[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v3 4/9] qapi/misc: Restrict balloon-related commands to machi
From: |
David Hildenbrand |
Subject: |
Re: [PATCH v3 4/9] qapi/misc: Restrict balloon-related commands to machine code |
Date: |
Tue, 26 May 2020 09:35:28 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.7.0 |
On 25.05.20 17:06, Philippe Mathieu-Daudé wrote:
> Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
> ---
> qapi/machine.json | 90 ++++++++++++++++++++++++++++++++++++++
> qapi/misc.json | 90 --------------------------------------
> include/sysemu/balloon.h | 2 +-
> balloon.c | 2 +-
> hw/virtio/virtio-balloon.c | 2 +-
> monitor/hmp-cmds.c | 1 +
> 6 files changed, 94 insertions(+), 93 deletions(-)
>
> diff --git a/qapi/machine.json b/qapi/machine.json
> index ca7d58f0c9..ae42d69495 100644
> --- a/qapi/machine.json
> +++ b/qapi/machine.json
> @@ -921,3 +921,93 @@
> 'data': 'NumaOptions',
> 'allow-preconfig': true
> }
> +
> +##
> +# @balloon:
> +#
> +# Request the balloon driver to change its balloon size.
> +#
> +# @value: the target logical size of the VM in bytes
> +# We can deduce the size of the balloon using this formula:
> +# logical_vm_size = vm_ram_size - balloon_size
> +# From it we have: balloon_size = vm_ram_size - @value
> +#
> +# Returns: - Nothing on success
> +# - If the balloon driver is enabled but not functional because the
> KVM
> +# kernel module cannot support it, KvmMissingCap
> +# - If no balloon device is present, DeviceNotActive
> +#
> +# Notes: This command just issues a request to the guest. When it returns,
> +# the balloon size may not have changed. A guest can change the
> balloon
> +# size independent of this command.
> +#
> +# Since: 0.14.0
> +#
> +# Example:
> +#
> +# -> { "execute": "balloon", "arguments": { "value": 536870912 } }
> +# <- { "return": {} }
> +#
> +# With a 2.5GiB guest this command inflated the ballon to 3GiB.
> +#
> +##
> +{ 'command': 'balloon', 'data': {'value': 'int'} }
> +
> +##
> +# @BalloonInfo:
> +#
> +# Information about the guest balloon device.
> +#
> +# @actual: the logical size of the VM in bytes
> +# Formula used: logical_vm_size = vm_ram_size - balloon_size
> +#
> +# Since: 0.14.0
> +#
> +##
> +{ 'struct': 'BalloonInfo', 'data': {'actual': 'int' } }
> +
> +##
> +# @query-balloon:
> +#
> +# Return information about the balloon device.
> +#
> +# Returns: - @BalloonInfo on success
> +# - If the balloon driver is enabled but not functional because the
> KVM
> +# kernel module cannot support it, KvmMissingCap
> +# - If no balloon device is present, DeviceNotActive
> +#
> +# Since: 0.14.0
> +#
> +# Example:
> +#
> +# -> { "execute": "query-balloon" }
> +# <- { "return": {
> +# "actual": 1073741824,
> +# }
> +# }
> +#
> +##
> +{ 'command': 'query-balloon', 'returns': 'BalloonInfo' }
> +
> +##
> +# @BALLOON_CHANGE:
> +#
> +# Emitted when the guest changes the actual BALLOON level. This value is
> +# equivalent to the @actual field return by the 'query-balloon' command
> +#
> +# @actual: the logical size of the VM in bytes
> +# Formula used: logical_vm_size = vm_ram_size - balloon_size
> +#
> +# Note: this event is rate-limited.
> +#
> +# Since: 1.2
> +#
> +# Example:
> +#
> +# <- { "event": "BALLOON_CHANGE",
> +# "data": { "actual": 944766976 },
> +# "timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
> +#
> +##
> +{ 'event': 'BALLOON_CHANGE',
> + 'data': { 'actual': 'int' } }
> diff --git a/qapi/misc.json b/qapi/misc.json
> index 446fc8ff83..26b5115638 100644
> --- a/qapi/misc.json
> +++ b/qapi/misc.json
> @@ -186,65 +186,6 @@
> { 'command': 'query-iothreads', 'returns': ['IOThreadInfo'],
> 'allow-preconfig': true }
>
> -##
> -# @BalloonInfo:
> -#
> -# Information about the guest balloon device.
> -#
> -# @actual: the logical size of the VM in bytes
> -# Formula used: logical_vm_size = vm_ram_size - balloon_size
> -#
> -# Since: 0.14.0
> -#
> -##
> -{ 'struct': 'BalloonInfo', 'data': {'actual': 'int' } }
> -
> -##
> -# @query-balloon:
> -#
> -# Return information about the balloon device.
> -#
> -# Returns: - @BalloonInfo on success
> -# - If the balloon driver is enabled but not functional because the
> KVM
> -# kernel module cannot support it, KvmMissingCap
> -# - If no balloon device is present, DeviceNotActive
> -#
> -# Since: 0.14.0
> -#
> -# Example:
> -#
> -# -> { "execute": "query-balloon" }
> -# <- { "return": {
> -# "actual": 1073741824,
> -# }
> -# }
> -#
> -##
> -{ 'command': 'query-balloon', 'returns': 'BalloonInfo' }
> -
> -##
> -# @BALLOON_CHANGE:
> -#
> -# Emitted when the guest changes the actual BALLOON level. This value is
> -# equivalent to the @actual field return by the 'query-balloon' command
> -#
> -# @actual: the logical size of the VM in bytes
> -# Formula used: logical_vm_size = vm_ram_size - balloon_size
> -#
> -# Note: this event is rate-limited.
> -#
> -# Since: 1.2
> -#
> -# Example:
> -#
> -# <- { "event": "BALLOON_CHANGE",
> -# "data": { "actual": 944766976 },
> -# "timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
> -#
> -##
> -{ 'event': 'BALLOON_CHANGE',
> - 'data': { 'actual': 'int' } }
> -
> ##
> # @PciMemoryRange:
> #
> @@ -753,37 +694,6 @@
> ##
> { 'command': 'inject-nmi' }
>
> -##
> -# @balloon:
> -#
> -# Request the balloon driver to change its balloon size.
> -#
> -# @value: the target logical size of the VM in bytes
> -# We can deduce the size of the balloon using this formula:
> -# logical_vm_size = vm_ram_size - balloon_size
> -# From it we have: balloon_size = vm_ram_size - @value
> -#
> -# Returns: - Nothing on success
> -# - If the balloon driver is enabled but not functional because the
> KVM
> -# kernel module cannot support it, KvmMissingCap
> -# - If no balloon device is present, DeviceNotActive
> -#
> -# Notes: This command just issues a request to the guest. When it returns,
> -# the balloon size may not have changed. A guest can change the
> balloon
> -# size independent of this command.
> -#
> -# Since: 0.14.0
> -#
> -# Example:
> -#
> -# -> { "execute": "balloon", "arguments": { "value": 536870912 } }
> -# <- { "return": {} }
> -#
> -# With a 2.5GiB guest this command inflated the ballon to 3GiB.
> -#
> -##
> -{ 'command': 'balloon', 'data': {'value': 'int'} }
> -
> ##
> # @human-monitor-command:
> #
> diff --git a/include/sysemu/balloon.h b/include/sysemu/balloon.h
> index aea0c44985..b3de4b92b9 100644
> --- a/include/sysemu/balloon.h
> +++ b/include/sysemu/balloon.h
> @@ -15,7 +15,7 @@
> #define QEMU_BALLOON_H
>
> #include "exec/cpu-common.h"
> -#include "qapi/qapi-types-misc.h"
> +#include "qapi/qapi-types-machine.h"
>
> typedef void (QEMUBalloonEvent)(void *opaque, ram_addr_t target);
> typedef void (QEMUBalloonStatus)(void *opaque, BalloonInfo *info);
> diff --git a/balloon.c b/balloon.c
> index f104b42961..ee9c59252d 100644
> --- a/balloon.c
> +++ b/balloon.c
> @@ -30,7 +30,7 @@
> #include "sysemu/balloon.h"
> #include "trace-root.h"
> #include "qapi/error.h"
> -#include "qapi/qapi-commands-misc.h"
> +#include "qapi/qapi-commands-machine.h"
> #include "qapi/qmp/qerror.h"
>
> static QEMUBalloonEvent *balloon_event_fn;
> diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c
> index 065cd450f1..ec3aac1e80 100644
> --- a/hw/virtio/virtio-balloon.c
> +++ b/hw/virtio/virtio-balloon.c
> @@ -24,7 +24,7 @@
> #include "hw/virtio/virtio-balloon.h"
> #include "exec/address-spaces.h"
> #include "qapi/error.h"
> -#include "qapi/qapi-events-misc.h"
> +#include "qapi/qapi-events-machine.h"
> #include "qapi/visitor.h"
> #include "trace.h"
> #include "qemu/error-report.h"
> diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
> index 9c61e769ca..376590c073 100644
> --- a/monitor/hmp-cmds.c
> +++ b/monitor/hmp-cmds.c
> @@ -32,6 +32,7 @@
> #include "qapi/qapi-commands-block.h"
> #include "qapi/qapi-commands-char.h"
> #include "qapi/qapi-commands-control.h"
> +#include "qapi/qapi-commands-machine.h"
> #include "qapi/qapi-commands-migration.h"
> #include "qapi/qapi-commands-misc.h"
> #include "qapi/qapi-commands-net.h"
>
Reviewed-by: David Hildenbrand <address@hidden>
I yet have to craft a patch to fixup the wrong documentation :)
--
Thanks,
David / dhildenb
- [PATCH v3 1/9] target/i386: Restrict X86CPUFeatureWord to X86 targets, (continued)
[PATCH v3 2/9] qapi/misc: Restrict LostTickPolicy enum to machine code, Philippe Mathieu-Daudé, 2020/05/25
[PATCH v3 3/9] qapi/misc.json: Correct balloon documentation, Philippe Mathieu-Daudé, 2020/05/25
[PATCH v3 4/9] qapi/misc: Restrict balloon-related commands to machine code, Philippe Mathieu-Daudé, 2020/05/25
- Re: [PATCH v3 4/9] qapi/misc: Restrict balloon-related commands to machine code,
David Hildenbrand <=
- Re: [PATCH v3 4/9] qapi/misc: Restrict balloon-related commands to machine code, Markus Armbruster, 2020/05/26
- Re: [PATCH v3 4/9] qapi/misc: Restrict balloon-related commands to machine code, Philippe Mathieu-Daudé, 2020/05/26
- Re: [PATCH v3 4/9] qapi/misc: Restrict balloon-related commands to machine code, Markus Armbruster, 2020/05/26
- Re: [PATCH v3 4/9] qapi/misc: Restrict balloon-related commands to machine code, Philippe Mathieu-Daudé, 2020/05/26
- Re: [PATCH v3 4/9] qapi/misc: Restrict balloon-related commands to machine code, Philippe Mathieu-Daudé, 2020/05/26
- Re: [PATCH v3 4/9] qapi/misc: Restrict balloon-related commands to machine code, Markus Armbruster, 2020/05/27
- Re: [PATCH v3 4/9] qapi/misc: Restrict balloon-related commands to machine code, Philippe Mathieu-Daudé, 2020/05/27
[PATCH v3 5/9] qapi/misc: Restrict query-vm-generation-id command to machine code, Philippe Mathieu-Daudé, 2020/05/25