[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-arm] [PATCH 07/10] hw/sd/pxa2xx_mmci: convert to SysBusDevice
From: |
Peter Crosthwaite |
Subject: |
Re: [Qemu-arm] [PATCH 07/10] hw/sd/pxa2xx_mmci: convert to SysBusDevice object |
Date: |
Sat, 19 Dec 2015 13:41:40 -0800 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
On Fri, Dec 11, 2015 at 04:37:08PM +0000, Peter Maydell wrote:
> Convert the pxa2xx_mmci device to be a sysbus device.
>
> In this commit we only change the device itself, and leave
> the interface to the SD card using the old non-SDBus APIs.
>
> Signed-off-by: Peter Maydell <address@hidden>
> ---
> hw/sd/pxa2xx_mmci.c | 73
> ++++++++++++++++++++++++++++++++++++++++-------------
> 1 file changed, 55 insertions(+), 18 deletions(-)
>
> diff --git a/hw/sd/pxa2xx_mmci.c b/hw/sd/pxa2xx_mmci.c
> index b217080..b6bb390 100644
> --- a/hw/sd/pxa2xx_mmci.c
> +++ b/hw/sd/pxa2xx_mmci.c
> @@ -11,16 +11,24 @@
> */
>
> #include "hw/hw.h"
> +#include "hw/sysbus.h"
> #include "hw/arm/pxa.h"
> #include "hw/sd/sd.h"
> #include "hw/qdev.h"
> +#include "hw/qdev-properties.h"
> +
> +#define TYPE_PXA2XX_MMCI "pxa2xx-mmci"
> +#define PXA2XX_MMCI(obj) OBJECT_CHECK(PXA2xxMMCIState, (obj),
> TYPE_PXA2XX_MMCI)
> +
> +typedef struct PXA2xxMMCIState {
> + SysBusDevice parent_obj;
>
> -struct PXA2xxMMCIState {
> MemoryRegion iomem;
> qemu_irq irq;
> qemu_irq rx_dma;
> qemu_irq tx_dma;
>
> + BlockBackend *blk;
> SDState *card;
>
> uint32_t status;
> @@ -48,7 +56,7 @@ struct PXA2xxMMCIState {
> int resp_len;
>
> int cmdreq;
> -};
> +} PXA2xxMMCIState;
>
> #define MMC_STRPCL 0x00 /* MMC Clock Start/Stop register */
> #define MMC_STAT 0x04 /* MMC Status register */
> @@ -474,31 +482,60 @@ PXA2xxMMCIState *pxa2xx_mmci_init(MemoryRegion *sysmem,
> BlockBackend *blk, qemu_irq irq,
> qemu_irq rx_dma, qemu_irq tx_dma)
> {
> + DeviceState *dev;
> + SysBusDevice *sbd;
> PXA2xxMMCIState *s;
>
> - s = (PXA2xxMMCIState *) g_malloc0(sizeof(PXA2xxMMCIState));
> - s->irq = irq;
> - s->rx_dma = rx_dma;
> - s->tx_dma = tx_dma;
> -
> - memory_region_init_io(&s->iomem, NULL, &pxa2xx_mmci_ops, s,
> - "pxa2xx-mmci", 0x00100000);
> - memory_region_add_subregion(sysmem, base, &s->iomem);
> -
> - /* Instantiate the actual storage */
> - s->card = sd_init(blk, false);
> + dev = qdev_create(NULL, TYPE_PXA2XX_MMCI);
> + s = PXA2XX_MMCI(dev);
> + /* Reach into the device and initialize the SD card. This is
> + * unclean but will vanish when we update to SDBus APIs.
> + */
> + s->card = sd_init(s->blk, false);
> if (s->card == NULL) {
> exit(1);
> }
> -
> - register_savevm(NULL, "pxa2xx_mmci", 0, 0,
> - pxa2xx_mmci_save, pxa2xx_mmci_load, s);
> -
> + qdev_init_nofail(dev);
> + sbd = SYS_BUS_DEVICE(dev);
> + sysbus_mmio_map(sbd, 0, base);
> + sysbus_connect_irq(sbd, 0, irq);
> + sysbus_connect_irq(sbd, 1, rx_dma);
> + sysbus_connect_irq(sbd, 2, tx_dma);
This looks like heterogenous GPIOs so should be separate named GPIO
sets. Looking at the machine model, the irq goes to the "pic" but the
DMA signals go to a different IP. I would leave the IRQ as the one and
only sysbus IRQ, but implement the two DMAs as named GPIOs.
Otherwise,
Reviewed-by: Peter Crosthwaite <address@hidden>
Regards,
Peter
> return s;
> }
>
> void pxa2xx_mmci_handlers(PXA2xxMMCIState *s, qemu_irq readonly,
> - qemu_irq coverswitch)
> + qemu_irq coverswitch)
> {
> sd_set_cb(s->card, readonly, coverswitch);
> }
> +
> +static void pxa2xx_mmci_instance_init(Object *obj)
> +{
> + PXA2xxMMCIState *s = PXA2XX_MMCI(obj);
> + SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
> +
> + memory_region_init_io(&s->iomem, obj, &pxa2xx_mmci_ops, s,
> + "pxa2xx-mmci", 0x00100000);
> + sysbus_init_mmio(sbd, &s->iomem);
> + sysbus_init_irq(sbd, &s->irq);
> + sysbus_init_irq(sbd, &s->rx_dma);
> + sysbus_init_irq(sbd, &s->tx_dma);
> +
> + register_savevm(NULL, "pxa2xx_mmci", 0, 0,
> + pxa2xx_mmci_save, pxa2xx_mmci_load, s);
> +}
> +
> +static const TypeInfo pxa2xx_mmci_info = {
> + .name = TYPE_PXA2XX_MMCI,
> + .parent = TYPE_SYS_BUS_DEVICE,
> + .instance_size = sizeof(PXA2xxMMCIState),
> + .instance_init = pxa2xx_mmci_instance_init,
> +};
> +
> +static void pxa2xx_mmci_register_types(void)
> +{
> + type_register_static(&pxa2xx_mmci_info);
> +}
> +
> +type_init(pxa2xx_mmci_register_types)
> --
> 1.9.1
>
- [Qemu-arm] [PATCH 04/10] hw/sd: Add QOM bus which SD cards plug in to, (continued)
- [Qemu-arm] [PATCH 04/10] hw/sd: Add QOM bus which SD cards plug in to, Peter Maydell, 2015/12/11
- [Qemu-arm] [PATCH 03/10] hw/sd/sd.c: Convert sd_reset() function into Device reset method, Peter Maydell, 2015/12/11
- [Qemu-arm] [PATCH 07/10] hw/sd/pxa2xx_mmci: convert to SysBusDevice object, Peter Maydell, 2015/12/11
- Re: [Qemu-arm] [PATCH 07/10] hw/sd/pxa2xx_mmci: convert to SysBusDevice object,
Peter Crosthwaite <=
- [Qemu-arm] [PATCH 09/10] hw/sd/pxa2xx_mmci: Convert to VMStateDescription, Peter Maydell, 2015/12/11
- [Qemu-arm] [PATCH 05/10] hw/sd/sdhci.c: Update to use SDBus APIs, Peter Maydell, 2015/12/11
- [Qemu-arm] [PATCH 10/10] hw/sd/pxa2xx_mmci: Add reset function, Peter Maydell, 2015/12/11