qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v29 6/8] target/avr: Add example board configuration


From: Michael Rolnik
Subject: [Qemu-devel] [PATCH v29 6/8] target/avr: Add example board configuration
Date: Sat, 24 Aug 2019 21:46:33 +0300

From: Sarah Harris <address@hidden>

A simple board setup that configures an AVR CPU to run a given firmware image.
This is all that's useful to implement without peripheral emulation as AVR CPUs 
include a lot of on-board peripherals.

NOTE: this is not a real board !!!!
NOTE: it's used for CPU testing!!!!

Signed-off-by: Michael Rolnik <address@hidden>
---
 hw/Kconfig           |   1 +
 hw/avr/Kconfig       |   6 +
 hw/avr/Makefile.objs |   1 +
 hw/avr/sample.c      | 282 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 290 insertions(+)
 create mode 100644 hw/avr/Kconfig
 create mode 100644 hw/avr/Makefile.objs
 create mode 100644 hw/avr/sample.c

diff --git a/hw/Kconfig b/hw/Kconfig
index b45db3c813..f185fcb19e 100644
--- a/hw/Kconfig
+++ b/hw/Kconfig
@@ -42,6 +42,7 @@ source watchdog/Kconfig
 # arch Kconfig
 source arm/Kconfig
 source alpha/Kconfig
+source avr/Kconfig
 source cris/Kconfig
 source hppa/Kconfig
 source i386/Kconfig
diff --git a/hw/avr/Kconfig b/hw/avr/Kconfig
new file mode 100644
index 0000000000..92aa1e6afb
--- /dev/null
+++ b/hw/avr/Kconfig
@@ -0,0 +1,6 @@
+config AVR_SAMPLE
+    bool
+    select AVR_TIMER16
+    select AVR_USART
+    select AVR_MASK
+    select UNIMP
diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
new file mode 100644
index 0000000000..626b7064b3
--- /dev/null
+++ b/hw/avr/Makefile.objs
@@ -0,0 +1 @@
+obj-y += sample.o
diff --git a/hw/avr/sample.c b/hw/avr/sample.c
new file mode 100644
index 0000000000..2295ec1b79
--- /dev/null
+++ b/hw/avr/sample.c
@@ -0,0 +1,282 @@
+/*
+ * QEMU AVR CPU
+ *
+ * Copyright (c) 2019 Michael Rolnik
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/lgpl-2.1.html>
+ */
+
+/*
+ *  NOTE:
+ *      This is not a real AVR board, this is an example!
+ *      The CPU is an approximation of an ATmega2560, but is missing various
+ *      built-in peripherals.
+ *
+ *      This example board loads provided binary file into flash memory and
+ *      executes it from 0x00000000 address in the code memory space.
+ *
+ *      Currently used for AVR CPU validation
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu-common.h"
+#include "cpu.h"
+#include "hw/hw.h"
+#include "sysemu/sysemu.h"
+#include "sysemu/qtest.h"
+#include "ui/console.h"
+#include "hw/boards.h"
+#include "hw/loader.h"
+#include "qemu/error-report.h"
+#include "exec/address-spaces.h"
+#include "include/hw/sysbus.h"
+#include "include/hw/char/avr_usart.h"
+#include "include/hw/timer/avr_timer16.h"
+#include "include/hw/misc/avr_mask.h"
+#include "elf.h"
+#include "hw/misc/unimp.h"
+
+#define SIZE_FLASH 0x00040000
+#define SIZE_SRAM 0x00002000
+/*
+ * Size of additional "external" memory, as if the AVR were configured to use
+ * an external RAM chip.
+ * Note that the configuration registers that normally enable this feature are
+ * unimplemented.
+ */
+#define SIZE_EXMEM 0x00000000
+
+/* Offsets of peripherals in emulated memory space (i.e. not host addresses)  
*/
+#define PRR0_BASE 0x64
+#define PRR1_BASE 0x65
+#define USART_BASE 0xc0
+#define TIMER1_BASE 0x80
+#define TIMER1_IMSK_BASE 0x6f
+#define TIMER1_IFR_BASE 0x36
+
+/* Interrupt numbers used by peripherals */
+#define USART_RXC_IRQ 24
+#define USART_DRE_IRQ 25
+#define USART_TXC_IRQ 26
+
+#define TIMER1_CAPT_IRQ 15
+#define TIMER1_COMPA_IRQ 16
+#define TIMER1_COMPB_IRQ 17
+#define TIMER1_COMPC_IRQ 18
+#define TIMER1_OVF_IRQ 19
+
+/*  Power reduction     */
+#define PRR1_BIT_PRTIM5     0x05    /*  Timer/Counter5  */
+#define PRR1_BIT_PRTIM4     0x04    /*  Timer/Counter4  */
+#define PRR1_BIT_PRTIM3     0x03    /*  Timer/Counter3  */
+#define PRR1_BIT_PRUSART3   0x02    /*  USART3  */
+#define PRR1_BIT_PRUSART2   0x01    /*  USART2  */
+#define PRR1_BIT_PRUSART1   0x00    /*  USART1  */
+
+#define PRR0_BIT_PRTWI      0x06    /*  TWI */
+#define PRR0_BIT_PRTIM2     0x05    /*  Timer/Counter2  */
+#define PRR0_BIT_PRTIM0     0x04    /*  Timer/Counter0  */
+#define PRR0_BIT_PRTIM1     0x03    /*  Timer/Counter1  */
+#define PRR0_BIT_PRSPI      0x02    /*  Serial Peripheral Interface */
+#define PRR0_BIT_PRUSART0   0x01    /*  USART0  */
+#define PRR0_BIT_PRADC      0x00    /*  ADC */
+
+typedef struct {
+    MachineClass parent;
+} SampleMachineClass;
+
+typedef struct {
+    MachineState parent;
+    MemoryRegion *ram;
+    MemoryRegion *flash;
+    AVRUsartState *usart0;
+    AVRTimer16State *timer1;
+    AVRMaskState *prr[2];
+} SampleMachineState;
+
+#define TYPE_SAMPLE_MACHINE MACHINE_TYPE_NAME("sample")
+
+#define SAMPLE_MACHINE(obj) \
+    OBJECT_CHECK(SampleMachineState, obj, TYPE_SAMPLE_MACHINE)
+#define SAMPLE_MACHINE_GET_CLASS(obj) \
+    OBJECT_GET_CLASS(SampleMachineClass, obj, TYPE_SAMPLE_MACHINE)
+#define SAMPLE_MACHINE_CLASS(klass) \
+    OBJECT_CLASS_CHECK(SampleMachineClass, klass, TYPE_SAMPLE_MACHINE)
+
+static void sample_init(MachineState *machine)
+{
+    SampleMachineState *sms = SAMPLE_MACHINE(machine);
+    MemoryRegion *system_memory = get_system_memory();
+    AVRCPU *cpu;
+    const char *firmware = NULL;
+    const char *filename;
+    int bytes_loaded;
+    SysBusDevice *busdev;
+    DeviceState *cpudev;
+
+    system_memory = get_system_memory();
+    sms->ram = g_new(MemoryRegion, 1);
+    sms->flash = g_new(MemoryRegion, 1);
+
+    cpu = AVR_CPU(cpu_create(machine->cpu_type));
+    cpudev = DEVICE(cpu);
+
+
+    memory_region_init_rom(sms->flash, NULL, "avr.flash", SIZE_FLASH,
+            &error_fatal);
+    memory_region_add_subregion(system_memory, OFFSET_CODE, sms->flash);
+
+    /* following are atmel2560 device */
+    create_unimplemented_device("usart 3", OFFSET_DATA + 0x0130, 0x0007);
+    create_unimplemented_device("timer-counter-16bit 5",
+            OFFSET_DATA + 0x0120, 0x000e);
+    create_unimplemented_device("gpio L", OFFSET_DATA + 0x0109, 0x0003);
+    create_unimplemented_device("gpio K", OFFSET_DATA + 0x0106, 0x0003);
+    create_unimplemented_device("gpio J", OFFSET_DATA + 0x0103, 0x0003);
+    create_unimplemented_device("gpio H", OFFSET_DATA + 0x0100, 0x0003);
+    create_unimplemented_device("usart 2", OFFSET_DATA + 0x00d0, 0x0007);
+    create_unimplemented_device("usart 1", OFFSET_DATA + 0x00c8, 0x0007);
+    create_unimplemented_device("usart 0", OFFSET_DATA + 0x00c0, 0x0007);
+    create_unimplemented_device("twi", OFFSET_DATA + 0x00b8, 0x0006);
+    create_unimplemented_device("timer-counter-async-8bit 2",
+            OFFSET_DATA + 0x00b0, 0x0007);
+    create_unimplemented_device("timer-counter-16bit 4",
+            OFFSET_DATA + 0x00a0, 0x000e);
+    create_unimplemented_device("timer-counter-16bit 3",
+            OFFSET_DATA + 0x0090, 0x000e);
+    create_unimplemented_device("timer-counter-16bit 1",
+            OFFSET_DATA + 0x0080, 0x000e);
+    create_unimplemented_device("ac / adc",
+            OFFSET_DATA + 0x0078, 0x0008);
+    create_unimplemented_device("ext-mem-iface",
+            OFFSET_DATA + 0x0074, 0x0002);
+    create_unimplemented_device("int-controller",
+            OFFSET_DATA + 0x0068, 0x000c);
+    create_unimplemented_device("sys",
+            OFFSET_DATA + 0x0060, 0x0007);
+    create_unimplemented_device("spi",
+            OFFSET_DATA + 0x004c, 0x0003);
+    create_unimplemented_device("ext-mem-iface",
+            OFFSET_DATA + 0x004a, 0x0002);
+    create_unimplemented_device("timer-counter-pwm-8bit 0",
+            OFFSET_DATA + 0x0043, 0x0006);
+    create_unimplemented_device("ext-mem-iface",
+            OFFSET_DATA + 0x003e, 0x0005);
+    create_unimplemented_device("int-controller",
+            OFFSET_DATA + 0x0035, 0x0009);
+    create_unimplemented_device("gpio G", OFFSET_DATA + 0x0032, 0x0003);
+    create_unimplemented_device("gpio F", OFFSET_DATA + 0x002f, 0x0003);
+    create_unimplemented_device("gpio E", OFFSET_DATA + 0x002c, 0x0003);
+    create_unimplemented_device("gpio D", OFFSET_DATA + 0x0029, 0x0003);
+    create_unimplemented_device("gpio C", OFFSET_DATA + 0x0026, 0x0003);
+    create_unimplemented_device("gpio B", OFFSET_DATA + 0x0023, 0x0003);
+    create_unimplemented_device("gpio A", OFFSET_DATA + 0x0020, 0x0003);
+
+    memory_region_allocate_system_memory(
+        sms->ram, NULL, "avr.ram", SIZE_SRAM + SIZE_EXMEM);
+    memory_region_add_subregion(system_memory, OFFSET_DATA + 0x200, sms->ram);
+
+    /* Power Reduction built-in peripheral */
+    sms->prr[0] = AVR_MASK(sysbus_create_simple(TYPE_AVR_MASK,
+                    OFFSET_DATA + PRR0_BASE, NULL));
+    sms->prr[1] = AVR_MASK(sysbus_create_simple(TYPE_AVR_MASK,
+                    OFFSET_DATA + PRR1_BASE, NULL));
+
+    /* USART 0 built-in peripheral */
+    sms->usart0 = AVR_USART(object_new(TYPE_AVR_USART));
+    busdev = SYS_BUS_DEVICE(sms->usart0);
+    qdev_prop_set_chr(DEVICE(sms->usart0), "chardev", serial_hd(0));
+    object_property_set_bool(OBJECT(sms->usart0), true, "realized",
+            &error_fatal);
+    sysbus_mmio_map(busdev, 0, OFFSET_DATA + USART_BASE);
+    /*
+     * These IRQ numbers don't match the datasheet because we're counting from
+     * zero and not including reset.
+     */
+    sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(cpudev, USART_RXC_IRQ));
+    sysbus_connect_irq(busdev, 1, qdev_get_gpio_in(cpudev, USART_DRE_IRQ));
+    sysbus_connect_irq(busdev, 2, qdev_get_gpio_in(cpudev, USART_TXC_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(sms->prr[1]), PRR1_BIT_PRUSART1,
+            qdev_get_gpio_in(DEVICE(sms->usart0), 0));
+
+    /* Timer 1 built-in periphal */
+    sms->timer1 = AVR_TIMER16(object_new(TYPE_AVR_TIMER16));
+    object_property_set_bool(OBJECT(sms->timer1), true, "realized",
+            &error_fatal);
+    busdev = SYS_BUS_DEVICE(sms->timer1);
+    sysbus_mmio_map(busdev, 0, OFFSET_DATA + TIMER1_BASE);
+    sysbus_mmio_map(busdev, 1, OFFSET_DATA + TIMER1_IMSK_BASE);
+    sysbus_mmio_map(busdev, 2, OFFSET_DATA + TIMER1_IFR_BASE);
+    sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(cpudev, TIMER1_CAPT_IRQ));
+    sysbus_connect_irq(busdev, 1, qdev_get_gpio_in(cpudev, TIMER1_COMPA_IRQ));
+    sysbus_connect_irq(busdev, 2, qdev_get_gpio_in(cpudev, TIMER1_COMPB_IRQ));
+    sysbus_connect_irq(busdev, 3, qdev_get_gpio_in(cpudev, TIMER1_COMPC_IRQ));
+    sysbus_connect_irq(busdev, 4, qdev_get_gpio_in(cpudev, TIMER1_OVF_IRQ));
+    sysbus_connect_irq(SYS_BUS_DEVICE(sms->prr[0]), PRR0_BIT_PRTIM1,
+            qdev_get_gpio_in(DEVICE(sms->timer1), 0));
+
+    /* Load firmware (contents of flash) trying to auto-detect format */
+    firmware = machine->firmware;
+    if (firmware != NULL) {
+        filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, firmware);
+        if (filename == NULL) {
+            error_report("Unable to find %s", firmware);
+            exit(1);
+        }
+
+        bytes_loaded = load_elf(
+            filename, NULL, NULL, NULL, NULL, NULL, NULL, 0, EM_NONE, 0, 0);
+        if (bytes_loaded < 0) {
+            bytes_loaded = load_image_targphys(
+                filename, OFFSET_CODE, SIZE_FLASH);
+        }
+        if (bytes_loaded < 0) {
+            error_report(
+                "Unable to load firmware image %s as ELF or raw binary",
+                firmware);
+            exit(1);
+        }
+    }
+}
+
+static void sample_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+
+    mc->desc = "AVR sample/example board (ATmega2560)";
+    mc->init = sample_init;
+    mc->default_cpus = 1;
+    mc->min_cpus = mc->default_cpus;
+    mc->max_cpus = mc->default_cpus;
+    mc->default_cpu_type = "avr6-avr-cpu"; /* ATmega2560. */
+    mc->is_default = 1;
+}
+
+static const TypeInfo sample_info = {
+    .name = TYPE_SAMPLE_MACHINE,
+    .parent = TYPE_MACHINE,
+    .instance_size = sizeof(SampleMachineState),
+    .class_size = sizeof(SampleMachineClass),
+    .class_init = sample_class_init,
+};
+
+static void sample_machine_init(void)
+{
+    type_register_static(&sample_info);
+}
+
+type_init(sample_machine_init);
-- 
2.17.2 (Apple Git-113)




reply via email to

[Prev in Thread] Current Thread [Next in Thread]