paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] single ok led?


From: Chris
Subject: Re: [Paparazzi-devel] single ok led?
Date: Mon, 30 Jun 2014 06:53:12 +0300
User-agent: Mozilla/5.0 (X11; Linux i686; rv:24.0) Gecko/20100101 Thunderbird/24.6.0

That is a very important rule and of course i always follow it.
I just want a single led maybe coding more than a simple "good to go" information
(by flashing etc) so i can put it on the outside of the fuselage.
I will check the module today, thank you for the information.
Chris


On 06/30/2014 02:04 AM, Piotr Esden-Tempski wrote:
Hi,

We already have led_safety_status module 
(https://github.com/paparazzi/paparazzi/blob/master/conf/modules/led_safety_status.xml)
 it is meant to do exactly what you are asking for. Single LED indicating the 
status of the aircraft. It can be configured to indicate if it is OK to take 
off based on requirements of your aircraft.

Just as a followup thought, you should also set up your arming procedure in a 
way that will prevent arming of your aircraft as long as your takeoff 
requirements ore not met.

Regards,
Piotr

On Jun 29, 2014, at 15:58, Eduardo lavratti <address@hidden> wrote:

I have a module that control LED and buzzer.
I can share the code.

Sergey (krooz repo) have a good modules for led control too.


Date: Sun, 29 Jun 2014 18:52:21 +0300
From: address@hidden
To: address@hidden
Subject: Re: [Paparazzi-devel] single ok led?

Hi Felix!
Ok you convinced me i will do it :-)
I am also very busy designing some robotic targets for practice shooting :-D
Electronics are somewhat easy but the mechanical stuff is killing me.
Chris


On 06/29/2014 03:37 PM, Felix Ruess wrote:
Hi Chris,

Sounds like a good idea!
I'm rather busy with project work atm and don't have time for it... but since 
you can do it easily, you could implement it and make a pull request :-D

Cheers, Felix


On Sat, Jun 28, 2014 at 10:23 PM, Chris <address@hidden> wrote:
Hi.
After making some testing i would like to ask the Paparazzi main developers to 
implement a real easy modification, the ability to have a single led (say 
green) visually indicating to the operator that everything is ok (cpu, gps, 
imu, modem, etc) and the aircraft can be launched.
I can do it easily but i would prefer this to be "officially" implemented :-)
Chris

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list

address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


_______________________________________________ Paparazzi-devel mailing list 
address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel





reply via email to

[Prev in Thread] Current Thread [Next in Thread]