[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] Powering Lisa/M 2.0
|
From: |
Piotr Esden-Tempski |
|
Subject: |
Re: [Paparazzi-devel] Powering Lisa/M 2.0 |
|
Date: |
Sat, 3 May 2014 12:20:48 -0700 |
There should be no problem in using more then one BEC on one battery. You have
that situation in most multicopters as ESCs very often include BECs.
Cheers,
Piotr
On May 3, 2014, at 3:59, Dylan Brunello <address@hidden> wrote:
> Hello,
>
> I have a Lisa/M 2.0 configured with the default power jumpers. I'd like to
> power everything in the system from a single battery (3S LiPo). The plan is
> to power the servo rail using the 5V BEC on the ESC. Is it safe to connect an
> additional 5V BEC to the battery and use that to power the Lisa and
> peripherals? My concern is the two BECs on the one battery. Any thoughts
> regarding powering the system in this fashion?
>
> Cheers,
> Dylan
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel