qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v7 27/42] hw/pci-host: Declare device little or


From: Philippe Mathieu-Daudé
Subject: Re: [Qemu-devel] [PATCH v7 27/42] hw/pci-host: Declare device little or big endian
Date: Fri, 16 Aug 2019 12:06:02 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.7.0

On 8/16/19 9:35 AM, address@hidden wrote:
> For each device declared with DEVICE_NATIVE_ENDIAN, find the set of
> targets from the set of target/hw/*/device.o.
> 
> If the set of targets are all little or all big endian, re-declare
> the device endianness as DEVICE_LITTLE_ENDIAN or DEVICE_BIG_ENDIAN
> respectively.
> 
> This *naive* deduction may result in genuinely native endian devices
> being incorrectly declared as little or big endian, but should not
> introduce regressions for current targets.
> 
> These devices should be re-declared as DEVICE_NATIVE_ENDIAN if 1) it
> has a new target with an opposite endian or 2) someone informed knows
> better =)
> 
> Signed-off-by: Tony Nguyen <address@hidden>
> ---
>  hw/pci-host/q35.c       | 2 +-
>  hw/pci-host/versatile.c | 4 ++--
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/hw/pci-host/q35.c b/hw/pci-host/q35.c
> index 0a010be..fd20f72 100644
> --- a/hw/pci-host/q35.c
> +++ b/hw/pci-host/q35.c
> @@ -288,7 +288,7 @@ static void tseg_blackhole_write(void *opaque,
> hwaddr addr, uint64_t val,
>  static const MemoryRegionOps tseg_blackhole_ops = {
>      .read = tseg_blackhole_read,
>      .write = tseg_blackhole_write,
> -    .endianness = DEVICE_NATIVE_ENDIAN,
> +    .endianness = DEVICE_LITTLE_ENDIAN,

OK.

>      .valid.min_access_size = 1,
>      .valid.max_access_size = 4,
>      .impl.min_access_size = 4,
> diff --git a/hw/pci-host/versatile.c b/hw/pci-host/versatile.c
> index 791b321..e7017f3 100644
> --- a/hw/pci-host/versatile.c
> +++ b/hw/pci-host/versatile.c
> @@ -240,7 +240,7 @@ static uint64_t pci_vpb_reg_read(void *opaque,
> hwaddr addr,
>  static const MemoryRegionOps pci_vpb_reg_ops = {
>      .read = pci_vpb_reg_read,
>      .write = pci_vpb_reg_write,
> -    .endianness = DEVICE_NATIVE_ENDIAN,
> +    .endianness = DEVICE_LITTLE_ENDIAN,
>      .valid = {
>          .min_access_size = 4,
>          .max_access_size = 4,
> @@ -306,7 +306,7 @@ static uint64_t pci_vpb_config_read(void *opaque,
> hwaddr addr,
>  static const MemoryRegionOps pci_vpb_config_ops = {
>      .read = pci_vpb_config_read,
>      .write = pci_vpb_config_write,
> -    .endianness = DEVICE_NATIVE_ENDIAN,
> +    .endianness = DEVICE_LITTLE_ENDIAN,

Eh hard to say, PCI is not clear about endianess...

>  };
>  
>  static int pci_vpb_map_irq(PCIDevice *d, int irq_num)
> -- 
> 1.8.3.1
> 
>
> 
> 



reply via email to

[Prev in Thread] Current Thread [Next in Thread]