[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2 07/13] hw/arm/bcm2836: QOM'ify more by adding class_init()
From: |
Igor Mammedov |
Subject: |
Re: [PATCH v2 07/13] hw/arm/bcm2836: QOM'ify more by adding class_init() to each SoC type |
Date: |
Wed, 19 Feb 2020 18:28:45 +0100 |
On Tue, 18 Feb 2020 18:39:49 +0100
Philippe Mathieu-Daudé <address@hidden> wrote:
> On 2/18/20 6:04 PM, Igor Mammedov wrote:
> > On Mon, 17 Feb 2020 12:45:27 +0100
> > Philippe Mathieu-Daudé <address@hidden> wrote:
> >
> >> Remove usage of TypeInfo::class_data. Instead fill the fields in
> >> the corresponding class_init().
> >>
> >> Cc: Igor Mammedov <address@hidden>
> >> Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
> >> ---
> >> hw/arm/bcm2836.c | 109 ++++++++++++++++++++++-------------------------
> >> 1 file changed, 51 insertions(+), 58 deletions(-)
> >>
> >> diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
> >> index 24109fef1d..683d04d6ea 100644
> >> --- a/hw/arm/bcm2836.c
> >> +++ b/hw/arm/bcm2836.c
> >> @@ -16,57 +16,30 @@
> >> #include "hw/arm/raspi_platform.h"
> >> #include "hw/sysbus.h"
> >>
> >> -typedef struct BCM283XInfo BCM283XInfo;
> >> -
> >> typedef struct BCM283XClass {
> >> /*< private >*/
> >> DeviceClass parent_class;
> >> /*< public >*/
> >> - const BCM283XInfo *info;
> >> -} BCM283XClass;
> >> -
> >> -struct BCM283XInfo {
> >> - const char *name;
> >
> >> const char *cpu_type;
> >
> > probably could be cleaned up by using
> > machine->cpu_type/machine_class->default_cpu_type
> > (no need to change this patch as it's separate issue)
>
> Hmm the core_type is tied to the SoC, not to the machine. The machine
> only selects a SoC and gets the cpu cores that come with it. The problem
> is QEMU does not provide interface to select SoC from cmdline, only CPU.
>
> >
> >
> >> hwaddr peri_base; /* Peripheral base address seen by the CPU */
> >> hwaddr ctrl_base; /* Interrupt controller and mailboxes etc. */
> >> int clusterid;
> >> -};
> >> +} BCM283XClass;
> >>
> >> #define BCM283X_CLASS(klass) \
> >> OBJECT_CLASS_CHECK(BCM283XClass, (klass), TYPE_BCM283X)
> >> #define BCM283X_GET_CLASS(obj) \
> >> OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X)
> >>
> >> -static const BCM283XInfo bcm283x_socs[] = {
> >> - {
> >> - .name = TYPE_BCM2836,
> >> - .cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"),
> >> - .peri_base = 0x3f000000,
> >> - .ctrl_base = 0x40000000,
> >> - .clusterid = 0xf,
> >> - },
> >> -#ifdef TARGET_AARCH64
> >> - {
> >> - .name = TYPE_BCM2837,
> >> - .cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"),
> >> - .peri_base = 0x3f000000,
> >> - .ctrl_base = 0x40000000,
> >> - .clusterid = 0x0,
> >> - },
> >> -#endif
> >> -};
> >> -
> >> static void bcm2836_init(Object *obj)
> >> {
> >> BCM283XState *s = BCM283X(obj);
> >> BCM283XClass *bc = BCM283X_GET_CLASS(obj);
> >> - const BCM283XInfo *info = bc->info;
> >> int n;
> >>
> >> for (n = 0; n < BCM283X_NCPUS; n++) {
> >> object_initialize_child(obj, "cpu[*]", &s->cpu[n].core,
> >> - sizeof(s->cpu[n].core), info->cpu_type,
> >> + sizeof(s->cpu[n].core), bc->cpu_type,
> >> &error_abort, NULL);
> >> }
> >>
> >> @@ -85,7 +58,6 @@ static void bcm2836_realize(DeviceState *dev, Error
> >> **errp)
> >> {
> >> BCM283XState *s = BCM283X(dev);
> >> BCM283XClass *bc = BCM283X_GET_CLASS(dev);
> >> - const BCM283XInfo *info = bc->info;
> >> Object *obj;
> >> Error *err = NULL;
> >> int n;
> >> @@ -119,7 +91,7 @@ static void bcm2836_realize(DeviceState *dev, Error
> >> **errp)
> >> }
> >>
> >> sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->peripherals), 0,
> >> - info->peri_base, 1);
> >> + bc->peri_base, 1);
> >>
> >> /* bcm2836 interrupt controller (and mailboxes, etc.) */
> >> object_property_set_bool(OBJECT(&s->control), true, "realized",
> >> &err);
> >> @@ -128,7 +100,7 @@ static void bcm2836_realize(DeviceState *dev, Error
> >> **errp)
> >> return;
> >> }
> >>
> >> - sysbus_mmio_map(SYS_BUS_DEVICE(&s->control), 0, info->ctrl_base);
> >> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->control), 0, bc->ctrl_base);
> >>
> >> sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 0,
> >> qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-irq", 0));
> >> @@ -137,11 +109,11 @@ static void bcm2836_realize(DeviceState *dev, Error
> >> **errp)
> >>
> >> for (n = 0; n < BCM283X_NCPUS; n++) {
> >> /* TODO: this should be converted to a property of ARM_CPU */
> >> - s->cpu[n].core.mp_affinity = (info->clusterid << 8) | n;
> >> + s->cpu[n].core.mp_affinity = (bc->clusterid << 8) | n;
> >>
> >> /* set periphbase/CBAR value for CPU-local registers */
> >> object_property_set_int(OBJECT(&s->cpu[n].core),
> >> - info->peri_base,
> >> + bc->peri_base,
> >> "reset-cbar", &err);
> >> if (err) {
> >> error_propagate(errp, err);
> >> @@ -190,38 +162,59 @@ static Property bcm2836_props[] = {
> >> static void bcm283x_class_init(ObjectClass *oc, void *data)
> >> {
> >> DeviceClass *dc = DEVICE_CLASS(oc);
> >> - BCM283XClass *bc = BCM283X_CLASS(oc);
> >>
> >> - bc->info = data;
> >> - dc->realize = bcm2836_realize;
> >> - device_class_set_props(dc, bcm2836_props);
> >> /* Reason: Must be wired up in code (see raspi_init() function) */
> >> dc->user_creatable = false;
> >> }
> >>
> >> -static const TypeInfo bcm283x_type_info = {
> >> - .name = TYPE_BCM283X,
> >> - .parent = TYPE_DEVICE,
> >> - .instance_size = sizeof(BCM283XState),
> >> - .instance_init = bcm2836_init,
> >> - .class_size = sizeof(BCM283XClass),
> >> - .abstract = true,
> >> +static void bcm2836_class_init(ObjectClass *oc, void *data)
> >> +{
> >> + DeviceClass *dc = DEVICE_CLASS(oc);
> >> + BCM283XClass *bc = BCM283X_CLASS(oc);
> >> +
> >> + bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a7");
> >> + bc->peri_base = 0x3f000000;
> >> + bc->ctrl_base = 0x40000000;
> >> + bc->clusterid = 0xf;
> >> + dc->realize = bcm2836_realize;
> >> + device_class_set_props(dc, bcm2836_props);
> >> };
> >>
> >> -static void bcm2836_register_types(void)
> >> +#ifdef TARGET_AARCH64
> >> +static void bcm2837_class_init(ObjectClass *oc, void *data)
> >> {
> >> - int i;
> >> + DeviceClass *dc = DEVICE_CLASS(oc);
> >> + BCM283XClass *bc = BCM283X_CLASS(oc);
> >>
> >> - type_register_static(&bcm283x_type_info);
> >> - for (i = 0; i < ARRAY_SIZE(bcm283x_socs); i++) {
> >> - TypeInfo ti = {
> >> - .name = bcm283x_socs[i].name,
> >> - .parent = TYPE_BCM283X,
> >> - .class_init = bcm283x_class_init,
> >> - .class_data = (void *) &bcm283x_socs[i],
> >> - };
> >> - type_register(&ti);
> >> + bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a53");
> >> + bc->peri_base = 0x3f000000;
> >> + bc->ctrl_base = 0x40000000;
> >> + bc->clusterid = 0x0;
> >> + dc->realize = bcm2836_realize;
> >> + device_class_set_props(dc, bcm2836_props);
> > both children do use the same values for almost all fields.
> > I'd set in children class_init()s only cpu_type/clusterid
> > and keep common bits in base class.
>
> Yes so far, but then the BCM2711/BCM2838 for raspi4 changes all fields.
I this case, maybe add this as justification to commit message.
With that change
Reviewed-by: Igor Mammedov <address@hidden>
>
> >
> >> +};
> >> +#endif
> >> +
> >> +static const TypeInfo bcm283x_types[] = {
> >> + {
> >> + .name = TYPE_BCM2836,
> >> + .parent = TYPE_BCM283X,
> >> + .class_init = bcm2836_class_init,
> >> +#ifdef TARGET_AARCH64
> >> + }, {
> >> + .name = TYPE_BCM2837,
> >> + .parent = TYPE_BCM283X,
> >> + .class_init = bcm2837_class_init,
> >> +#endif
> >> + }, {
> >> + .name = TYPE_BCM283X,
> >> + .parent = TYPE_DEVICE,
> >> + .instance_size = sizeof(BCM283XState),
> >> + .instance_init = bcm2836_init,
> >> + .class_size = sizeof(BCM283XClass),
> >> + .class_init = bcm283x_class_init,
> >> + .abstract = true,
> >> }
> >> -}
> >> +};
> >>
> >> -type_init(bcm2836_register_types)
> >> +DEFINE_TYPES(bcm283x_types)
> >
>