
> +        return true;
> +
> +    default:
> +        return !!(env->spr[SPR_LPCR] & LPCR_VPM0);
> +    }
> +}
> +
>  static void ppc_hash64_set_isi(CPUState *cs, uint64_t error_code)
>  {
>      CPUPPCState *env = &POWERPC_CPU(cs)->env;
> @@ -676,15 +689,7 @@ static void ppc_hash64_set_isi(CPUState *cs, uint64_t 
> error_code)
>      if (msr_ir) {
>          vpm = !!(env->spr[SPR_LPCR] & LPCR_VPM1);
>      } else {
> -        switch (env->mmu_model) {
> -        case POWERPC_MMU_3_00:
> -            /* Field deprecated in ISAv3.00 - interrupts always go to hyperv 
> */
> -            vpm = true;
> -            break;
> -        default:
> -            vpm = !!(env->spr[SPR_LPCR] & LPCR_VPM0);
> -            break;
> -        }
> +        vpm = ppc_hash64_use_vrma(env);
>      }
>      if (vpm && !msr_hv) {
>          cs->exception_index = POWERPC_EXCP_HISI;
> @@ -702,15 +707,7 @@ static void ppc_hash64_set_dsi(CPUState *cs, uint64_t 
> dar, uint64_t dsisr)
>      if (msr_dr) {
>          vpm = !!(env->spr[SPR_LPCR] & LPCR_VPM1);
>      } else {
> -        switch (env->mmu_model) {
> -        case POWERPC_MMU_3_00:
> -            /* Field deprecated in ISAv3.00 - interrupts always go to hyperv 
> */
> -            vpm = true;
> -            break;
> -        default:
> -            vpm = !!(env->spr[SPR_LPCR] & LPCR_VPM0);
> -            break;
> -        }
> +        vpm = ppc_hash64_use_vrma(env);
>      }
>      if (vpm && !msr_hv) {
>          cs->exception_index = POWERPC_EXCP_HDSI;
> @@ -799,7 +796,7 @@ int ppc_hash64_handle_mmu_fault(PowerPCCPU *cpu, vaddr 
> eaddr,
>              if (!(eaddr >> 63)) {
>                  raddr |= env->spr[SPR_HRMOR];
>              }
> -        } else if (env->spr[SPR_LPCR] & LPCR_VPM0) {
> +        } else if (ppc_hash64_use_vrma(env)) {
>              /* Emulated VRMA mode */
>              slb = &env->vrma_slb;
>              if (!slb->sps) {
> @@ -967,7 +964,7 @@ hwaddr ppc_hash64_get_phys_page_debug(PowerPCCPU *cpu, 
> target_ulong addr)
>          } else if ((msr_hv || !env->has_hv_mode) && !(addr >> 63)) {
>              /* In HV mode, add HRMOR if top EA bit is clear */
>              return raddr | env->spr[SPR_HRMOR];
> -        } else if (env->spr[SPR_LPCR] & LPCR_VPM0) {
> +        } else if (ppc_hash64_use_vrma(env)) {
>              /* Emulated VRMA mode */
>              slb = &env->vrma_slb;
>              if (!slb->sps) {
> @@ -1056,8 +1053,7 @@ static void ppc_hash64_update_vrma(PowerPCCPU *cpu)
>      slb->sps = NULL;
>  
>      /* Is VRMA enabled ? */
> -    lpcr = env->spr[SPR_LPCR];
> -    if (!(lpcr & LPCR_VPM0)) {
> +    if (ppc_hash64_use_vrma(env)) {
>          return;
>      }
>  
> @@ -1065,6 +1061,7 @@ static void ppc_hash64_update_vrma(PowerPCCPU *cpu)
>       * Make one up. Mostly ignore the ESID which will not be needed
>       * for translation
>       */
> +    lpcr = env->spr[SPR_LPCR];
>      vsid = SLB_VSID_VRMA;
>      vrmasd = (lpcr & LPCR_VRMASD) >> LPCR_VRMASD_SHIFT;
>      vsid |= (vrmasd << 4) & (SLB_VSID_L | SLB_VSID_LP);
> 




reply via email to

[Prev in Thread] Current Thread [Next in Thread]