[Qemu-devel] [PATCH 18/18] usb-musb: Add reset function

[Gerd Hoffmann]

From: Juha Riihimäki <address@hidden>

Add a separate reset function musb_reset() to the usb-musb interface,
so that users who implement a reset function can also reset usb-musb.
Use this in tusb6010.

Signed-off-by: Juha Riihimäki <address@hidden>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <address@hidden>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by:  Peter Maydell <address@hidden>
Signed-off-by: Gerd Hoffmann <address@hidden>
---
 hw/tusb6010.c |    1 +
 hw/usb-musb.c |   24 ++++++++++++++++++------
 hw/usb.h      |    1 +
 3 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/hw/tusb6010.c b/hw/tusb6010.c
index 57fe804..ce7c81f 100644
--- a/hw/tusb6010.c
+++ b/hw/tusb6010.c
@@ -771,6 +771,7 @@ static void tusb6010_reset(DeviceState *dev)
     for (i = 0; i < 15; i++) {
         s->rx_config[i] = s->tx_config[i] = 0;
     }
+    musb_reset(s->musb);
 }
 
 static int tusb6010_init(SysBusDevice *dev)
diff --git a/hw/usb-musb.c b/hw/usb-musb.c
index 640037f..01e2e7c 100644
--- a/hw/usb-musb.c
+++ b/hw/usb-musb.c
@@ -340,16 +340,12 @@ struct MUSBState {
     MUSBEndPoint ep[16];
 };
 
-struct MUSBState *musb_init(DeviceState *parent_device, int gpio_base)
+void musb_reset(MUSBState *s)
 {
-    MUSBState *s = g_malloc0(sizeof(*s));
     int i;
 
-    for (i = 0; i < musb_irq_max; i++) {
-        s->irqs[i] = qdev_get_gpio_in(parent_device, gpio_base + i);
-    }
-
     s->faddr = 0x00;
+    s->devctl = 0;
     s->power = MGC_M_POWER_HSENAB;
     s->tx_intr = 0x0000;
     s->rx_intr = 0x0000;
@@ -359,6 +355,10 @@ struct MUSBState *musb_init(DeviceState *parent_device, 
int gpio_base)
     s->mask = 0x06;
     s->idx = 0;
 
+    s->setup_len = 0;
+    s->session = 0;
+    memset(s->buf, 0, sizeof(s->buf));
+
     /* TODO: _DW */
     s->ep[0].config = MGC_M_CONFIGDATA_SOFTCONE | MGC_M_CONFIGDATA_DYNFIFO;
     for (i = 0; i < 16; i ++) {
@@ -370,6 +370,18 @@ struct MUSBState *musb_init(DeviceState *parent_device, 
int gpio_base)
         usb_packet_init(&s->ep[i].packey[0].p);
         usb_packet_init(&s->ep[i].packey[1].p);
     }
+}
+
+struct MUSBState *musb_init(DeviceState *parent_device, int gpio_base)
+{
+    MUSBState *s = g_malloc0(sizeof(*s));
+    int i;
+
+    for (i = 0; i < musb_irq_max; i++) {
+        s->irqs[i] = qdev_get_gpio_in(parent_device, gpio_base + i);
+    }
+
+    musb_reset(s);
 
     usb_bus_new(&s->bus, &musb_bus_ops, parent_device);
     usb_register_port(&s->bus, &s->port, s, 0, &musb_port_ops,
diff --git a/hw/usb.h b/hw/usb.h
index 55c061e..c08d469 100644
--- a/hw/usb.h
+++ b/hw/usb.h
@@ -344,6 +344,7 @@ enum musb_irq_source_e {
 
 typedef struct MUSBState MUSBState;
 MUSBState *musb_init(DeviceState *parent_device, int gpio_base);
+void musb_reset(MUSBState *s);
 uint32_t musb_core_intr_get(MUSBState *s);
 void musb_core_intr_clear(MUSBState *s, uint32_t mask);
 void musb_set_size(MUSBState *s, int epnum, int size, int is_tx);
-- 
1.7.1