Re: [Paparazzi-devel] single ok led?

[Piotr Esden-Tempski]

Yes it is able to code more then just OK state. As far as I know the default 
setup is the one described here: 
http://wiki.thequadshot.com/wiki/Mocha_User_Manual#LED_Codes

It should still be a good starting point if you want to do more then that.

Cheers,
Piotr

On Jun 29, 2014, at 20:53, Chris <address@hidden> wrote:

> That is a very important rule and of course i always follow it.
> I just want a single led maybe coding more than a simple "good to go" 
> information
> (by flashing etc) so i can put it on the outside of the fuselage.
> I will check the module today, thank you for the information.
> Chris
> 
> 
> On 06/30/2014 02:04 AM, Piotr Esden-Tempski wrote:
>> Hi,
>> 
>> We already have led_safety_status module 
>> (https://github.com/paparazzi/paparazzi/blob/master/conf/modules/led_safety_status.xml)
>>  it is meant to do exactly what you are asking for. Single LED indicating 
>> the status of the aircraft. It can be configured to indicate if it is OK to 
>> take off based on requirements of your aircraft.
>> 
>> Just as a followup thought, you should also set up your arming procedure in 
>> a way that will prevent arming of your aircraft as long as your takeoff 
>> requirements ore not met.
>> 
>> Regards,
>> Piotr
>> 
>> On Jun 29, 2014, at 15:58, Eduardo lavratti <address@hidden> wrote:
>> 
>>> I have a module that control LED and buzzer.
>>> I can share the code.
>>> 
>>> Sergey (krooz repo) have a good modules for led control too.
>>> 
>>> 
>>> Date: Sun, 29 Jun 2014 18:52:21 +0300
>>> From: address@hidden
>>> To: address@hidden
>>> Subject: Re: [Paparazzi-devel] single ok led?
>>> 
>>> Hi Felix!
>>> Ok you convinced me i will do it :-)
>>> I am also very busy designing some robotic targets for practice shooting :-D
>>> Electronics are somewhat easy but the mechanical stuff is killing me.
>>> Chris
>>> 
>>> 
>>> On 06/29/2014 03:37 PM, Felix Ruess wrote:
>>> Hi Chris,
>>> 
>>> Sounds like a good idea!
>>> I'm rather busy with project work atm and don't have time for it... but 
>>> since you can do it easily, you could implement it and make a pull request 
>>> :-D
>>> 
>>> Cheers, Felix
>>> 
>>> 
>>> On Sat, Jun 28, 2014 at 10:23 PM, Chris <address@hidden> wrote:
>>> Hi.
>>> After making some testing i would like to ask the Paparazzi main developers 
>>> to implement a real easy modification, the ability to have a single led 
>>> (say green) visually indicating to the operator that everything is ok (cpu, 
>>> gps, imu, modem, etc) and the aircraft can be launched.
>>> I can do it easily but i would prefer this to be "officially" implemented 
>>> :-)
>>> Chris
>>> 
>>> _______________________________________________
>>> Paparazzi-devel mailing list
>>> address@hidden
>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> Paparazzi-devel mailing list
>>> 
>>> address@hidden
>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>> 
>>> 
>>> _______________________________________________ Paparazzi-devel mailing 
>>> list address@hidden 
>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>> _______________________________________________
>>> Paparazzi-devel mailing list
>>> address@hidden
>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> 
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> 
> 
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel