[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v6] e1000: add interrupt mitigation support
From: |
Vincenzo Maffione |
Subject: |
Re: [Qemu-devel] [PATCH v6] e1000: add interrupt mitigation support |
Date: |
Tue, 6 Aug 2013 12:11:46 +0200 |
Thank you guys for your support!
Best regards,
Vincenzo
2013/8/6 Stefan Hajnoczi <address@hidden>:
> On Fri, Aug 02, 2013 at 06:30:52PM +0200, Vincenzo Maffione wrote:
>> This patch partially implements the e1000 interrupt mitigation mechanisms.
>> Using a single QEMUTimer, it emulates the ITR register (which is the newer
>> mitigation register, recommended by Intel) and approximately emulates
>> RADV and TADV registers. TIDV and RDTR register functionalities are not
>> emulated (RDTR is only used to validate RADV, according to the e1000 specs).
>>
>> RADV, TADV, TIDV and RDTR registers make up the older e1000 mitigation
>> mechanism and would need a timer each to be completely emulated. However,
>> a single timer has been used in order to reach a good compromise between
>> emulation accuracy and simplicity/efficiency.
>>
>> The implemented mechanism can be enabled/disabled specifying the command
>> line e1000-specific boolean parameter "mitigation", e.g.
>>
>> qemu-system-x86_64 -device e1000,mitigation=on,... ...
>>
>> For more information, see the Software developer's manual at
>> http://download.intel.com/design/network/manuals/8254x_GBe_SDM.pdf.
>>
>> Interrupt mitigation boosts performance when the guest suffers from
>> an high interrupt rate (i.e. receiving short UDP packets at high packet
>> rate). For some numerical results see the following link
>> http://info.iet.unipi.it/~luigi/papers/20130520-rizzo-vm.pdf
>>
>> Signed-off-by: Vincenzo Maffione <address@hidden>
>> ---
>> Added pc-*-1.7 machines (default machine moved to pc-i440fx-1.7).
>>
>> hw/i386/pc_piix.c | 18 ++++++-
>> hw/i386/pc_q35.c | 16 ++++++-
>> hw/net/e1000.c | 131
>> +++++++++++++++++++++++++++++++++++++++++++++++++--
>> include/hw/i386/pc.h | 8 ++++
>> 4 files changed, 167 insertions(+), 6 deletions(-)
>
> Great, thanks for working with us on the migration details, Vincenzo!
>
> Thanks, applied to my net-next tree:
> https://github.com/stefanha/qemu/commits/net-next
>
> Stefan
--
Vincenzo Maffione