Does not work with sudo either. Tried that last night I thought maybe a permissions issues as well. It just says it cannot find it.
Try to run sudo ./paparazzi, if you get link established, it will shows you need add to some group
On Fri, Jul 25, 2014 at 10:16 AM, John Voegeli <address@hidden> wrote:
Yes I have permission I followed those steps... Here is the output for the device that shows up when plugging in the Lisa M to USB.
Bus 002 Device 003: ID 1d50:600f OpenMoko, Inc.
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1d50 OpenMoko, Inc.
idProduct 0x600f
bcdDevice 1.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 27
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 1 Device Firmware Update
bInterfaceProtocol 2
iInterface 4
Device Firmware Upgrade Interface Descriptor:
bLength 9
bDescriptorType 33
bmAttributes 9
Will Detach
Manifestation Intolerant
Upload Unsupported
Download Supported
wDetachTimeout 255 milliseconds
wTransferSize 2048 bytes
bcdDFUVersion 1.1a
________________________________________
From:
paparazzi-devel-bounces+address@hidden <paparazzi-devel-bounces+address@hidden> on behalf of Piotr Esden-Tempski <address@hidden>
Sent: Friday, July 25, 2014 3:18 AM
To: Paparazzi UAV devel list
Subject: Re: [Paparazzi-devel] Could not find STM32 device
Hi John,
Do you have permissions to access the DFU device?
http://wiki.paparazziuav.org/wiki/Installation/Linux#Udev_rules
If you run lsusb -v is the Lisa/M listed?
Cheers,
Piotr
On Jul 24, 2014, at 20:57, John Voegeli <address@hidden> wrote:
> Hey all,
>
> Sorry if this has been answered before. I googled and searched all over the site and could not find anything. I have the new Lisa M 2.1 and I am trying to flash it however I keep getting Could not find STM32 (autopilot) device Failed messages. I have tried
everything and am at a loss. Any suggestions?
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel