[PATCH 4/5] hw/intc/arm_gicv3: Use correct number of priority bits for the CPU

[Peter Maydell]

Make the GICv3 set its number of bits of physical priority from the
implementation-specific value provided in the CPU state struct, in
the same way we already do for virtual priority bits.  Because this
would be a migration compatibility break, we provide a property
force-8-bit-prio which is enabled for 7.0 and earlier versioned board
models to retain the legacy "always use 8 bits" behaviour.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
I have guessed at the right value for the A64FX, but if we can
find the correct ICC_CTLR_EL1 value that would be better.
---
 include/hw/intc/arm_gicv3_common.h |  1 +
 target/arm/cpu.h                   |  1 +
 hw/core/machine.c                  |  4 +++-
 hw/intc/arm_gicv3_common.c         |  5 +++++
 hw/intc/arm_gicv3_cpuif.c          | 14 ++++++++++----
 target/arm/cpu64.c                 |  9 +++++++++
 6 files changed, 29 insertions(+), 5 deletions(-)

diff --git a/include/hw/intc/arm_gicv3_common.h 
b/include/hw/intc/arm_gicv3_common.h
index 46677ec345c..ab5182a28a2 100644
--- a/include/hw/intc/arm_gicv3_common.h
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -248,6 +248,7 @@ struct GICv3State {
     uint32_t revision;
     bool lpi_enable;
     bool security_extn;
+    bool force_8bit_prio;
     bool irq_reset_nonsecure;
     bool gicd_no_migration_shift_bug;
 
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index ca01f909a86..f8873bdbb97 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -993,6 +993,7 @@ struct ArchCPU {
     int gic_num_lrs; /* number of list registers */
     int gic_vpribits; /* number of virtual priority bits */
     int gic_vprebits; /* number of virtual preemption bits */
+    int gic_pribits; /* number of physical priority bits */
 
     /* Whether the cfgend input is high (i.e. this CPU should reset into
      * big-endian mode).  This setting isn't used directly: instead it modifies
diff --git a/hw/core/machine.c b/hw/core/machine.c
index cb9bbc844d2..db012376785 100644
--- a/hw/core/machine.c
+++ b/hw/core/machine.c
@@ -37,7 +37,9 @@
 #include "hw/virtio/virtio.h"
 #include "hw/virtio/virtio-pci.h"
 
-GlobalProperty hw_compat_7_0[] = {};
+GlobalProperty hw_compat_7_0[] = {
+    { "arm-gicv3-common", "force-8-bit-prio", "on" },
+};
 const size_t hw_compat_7_0_len = G_N_ELEMENTS(hw_compat_7_0);
 
 GlobalProperty hw_compat_6_2[] = {
diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
index 5634c6fc788..351843db4aa 100644
--- a/hw/intc/arm_gicv3_common.c
+++ b/hw/intc/arm_gicv3_common.c
@@ -563,6 +563,11 @@ static Property arm_gicv3_common_properties[] = {
     DEFINE_PROP_UINT32("revision", GICv3State, revision, 3),
     DEFINE_PROP_BOOL("has-lpi", GICv3State, lpi_enable, 0),
     DEFINE_PROP_BOOL("has-security-extensions", GICv3State, security_extn, 0),
+    /*
+     * Compatibility property: force 8 bits of physical priority, even
+     * if the CPU being emulated should have fewer.
+     */
+    DEFINE_PROP_BOOL("force-8-bit-prio", GICv3State, force_8bit_prio, 0),
     DEFINE_PROP_ARRAY("redist-region-count", GICv3State, nb_redist_regions,
                       redist_region_count, qdev_prop_uint32, uint32_t),
     DEFINE_PROP_LINK("sysmem", GICv3State, dma, TYPE_MEMORY_REGION,
diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c
index 8499a49be39..e277a807bd5 100644
--- a/hw/intc/arm_gicv3_cpuif.c
+++ b/hw/intc/arm_gicv3_cpuif.c
@@ -2801,11 +2801,17 @@ void gicv3_init_cpuif(GICv3State *s)
         define_arm_cp_regs(cpu, gicv3_cpuif_reginfo);
 
         /*
-         * For the moment, retain the existing behaviour of 8 priority bits;
-         * in a following commit we will take this from the CPU state,
-         * as we do for the virtual priority bits.
+         * The CPU implementation specifies the number of supported
+         * bits of physical priority. For backwards compatibility
+         * of migration, we have a compat property that forces use
+         * of 8 priority bits regardless of what the CPU really has.
          */
-        cs->pribits = 8;
+        if (s->force_8bit_prio) {
+            cs->pribits = 8;
+        } else {
+            cs->pribits = cpu->gic_pribits;
+        }
+
         /*
          * The GICv3 has separate ID register fields for virtual priority
          * and preemption bit values, but only a single ID register field
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index c841d55d0e9..490231b90f3 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -143,6 +143,7 @@ static void aarch64_a57_initfn(Object *obj)
     cpu->gic_num_lrs = 4;
     cpu->gic_vpribits = 5;
     cpu->gic_vprebits = 5;
+    cpu->gic_pribits = 5;
     define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo);
 }
 
@@ -196,6 +197,7 @@ static void aarch64_a53_initfn(Object *obj)
     cpu->gic_num_lrs = 4;
     cpu->gic_vpribits = 5;
     cpu->gic_vprebits = 5;
+    cpu->gic_pribits = 5;
     define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo);
 }
 
@@ -247,6 +249,7 @@ static void aarch64_a72_initfn(Object *obj)
     cpu->gic_num_lrs = 4;
     cpu->gic_vpribits = 5;
     cpu->gic_vprebits = 5;
+    cpu->gic_pribits = 5;
     define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo);
 }
 
@@ -961,6 +964,12 @@ static void aarch64_a64fx_initfn(Object *obj)
     cpu->gic_num_lrs = 4;
     cpu->gic_vpribits = 5;
     cpu->gic_vprebits = 5;
+    /*
+     * TODO: What does the real A64FX GICv3 provide ?
+     * This is a guess based on what other Arm CPUs do; to find the correct
+     * answer we need the value of the A64FX's ICC_CTLR_EL1 register.
+     */
+    cpu->gic_pribits = 5;
 
     /* Suppport of A64FX's vector length are 128,256 and 512bit only */
     aarch64_add_sve_properties(obj);
-- 
2.25.1