Re: [Paparazzi-devel] Could not find STM32 device

[Piotr Esden-Tempski]

Just to make sure this is the output I am getting connecting a Lisa/M:

$ sudo lsusb -v
[snip]
Bus 003 Device 002: ID 1d50:600f OpenMoko, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1d50 OpenMoko, Inc.
idProduct 0x600f
bcdDevice 1.00
iManufacturer 1 1 BIT SQUARED
iProduct 2 Lisa/M V2.1 (Upgrade) V1.1
iSerial 3 LM21005 35FFDC053256383336622143
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 27
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 1 Device Firmware Update
bInterfaceProtocol 2
iInterface 4 @Internal Flash /0x08000000/4*002Ka,124*002Kg
Device Firmware Upgrade Interface Descriptor:
bLength 9
bDescriptorType 33
bmAttributes 9
Will Detach
Manifestation Intolerant
Upload Unsupported
Download Supported
wDetachTimeout 255 milliseconds
wTransferSize 2048 bytes
bcdDFUVersion 1.1a
Device Status: 0x0000
(Bus Powered)
[snip]

OpenMoko is correct. We are using the free device IDs generously 
provided by OpenMoko.

Cheers,
Piotr

On 07/25/2014 12:47 PM, John Voegeli wrote:
> Yes Felix I sure do. I originally has a bad cable causing it not to 
> power correctly, but since then it does the cylon flashing pattern 
> when plugged in USB.
>
>
> Sent from my iPhone
>
> On Jul 25, 2014, at 15:42, "Felix Ruess" <address@hidden 
> <mailto:address@hidden>> wrote:
>
> > Hi,
> >
> > the board does not seem to be in bootloader mode, it should show up 
> > as Lisa/M
> > Do you see the LEDs flashing like this 
> > https://wiki.paparazziuav.org/wiki/Lisa/M_v2.0#Using_luftboot ?
> >
> > Cheers, Felix
> >
> >
> > On Fri, Jul 25, 2014 at 5:52 PM, John Voegeli <address@hidden 
> > <mailto:address@hidden>> wrote:
> >
> >     Does not work with sudo either. Tried that last night I thought
> >     maybe a permissions issues as well. It just says it cannot find it.
> >
> >     From: AFISH <address@hidden
> >     <mailto:address@hidden>>
> >     Reply-To: Paparazzi UAV devel list <address@hidden
> >     <mailto:address@hidden>>
> >     Date: Friday, July 25, 2014 at 11:47 AM
> >     To: Paparazzi UAV devel list <address@hidden
> >     <mailto:address@hidden>>
> >     Cc: Paparazzi UAV devel list <address@hidden
> >     <mailto:address@hidden>>
> >
> >     Subject: Re: [Paparazzi-devel] Could not find STM32 device
> >
> >     Try to run sudo ./paparazzi, if you get link established, it will
> >     shows you need add to some group
> >     —
> >     Sent from Mailbox <https://www.dropbox.com/mailbox> for iPhone
> >
> >
> >     On Fri, Jul 25, 2014 at 10:16 AM, John Voegeli
> >     <address@hidden <mailto:address@hidden>> wrote:
> >
> >         Yes I have permission I followed those steps... Here is the
> >         output for the device that shows up when plugging in the Lisa
> >         M to USB.
> >
> >         Bus 002 Device 003: ID 1d50:600f OpenMoko, Inc.
> >         Couldn't open device, some information will be missing
> >         Device Descriptor:
> >         bLength 18
> >         bDescriptorType 1
> >         bcdUSB 2.00
> >         bDeviceClass 0 (Defined at Interface level)
> >         bDeviceSubClass 0
> >         bDeviceProtocol 0
> >         bMaxPacketSize0 64
> >         idVendor 0x1d50 OpenMoko, Inc.
> >         idProduct 0x600f
> >         bcdDevice 1.00
> >         iManufacturer 1
> >         iProduct 2
> >         iSerial 3
> >         bNumConfigurations 1
> >         Configuration Descriptor:
> >         bLength 9
> >         bDescriptorType 2
> >         wTotalLength 27
> >         bNumInterfaces 1
> >         bConfigurationValue 1
> >         iConfiguration 0
> >         bmAttributes 0xc0
> >         Self Powered
> >         MaxPower 100mA
> >         Interface Descriptor:
> >         bLength 9
> >         bDescriptorType 4
> >         bInterfaceNumber 0
> >         bAlternateSetting 0
> >         bNumEndpoints 0
> >         bInterfaceClass 254 Application Specific Interface
> >         bInterfaceSubClass 1 Device Firmware Update
> >         bInterfaceProtocol 2
> >         iInterface 4
> >         Device Firmware Upgrade Interface Descriptor:
> >         bLength 9
> >         bDescriptorType 33
> >         bmAttributes 9
> >         Will Detach
> >         Manifestation Intolerant
> >         Upload Unsupported
> >         Download Supported
> >         wDetachTimeout 255 milliseconds
> >         wTransferSize 2048 bytes
> >         bcdDFUVersion 1.1a
> >
> >
> >         ________________________________________
> >         From:
> >         address@hidden
> >         <mailto:address@hidden>
> >         <address@hidden
> >         <mailto:address@hidden>>
> >         on behalf of Piotr Esden-Tempski <address@hidden
> >         <mailto:address@hidden>>
> >         Sent: Friday, July 25, 2014 3:18 AM
> >         To: Paparazzi UAV devel list
> >         Subject: Re: [Paparazzi-devel] Could not find STM32 device
> >
> >         Hi John,
> >
> >         Do you have permissions to access the DFU device?
> >
> >         http://wiki.paparazziuav.org/wiki/Installation/Linux#Udev_rules
> >
> >         If you run lsusb -v is the Lisa/M listed?
> >
> >         Cheers,
> >         Piotr
> >
> >         On Jul 24, 2014, at 20:57, John Voegeli
> >         <address@hidden <mailto:address@hidden>> wrote:
> >
> >         > Hey all,
> >         >
> >         > Sorry if this has been answered before. I googled and
> >         searched all over the site and could not find anything. I
> >         have the new Lisa M 2.1 and I am trying to flash it however I
> >         keep getting Could not find STM32 (autopilot) device Failed
> >         messages. I have tried everything and am at a loss. Any
> >         suggestions?
> >         > _______________________________________________
> >         > Paparazzi-devel mailing list
> >         > address@hidden <mailto:address@hidden>
> >         > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
> >
> >         _______________________________________________
> >         Paparazzi-devel mailing list
> >         address@hidden <mailto:address@hidden>
> >         https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
> >         _______________________________________________
> >         Paparazzi-devel mailing list
> >         address@hidden <mailto:address@hidden>
> >         https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
> >
> >
> >     _______________________________________________
> >     Paparazzi-devel mailing list
> >     address@hidden <mailto:address@hidden>
> >     https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden <mailto:address@hidden>
> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel